최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.29 no.7, 2013년, pp.47 - 55
이성진 (한국철도기술연구원 고속철도연구본부) , 이일화 (한국철도기술연구원 고속철도연구본부) , 이수형 (한국철도기술연구원 광역도시교통연구본부) , 이진욱 (한국철도기술연구원 고속철도연구본부)
In the element test for coarse granular materials, the grain size distributions of the materials are often adjusted, in case the grain size of coarse material in the field is larger than the available maximum grain size of the laboratory test equipment. In this study, we carried out the large cyclic...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
입경이 큰 조립재료는 무엇에 주로 이용되는가? | 댐, 항만 구조물, 철도 노반, 도로 보조기층 등을 포함한 대부분의 지반 구조물의 축조에는 입경이 큰 조립재료가 널리 이용된다. 이러한 지반 구조물에 대한 정확한 해석과 안전한 설계를 위해서는 사전에 해당 재료에 대한 강도정수 및 변형계수의 확보가 필수적이다. | |
지반 구조물에 대한 정확한 해석과 안전한 설계를 위해서 필수적인 것은 무엇인가? | 댐, 항만 구조물, 철도 노반, 도로 보조기층 등을 포함한 대부분의 지반 구조물의 축조에는 입경이 큰 조립재료가 널리 이용된다. 이러한 지반 구조물에 대한 정확한 해석과 안전한 설계를 위해서는 사전에 해당 재료에 대한 강도정수 및 변형계수의 확보가 필수적이다. 그러나 현재까지 국내에서는 시험장비의 제약 등으로 인해 시험을 통해 실제 필요한 값을 직접 얻기 보다는 기존 문헌 등에서 제시된 값들을 이용하여 해석 및 설계에 활용하는 경우가 대부분이었다(Seo et al. | |
장비에 허용되는 조립재료의 입자크기가 현장에서 사용되는 입자크기에 비해 작은 경우 어떻게 시험을 수행하는가? | 그러나 대형 지반시험 장비를 이용한다 하더라도 장비에 허용되는 조립재료의 입자크기가 실제 현장에서 사용되는 입자크기에 비해 작은 경우가 종종 발생하게 된다. 이러한 경우에는 실제 입자크기를 시험장치의 가용 크기까지 축소시켜 시험을 수행하게 된다. |
ASTM Standard D3999-91 (2003), Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus, West Conshohocken, PA.
Charles, J. A. (1973), Correlation between Labotatory Behavior of rockfill and field performance with particular reference to scammonden Dam. Ph.D Thesis, Univ. of London, U. K.
Hou, Y. J., Xu, Z. P., and Liang, J. H. (2004), Centrifuge modeling of cutoff wall for CFRD built in deep overburden. Proc. of Int. Conf. of Hydropower, Yichan, China, pp.86-92.
JGS 0542-2000 (1999), Method for Cyclic Triaxial Test to Determine Deformation Properties of Geomaterials, Tokyo, Japan.
Kim, B.J., Lim, J.Y., Oh, S.H., and Seo, M.W. (2005), "Effect of Particle size on Rockfill Deformation", Proceedings of KSCE 2005 Conference, pp.5385-5388.
Kim, N.R., Ha, I.S., Shin, D.H., and Kim, M.S. (2012), "Development and Verification of a Large Scale Rsonant Column Testing System", Journal of the Korea Society of Civil Engineers, Vol.32, No.6C, pp.295-304.
Kwater (1999), Standardization of Large Scale Shear TEsts for Rock Materials of a Rockfill Dam, WRRI-GT-99-3, pp.16-18.
Kweon, G.C. (1999), "Alternative Testing Methods for Subgrade and Sub-base Materials Considering Deformational Characteristics of Soils", Ph.D. dissertation, KAIST, Taejon, Korea.
Lee, D.S., Kim, K.Y., Oh, G.D., and Jo, W.K. (2005), "Calculation of Friction Coefficient for Coarse Grained Material According to Diameter Size", Proceedings of KSCE 2005 Conference, pp.5439-5442.
Lee, S.J., Kim, Y.K., Choo, Y.W., Lee, S.H., and Kang, T.H. (2010b), "Development and Verification of Large Triaxial Testing System for Dynamic Properties of Granular Materials", Journal of the Korean Geotechnical Society, Vol.26, No.12, pp.5-17.
Lee, S.J., Kim, Y.K., Lee, I.W., Lee, J.S., and Park J.J. (2010a), "Building of Large Triaxial Testing Apparatus and Static Triaxial Testing for Railway Ballast", Journal of the Korean Society for Railway, Vol.13, No.1, pp.84-91.
Seo, M.W., Ha, I.S., and Kim, B.J. (2007), "Effects of Particle Size and Test Equipments on Shear Behavior of Coarse Materials" Journal of the Korea Society of Civil Engineers, Vol.27, No.6C, pp.393-400.
上本 雄也, 澁谷 啓, 橋元 洋典, 川尻 峻三 (2011), 砂礫盛土材の締固め特性および變形.强度特性に及ぼす粒度特性の影響 地盤工學ジャ一ナル Vol.6, No.2, pp.181-190.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.