최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.14 no.7, 2013년, pp.3170 - 3176
전성택 (인천대학교 기계시스템공학부) , 조진표 (인천대학교 기계.전자 RIC)
In this study, the performance of an impeller according to blade length and pitch angle was studied experimentally by building a variable pitch impeller while changing blade length to review the effect of blade length and pitch angle on a fan's performance and sound characteristics. The pitch angle ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
팬이란 무엇인가? | 팬은 기계적인 에너지를 회전자를 이용하여 기체에 일을 가해 압력과 속도에너지로 변화시켜주는 유체기계로 산업 시스템의 주요 구성 부품이다. 즉, 건물의 공기순환 장치와 터널 및 지하공간의 환기장치, 중장비, 가전제품 및 각종 열교환기의 냉각 장치 등으로 산업 전반에 걸쳐 매우 폭 넓게 사용된다. | |
축류팬의 소음에 영향을 주는 인자는 무엇인가? | 실속영역은 날개에서 유동박리가 발생하고 난류성분이 강해지며 소음도 커지는 등 모든 면에서 비효율적인 영역임이 밝혀져 있다. 축류팬의 소음에 영향을 주는 인자는 여러 가지가 있는데 Fukano[7-10]는 날개의 끝에서 발생하는 후류의 너비가 난류소음의 지배적인 요소임을 알아냈으며, 날개의 수, 현의 길이, 캠버 각 등이 난류 소음의 주요인자로, 캠버 각이 20° 이상이면 후류의 영향이 커져 소음이 커지는 것을 밝혀냈다. | |
피치각 가변형 축류팬의 피치각이 클수록 축동력이 크게 나타나는 이유는 무엇인가? | 모든 날개 길이에서 피치각이 증가하면 축동력이 비례적으로 증가하였는데 피치각이 클수록 증가폭이 크게 측정되었다. 이는 피치각이 클수록 팬 전방의 항력이 크게 발생하기 때문인 것으로 판단된다. |
C. H. Hirsch, and P. Kool, "Measurement of the three dimensional flow field behind an axial compressor Stage", ASME Paper No. 76-GT-18, 1976. DOI: http://dx.doi.org/10.1115/1.3446264
M. Inoue, and M. Kuroumaru, "Three dimensional structure and decay of vortices behind an axial flow rotating blade row", Trans. ASME, Journal of Engineering for Gas Turbines and Power, Vol. 106, No. 3, 1984. DOI: http://dx.doi.org/10.1115/1.3239607
C. A. Poensgen, and H. E. Gallus, "Rotating stall in a single stage axial flow compressor", ASME Paper No. 94-GT-210, 1994. DOI: http://dx.doi.org/10.1115/1.2836625
T. R. Camp, and I. J. Day, "A study of spike and model stall phenomena in a lowspeed axial compressor", Journal of Turbomachinery, Vol. 120, 1998.
C. J. Kim, C. M. Jang, M. Y. Choi, and D. I. Lee, "Effects of pitch angle and maximum camber on an axial flow fan performance", Proceedings of the SAREK 1996 Winter Annual Conference, pp. 269-274, 1996.
C. S. Kim, Y. H. Shin, K. H. Kim, and J. T. Chung, "Experimental study on effects of stagger angle on performance and flow characteristics of axial fan", Proceedings of the SAREK 1999 Summer Annual Conference, pp. 453-457, 1999.
T. Fukano, Y. Kodama, Y. Senoo, "Noise generated by low pressure axial flow fans, I: Modeling of the turbulent noise", Journal of Sound and Vibration, vol 50, pp. 63-74, 1977.
T. Fukano, Y. Kodama, Y. Takamatsu, "Noise generated by low pressure axial flow fans, II: Effect of number of blades, chord length and camber of blade", Journal of Sound and Vibration, vol 50, pp. 75-88, 1977.
T. Fukano, Y. Kodama, Y. Takamatsu, "Noise generated by low pressure axial flow fans, III: Effect of rotational frequency, blade thickness and outer blade profile", Journal of Sound and Vibration, vol 56, pp. 261-277, 1978.
T. Fukano, Y. Kodama, Y. Takamatsu, "The effect of tip clearance on the noise of low pressure axial and mixed flow fans", Journal of Sound and Vibration, vol 105, pp. 291-308, 1986. DOI: http://dx.doi.org/10.1016/0022-460X(86)90158-6
H. Y. Kim, J. H. Hur, S. J. Moon, J. H. Lee, H. S. You, and Y. C. Im, A study on the fan efficiency decrease on the backward flow in an axial fan, Proceedings of the SAREK 2009 Summer Annual Conference, pp. 386-391, 2009.
J. I. Koo, "Study on performance prediction of industrial axial flow fan with adjustable pitch blades", Proceedings of the KFMA(Korea Fluid Machinery Association), Annual Conference, pp. 30-34, 2001.
Korea Standards Association, Testing methods for industrial fans, KS B 6311, 2011.
ANSI/ASHRAE Standard 37, "Standard measurement guide, engineering analysis of experimental data", ASHRAE, 2005.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.