최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Fashion & textile research journal = 한국의류산업학회지, v.15 no.3, 2013년, pp.444 - 451
박미라 (영남대학교 융합섬유공학과) , 김현아 (한국패션산업연구원) , 김승진 (영남대학교 융합섬유공학과)
This paper surveys the physical properties of aramid and aramid/nylon hybrid air-jet textured yarns(ATY) for protective garments according to wet and dry texturing conditions. Aramid and nylon filaments were used to make two kinds of para-aramid ATY and four kinds of aramid/nylon hybrid ATY with dry...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
아라미드 섬유는 무엇인가? | 아라미드 섬유는 열에 강한 튼튼한 방향족 폴리아마이드 섬유이다. 아라미드 섬유는 크게 파라계와 메타계로 대별되는 데파라계 아라미드는 인장강도, 강인성, 내열성이 뛰어나며 고강력·고탄성률의 특성이 있다. | |
nylon 소재의 원사 필라멘트에 ATY가공 거치면 어떤 단점이 생기는가? | 그리고 nylon소재를 사용하는 스포츠용 의류에서도 투습방수성을 부여하기 위해 직물표면에 라미네이팅 혹은 코팅을 거치게 되며 ATY(air textured yarn) 사표면의 루프는 라미네이팅과 코팅시 접착강도를 높혀 박리강도를 높게 하면서 역시 부드러운 촉감과 착용성을 높혀 주기 때문에 대부분의 스포츠웨어용 nylon소재는 원사 필라멘트에 ATY 사가공 공정을 많이 거치게 된다. 그러나 ATY가공을 거치면 접착성과 촉감 특성은 증진되지만 사의 구조가 루프를 형성하면서 헝클어지는(entangled) 형상을 하기 때문에 사의 절단강도와 모듈러스가 저하하는 단점이 발생한다. 따라서 방호복으로 사용되는 aramid사의 경우는 접착성과 촉감 특성을 좋게 하면서 강인성과 방검성을 유지할 수 있는 고강도·고탄성률을 유지시키는 공정조건에 대한 연구가 필요하다. | |
파라계 아라미드와 같은 방호의류용 필라멘트에 부드러운 촉감과 착용성을 부여하는 방법에는 어떤 것이 있는가? | 일반적인 유기섬유와는 다른 우수한 역학적 성질을 바탕으로 보호의류 중에서 방탄방호 및 방검보호 의류에 사용되는 고부가 소재이다(Han & Lee, 2006).이러한 방호의류용 필라멘트에 에어젯트 텍스쳐링(air-jet texturing) 가공을 거치면 딱딱한 필라멘트사 표면에 루프(loop)가 형성되면서 방적사의 사구조를 가져 의류용 소재에 필요한 부드러운 촉감과 착용성을 부여하게 된다. 또한 방호의류직물에 필수적으로 거치는 코팅과 라미네이팅 후 형성된 필름층이 직물과 박리가 발생되지 않으려면 방적사 형태의 사구조가 접착성을 높혀주기 때문에 에어젯트 텍스쳐링 가공이 필요하다. |
Acar, M., & Wray, G. R. (1986). An analysis of the air-jet yarn-texturing process part : The effect of wetting the yarns. Journal of The Textile Institute, 77(6), 359-370.
Acar, M., Bilgin, S., Versteeg, H. K., Dani, N., & Oxenham, W. (2006). The mechanism of the air-jet texturing: The role of wetting, spin finish and friction in forming and fixing loops. Textile Research Journal, 76(2), 116-125.
Bilgin, S., Acar, M., & Versteeg, H. K. (1996). Effect of nozzle geometry on air-jet texturing performance. Textile Research Journal, 66(2), 83-90.
Chand, S. (1995). The role of water in air-jet texturing. Journal of The Textile Institute, 86(3), 438-444.
Demir, A., Acar, M., & Wray, G. R. (1988). Air-jet textured yarns: The effects of process and supply yarn parameters on the properties of textured yarns. Textile Research Journal, 58(6), 318-328.
Dani, N. (2004). The fundamentals of air-jet texturing. Unpublished doctoral dissertation, North Carolina State University, US.
Han, I. S., & Lee, C. B. (2006). Characteristic and application of aramid fiber. Fiber Technology and Industry, 10(4), 339-349.
Kothari, V. K., Sengupta, A. K., Rengasamy, R. S., & Goswami, B. C. (1989). Influence of interfilament friction on structure and properties of air textured yarns. Textile Research Journal, 59(6), 317-323.
Kothari, V. K., Sengupta, A. K., & Goswami, B. C. (1991a). Role of water in air-jet texturing part: Polyester filament feeder yarns with different frictional characteristics. Textile Research Journal, 61(9), 495-502.
Kothari, V. K., Sengupta, A. K., & Goswami, B. C. (1991b). Role of water in air-jet texturing part: Nylon 6 yarns conditioned in different environments. Textile Research Journal, 61(10), 575-580.
Rengasamy, R. S., Kothari, V. K., & Patnaik, A. (2004). Effect of process variables and feeder yarn properties on the properties of core-and-effect and normal air-jet textured yarns. Textile Research Journal, 74(3), 259-264.
Sengupta, A. K., Kothari, V. K., & Srinivasan, J. (1991). Effect of process variables in air-jet texturing on the properties of spun yarns with different structures. Textile Research Journal, 61(12), 729-735.
Sengupta, A. K., Kothari, V. K., & Sensarma, J. K. (1993). Neps in airjet textured yarns. Textile Research Journal, 63(11), 637-642.
Sengupta, A. K., Kothari, V. K., & Sensarma, J. K. (1996). Effect of filament modulus and linear density on the properties air-jet textured yarns. Textile Research Journal, 66(7), 452-455.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.