최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Korean chemical engineering research = 화학공학, v.51 no.5, 2013년, pp.640 - 643
이수진 (경희대학교 화학공학과) , 임상혁 (경희대학교 화학공학과)
On evaporation of water in polystyrene colloidal emulsion, the polystyrene colloidal particles are instantly protruded on the surface of water and are self-assembled by capillary force among the protruded particles. At the same time, the assembly of polystyrene colloidal particles is occurred on the...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
전통적으로 3차원콜로이드광결정을 제조하는 방법은 무엇입니까? | 특히, 균일한 콜로이드 나노입자를 building block으로사용하여자기조립(self-assembly) 현상을 이용하는 bottom-up 방식의 콜로이드 광결정 제조 방법은 저가의 공정을 이용하여 대면적의 3차원 광결정을 얻을 수 있어 많은 관심을받아왔다[5-8]. 전통적으로 3차원콜로이드광결정을제조하는방법은 콜로이드 서스펜젼(suspension)을 가만히 놓아 두어 자연적으로 중력에 의해침전을 시켜서결정을형성하는침전법(natural sedimentation) [9], 젖음성(wettable)이있는기판을콜로이드서스펜젼용액에수직으로침적한 후, 콜로이드 서스펜젼의 용매가증발함에 따라 기판위에 결정이 형성되는 대류조립법(convective assembly) [10] 및 외부 전기장을 이용하여한쪽기판위에결정을형성하는전기영동법(electrophoretic deposition) [11] 등 다양한 콜로이드 광결정 형성 방법이 고안되었다. 전기 영동법을 제외한 나머지 콜로이드 광결정 형성 방법은 수 cm2크기의 결정을 형성하기 위해서 1~2일 정도의 시간을 소요로 한다. | |
전기영동법의 장점 및 단점은 무엇입니까? | 전기 영동법을 제외한 나머지 콜로이드 광결정 형성 방법은 수 cm2크기의 결정을 형성하기 위해서 1~2일 정도의 시간을 소요로 한다. 반면 전기 영동법은 빠른 공정시간 안에 3차원 콜로이드 결정을 형성할 수 있지만, 형성되는 콜로이드 결정의 완성도가 다소 떨어지는 단점이 있다. | |
광결정의 구조는 어떠하며 광결정에 대해서 많은 연구가 진행된 이유는 무엇입니까? | 3차원의 주기적으로 규칙적인 구조를 가지는 광결정은 전반사를 이용하는 광섬유와는 달리 광학적 손실을 최소화할 수 있어 광학적인 광 도파로, 광학용 필터, 센서, 태양전지 등 다양한 응용분야를 가지고 있어 많은 연구가 진행되었다[1-4]. 특히, 균일한 콜로이드 나노입자를 building block으로사용하여자기조립(self-assembly) 현상을 이용하는 bottom-up 방식의 콜로이드 광결정 제조 방법은 저가의 공정을 이용하여 대면적의 3차원 광결정을 얻을 수 있어 많은 관심을받아왔다[5-8]. |
Vogelaar, L., Nijdam, W., van Wolferen, H. A. G. M., de Ridder, R. M., Segerink, F. B., Fluck, E., Kuipers, L. and van Hulst, N. F., "Large Area Photonic Crystal Slabs for Visible Light with Waveguiding Defect Structures: Fabrication with Focused Ion Beam Assisted Laser Interference Lithography," Adv. Mater., 13, 1551-1554(2001).
Loncar, M., Doll, T., Vu kovic, J. and Scherer, A., "Design and Fabrication of Silicon Photonic Crystal Optical Waveguides," J. Lightwave Technol., 18, 1402-1411(2000).
Vlasov, Y. A., Bo, X.-Z., Sturm, J. C. and Norris, D. J., "On-chip Natural Assembly of Silicon Photonic Bandgap Crystals," Nature, 414, 289-293(2001).
Park, S. H. and Xia, Y., "Assembly of Mesoscale Particles over Large Areas and Its Application in Fabricating Tunable Optical Filters," Langmuir, 15, 266-273(1999).
Im, S. H., Lim, Y. T., Suh, D. J. and Park, O. O., "Three-Dimensional Self-Assembly of Colloids at a Water-Air Interface: A Novel Technique for the Fabrication of Photonic Bandgap Crystals," Adv. Mater., 14, 1367-1369(2002).
Im, S. H., Kim, M. H. and Park, O. O., "Thickness Control of Colloidal Crystals with a Substrate Dipped at a Tilted Angle into a Colloidal Suspension," Chem. Mater., 15, 1797-1802(2003).
Lee, J. A., Ha, S. T., Choi, H. K., Shin, D. O., Kim, S. O., Im, S. H. and Park, O. O., "Novel Fabrication of 2D and 3D Inverted Opals and their Application," Small, 7, 2581-2586(2011).
Miguez, H., Meseguer, F., Lopez, C., Blanco, L., Moya, J. S., Requena, J., Mifsud, A. and Fornos, V., "Control of the Photonic Crystal Properties of fcc-Packed Submicrometer $SiO_{2}$ Spheres by Sintering," Adv. Mater., 10, 480-483(1998).
Jiang, P., Bertone, J. F., Hwang, K. S. and Colvin, V. L., "Single-Crystal Colloidal Multilayers of Controlled Thickness," Chem. Mater., 11, 2132-2140(1999).
Rogach, A. L., Kotov, N. A., Koktysh, D. S., Ostrander, J. W. and Ragoisha, G. A., "Electrophoretic Deposition of Latex-Based 3D Colloidal Photonic Crystals: A Technique for Rapid Production of High-Quality Opals," Chem. Mater., 12, 2721-2726(2000).
Yi, G.-R., Moon, J. H. and Yang, S.-M., "Ordered Macroporous Particles by Colloidal Templating," Chem. Mater., 13, 2613-2618 (2001).
Dimitrov, A. S., Dushkin, C. D., Yoshimura, H. and Nagayama, K., "Observations of Latex Particle Two-Dimensional-Crystal Nucleation in Wetting Films on Mercury, Glass, and Mica," Langmuir, 10, 432-440(1994).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.