최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국마린엔지니어링학회지 = Journal of the Korean Society of Marine Engineering, v.37 no.5, 2013년, pp.484 - 492
김성종 (Division of marine engineering, Mokpo national maritime university) , 이승준 (Division of marine engineering, Mokpo national maritime university) , 정상옥 (Division of marine engineering, Mokpo national maritime university)
With the industrial acceleration in a lot of countries of the world, the demand for anti-corrosion and anti-abrasion material increases continuously. Particularly, stainless steel with the fine surface and excellent corrosion resistance is widely used in various industrial fields including ship, off...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
스테인리스강의 특징은? | 이는 가혹한 부식 환경에서도 견딜 수 있는 다양한 금속합 금이 개발되었기 때문에 가능한 일이다. 특히 스테인리스강은 철의 최대 단점인 부식특성을 개선한 합금으로, 내식성과 내마모성이 우수하 다. 또한 금속 자체의 광택으로 미려한 외관은 물론 강도도 우수하여 해마다 수요가 증가하고 있으며 그 적용범위도 확대되고 있다. | |
전기 화학적 부식의 영향을 피하기 위해 제작된 수조의 재료는? | Table 1은 STS 304의 화학적 조성을, 그리고 Figure 1은 캐비테이션 환경하에서 전기화학적 실험을 위한 모식도를 나타냈다.포텐쇼/갈바노스태트(Potentistatic / Galvanostat) 장비를 사용하여 작동전극(STS 304), 기준전극(Ag/AgCl) 그리고 대극(platinum) 으로 전기화학 셀을 구성하였으며, 수조는 전기 화학적 부식의 영향을 피하기 위해 아크릴로 제작하였다. 캐비테이션 실험은 압전 효과 (piezoelectric)를 이용한 진동발생 장치를 사용하 여 대향형 진동법으로 실시하였다. |
G. Okamoto, "Passive film of 18-8 stainless steel structure and its function," Corrosion Science, vol. 13, no. 6, pp. 471-479, 1973.
T. Momma and A. Lichtarowicz, "A study of pressure and erosion produced by collapsing cavitation," Wear, vol. 186-187, pp. 425-436, 1995.
M. K. Lee, S. M. Hong, G. H. Kim, and C. K. Rhee, "Investigation of the impact load and erosive pit damage on the SUS316 and 8.8Al-bronze alloys by cavitation bubble collapse," Journal of the Korean institute of metals and materials, vol. 44, no. 5, pp. 350-358, 2006.
A. J. Sedriks, Corrosion of stainless steels, New York, Wiley-Interscience, 1996.
D. A. Jones, Principles and Prevention of Corrosion, 2ed., Prentice Hall, 1996.
I. R. Jones and D. H. Edward., "An experimental study of forces generated by the collapse of transient cavities in water," Journal of Fluid Mechanics, vol. 7, pp. 596-609, 1960.
A. Karabenciov, A. D. Jurchela, I. Bordeassu, M. Popoviciu, N. Biraau, and A. Lustyan, "Considerations upon the cavitation erosion resistance of stainless steel with variable chromium and nickel content," Earth and Environmental Science, vol. 12, no. 1, 012036, 2010. [Online] Available: http://iopscience.iop.org/1755-1315/12/1/012036
G. Bregliozzi, A. D. Schino, S. I. U. Ahmed, J. M. Kenny, and H. Haefke, "Cavitation wear behaviour of austenitic stainless steels with different grain sizes," Wear, vol. 258, pp. 503- 510, 2005.
A. Al-Hashem and W. Riad, "The effect of duplex stainless steel microstructure on its cavitation morphology in seawater," Materials Characterization, vol. 47, pp. 389-395, 2001.
R. J. K. Wood and S. A. Fry, "The synergistic effect or cavitation erosion and corrosion for Copper and Cupro-Nickel in seawater," Transaction of the The American Society of Mechanical Engineers, vol. 111, pp. 271-277, 1989.
M. S. Han, S. J. Lee, S. K. Jang, and S. J. Kim, "Electrochemical and cavitation characteristics of Al thermal spray coating with F-Si sealing," Corrosion Science and Technology, vol. 9, no. 6, pp. 317-324, 2010.
S. J. Kim and S. J. Lee, "Investigation on electrochemical and cavitation characteristics of rudder materials for ship in sea water," Corrosion Science and Technology, vol. 10, no. 3, pp. 101-107, 2011.
S. J. Kim, K. Y. Hyun, and S. K. Jang, "Effects of water cavitation peening on electrochemical characteristic by using micro-droplet cell of Al-Mg alloy," Current Applied Physics, vol. 12, pp. S24-S30, 2012.
S. L. Coleman, V. D. Scott, B. McEnaney, B. Angell, and K. R. Stokes, "Comparison of tunnel and jet methods for cavitation erosion testing," Wear, vol. 184, no. 1, pp. 73-81, 1995.
C. H Tang, F. T Cheng, and H. C Man, "Effect of laser surface melting on the corrosion and cavitation erosion behaviors of a manganese-nickel-aluminium bronze," Materials Science and Engineering: A, vol. 373, no. 1-2, pp. 195-203, 2004.
J. S. M. Rusby, "The onset of sound wave distortion and cavitation in water and sea water," Ultrasonics, vol. 9, no. 2, p. 124, 1971.
Y. G. Zheng, S. Z. Luo, W. Ke, "Cavitation erosion-corrosion behaviour of CrMnB stainless overlay and Cr13Ni5Mo stainless steel in 0.5 M NaCl and 0.5 M HCl solutions," Tribology International, vol. 41, no. 12, pp. 1181-1189, 2008.
Annual book of ASTM standards G32-92," U.S., 1992.
Y. C. Lin and S. C. Chen, "Effect of residual stress on thermal fatigue in a type 420 martensitic stainless steel weldment," Journal of Materials Processing Technology, vol. 138, no. 1-3, pp. 22-27, 2003.
M. G. Fontana, Corrosion Engineering, 3ed., New York, McGraw-Hill Book Company, 1986.
Y. Zheng, S. Luo and W. Ke, "Effect of passivity on electrochemical corrosion behavior of alloys during cavitation in aqueous solutions," Wear, vol. 262, pp. 1308-1314, 2007.
P. Lacombe, B. Baroux, and G. Beranger, Stainless steels, Les Ulis, France: Les Editions de Physique, 1993.
S. J. Lee and S. J. Kim, "Investigation on potentiostatic corrosion protection technology with cavitation condition for 5083-H116 Al alloy," Transactions of Nonferrous Metals Society of China, 2012, Submitted.
Y. Yamauchi, H. Soyama, Y. Adachi, K. Sato, T. Shindo, R. Oba, R. Oshima, and M. Yanabe, "The suitable region of high-speed submerged water-jets for cutting and peening," Journal of The Japan Society of Mechanical Engineers, vol. 59, no. 557, pp. 16-22, 1993.
K. Hirano, K. Enomoto, E. Hayashi, and K. Kurosawa, "Effect of water jet peening on corrosion resistance and fatigue strength of type 304 stainless steel," Journal of Journal of the Society of Materials Science, Japan, vol. 45, no. 7, pp. 740-745, 1996.
H. Soyama, Y. Yamauchi, T. Ikohagi, R. Oba, K. Sato, T. Shindo, and R. Oshima, "Marked peening effects by high speed submerged water jets," Journal of Jet Flow Engineering, vol. 13, no. 1, pp. 25-32, 1996.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.