참고문헌 (21)

1. ANSYS, ANSYS, Inc. Canonsburg, PA (USA), http://www.ansys.com. 

2. Coote, J.E., Lieven, N.A.J. and Skingle, G.W. (2005), "Sensor placement optimization for modal testing of a helicopter fuselage", Proceedings of the 24th International Modal Analysis Conference (IMAC), Orlando, Fl., USA. 

3. Fedorov, V.V. (1972), Theory of optimal experiments, New York, Academic Press. 

4. Friswell, M.I., Garvey, S.D. and Penny, J.E.T. (1995), "Model reduction using dynamic and iterated IRS techniques", J. Sound Vib., 186(2), 311-323. 

   상세보기

5. Golub, G.H. and Van, L.C.F. (1996), Matrix computations, 3rd Ed., Baltimore: Johns Hopkins University Press. 

6. Heo, G., Wang, M.L. and Satpathi, D. (1997), "Optimal transducer placement for health monitoring of long span bridge", Soil Dyn. Earthq. Eng., 16(7-8), 495-502. 

   상세보기

7. Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F., Soong, T.T., Spencer, B.F. and Yao, J.T.P. (1997), "Structural control: past, present, and future", J. Eng. Mech. - ASCE, 123(9), 897-971. 

   상세보기

8. Kammer, D.C. (1991), "Sensor placement for on-orbit modal identification and correlation of large space structures", J. Guid. Control Dynam., 14(2), 251-259. 

   상세보기

9. Kammer, D.C. (2005), "Sensor set expansion for modal vibration testing", Mech. Syst. Signal Pr., 19(4), 700-713. 

   상세보기

10. Kammer, D.C. and Tinker M.L. (2004), "Optimal placement of triaxial accelerometers for modal vibration tests", Mech. Syst. Signal Pr., 18(1), 29-41. 

    상세보기

11. Kammer, D.C. and Yao, L. (1994), "Enhancement of on-orbit modal identification of large space structures through sensor placement", J. Sound Vib., 171(1), 119-140. 

    상세보기

12. Li, D.S., Li, H.N. and Fritzec, C.P. (2007), "The connection between effective independence and modal kinetic energy methods for sensor placement", J. Sound Vib., 305(4-5), 945-955. 

    상세보기

13. Li, D.S., Li, H.N. and Fritzec, C.P. (2009), "A note on fast computation of effective independence through QR downdating for sensor placement", Mech. Syst. Signal Pr., 23(4), 1160-1168. 

    상세보기

14. Lin, W., Ni, Y.Q. Xia, Y. and Chen, W. H. (2010), "Field measurement data and a reduced order finite element model for Task I of the SHM benchmark problem for high rise structures", Proceedings of the 5th World Conference on Structural Control and Monitoring, Tokyo, Japan. 

15. Meo, M. and Zumpano, G. (2005), "On the optimal sensor placement techniques for a bridge structure", Eng. Struct., 27(10), 1488-1497. 

    상세보기

16. Ni, Y.Q., Xia, Y., Liao, W.Y. and Ko, J.M. (2009), "Technology innovation in developing the structural health monitoring system for Guangzhou New TV Tower", Struct Health Monit., 16(1), 73-98. 

    상세보기

17. Park, Y.S. and Kim, H.B. (1996), "Sensor placement guide for model comparison and improvement", Proceedings of the 14th International Modal Analysis Conference (IMAC), Dearborn, Mi., USA. 

18. Wang, X.L., Qu, W.L. and Liu, H. (2007), "Finite element analysis on dynamic characteristics of super high tower in Guangzhou", J. Wuhan Univ. Technol., 29(1), 142-144. 

19. Yi, T.H., Li, H.N. and Gu, M. (2011), "A new method for optimal selection of sensor location on a high-rise building using simplified finite element model", Struct. Eng. Mech., 37(6), 671-684. 

    상세보기

20. Yi, T.H., Li, H.N. and Gu, M. (2011), "Optimal sensor placement for health monitoring of high-rise structure based on genetic algorithm", Math. Probl. Eng., Article ID 395101, 1-11. 

21. Yi, T.H., Li, H.N. and Gu, M. (2011), "Optimal sensor placement for structural health monitoring based on multiple optimization strategies", Struct. Des. Tall Spec., 20(7), 881-900. 

    상세보기

저자의 다른 논문 :

Yi, Ting-Hua (19) Li, Hong-Nan (7)