최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國染色加工學會誌 = Textile coloration and finishing, v.25 no.3, 2013년, pp.232 - 239
홍영기 (건양대학교 패션디자인산업학과)
In this study, 25gsm melt-blown polypropylene nonwoven for dust-proof/medical masks was finished by the corona discharging treatment. The influence of corona discharging parameters on the filtration efficiency was investigated. Several parameters such as discharging voltage, discharging speed, dista...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
코로나 현상이란 무엇인가? | 코로나 현상은 대전된 얇은 전선이나 침에 물체를 가까이 하여 높은 에너지 전자기장을 형성시키는 것으로, 이온화가 동시에 발생되며, 상대적으로 낮은 온도의 대기압에서 더욱 잘 발생된다. | |
방진마스크는 종류에 따라 어떻게 구분될 수 있는가? | 한편, 방진마스크는 종류에 따라 분리식과 안면부 여과식으로 나뉘고 분리식은 다시 격리식과 직결식으로 나뉘는데, 분리식은 여과재를 자유롭게 교환할 수 있지만 안면부 여과식은 여과재를 교환할 수 없는 특징15-18)이 있다. 방진마스크와 같은 공조 용 여과재는 단순히 기공크기 차이로 걸려주는 부직포 소재가 주종을 이루고 있으며, 낮은 포집효율과 기공 막힘현상, 높은 압력손실 등의 단점이 있다. | |
우수한 여과재를 만들기 위한 노력에는 어떠한 것이 있는가? | 우수한 여과재는 높은 포집 효율과 낮은 압력 손실을 갖는 소재가 필요하다. 최근 이를 극복하기 위해 정전처리가 실용화 되고 있으나 정전처리 시스템은 공개되지 않는 실정이다. |
R. S. Sigmond and M. Goldman, "Electric Breakdown and Discharges in Gases", E. E. Kunhardt and L. H. Luessen(Eds), NATO ASI Ser., 89b, Plenum, New York, pp.1-64, 1983.
E. Occhiello and F. Garbassi, "International Encyclopedia of Composites", S. M. Lee(Ed.), VCH, New York, pp.1-390, 1991.
H. W. Kim, C. Y. Kim, and P. K. Park, Modification of Polymer Surface by Corona Discharge and the Subsequent Graft Polymerization of Acrylamide, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 5(1), 26(1993).
H. W. Kim, M. C. Lee, and P. K. Park, Study on the Gradient Surface of Carboxylic Acid Group Using Corona Discharge Treatment and Subsequent Graft Polymerization, Textile Coloration and Finishing (J. Korean Soc. Dye. and Finish.), 6(2), 17(1994).
B. O. Lee, P. K. Park, H. C. Kim, H. J. Lee, and H. S. Lee, Multi-Functional Finish of Polyester and P/C Blend Fabrics by Corona Discharge(I)-Flame-Retardant and Sanitary Finish, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 9(2), 1(1997).
B. O. Lee, P. K. Park, J. H. Yeo, and H. S. Lee, Multi-Functional Finish of Polyester and P/C Blend Fabrics by Corona Discharge(II) -Multifunctional Finish, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 9(3), 1(1997).
J. D. Lee, Y. K. Hong, and K. S. Bae, Development of Composite Filter with High Performance Meltblown Non-woven, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 17(2), 40(2005).
A. Kravtsov, H. Brunig, and R. Beyreuther, The Electret Effect in Polypropylene Fibers Treated in a Corona Discharge, Advances in Polymer Technology, 19(4), 312(2000).
B. Lowkis and E. Motyl, Electret Properties of Polypropylene Fabrics, J. Electrostatics, 51, 232 (2001).
B. Tabti, L. Dascalescu, M. Plopeanu, A. Antoniu, and M. Mekideche, Factors that Influence the Corona Charging of Fibrous Dielectric Materials Original Research Article, J. Electrostatics, 67, 193 (2009).
K. K. Oh, H. G. Yoon, U. S. Shol, J. M. Yoon, and J. W. Woo, A Study on the Filtration Characteristics of the Electrostatically Charged Non-woven Polypropylene Media, J. Korean Ind. Eng. Chem., 12(4), 434(2001).
A. F. Robert and M. O. Timothy, The Effect of Particle Charge on Penetration in an Electret Filter, IEEE Transactions on Industry Applications, 24, 4(1998).
J. D. Jung, Korea Patent, 1011657630000(2012).
Z. Zuo, T. H. Kuehn, and D. Y. H. Pui, Performance Evaluation of Filtering Facepiece Respirators using Virus Aerosols, American J. Infection Control, 41(1), 80(2013).
D. H. Han, Protection against Aerosols by Particulate Respirators and Fit Performance, Korean J. Environmental Health, 27(2), 30(2001).
D. H. Han, Inward Leakage Test for Particulate Filtering Respirators in Korea, Korean J. Environmental Health, 30(5), 432(2004).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.