최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국건축시공학회지 = Journal of the Korea Institute of Building Construction, v.13 no.5, 2013년, pp.491 - 497
양근혁 (Department of Plant.Architectural Engineering, Kyonggi University)
The objective of the present study is to establish a straightforward mixture proportioning procedure for structural lightweight aggregate concrete (LWAC), and evaluate the selection range of the targeted dry density of concrete against the designed concrete compressive strength. In developing this p...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
구조용 경량골재 콘크리트란 무엇인가? | 구조용 경량골재 콘크리트(lightweight aggregate concrete, LWAC)는 일반적으로 KS F 2534에 부합하는 경량골재를 사용하고, 28일 압축강도가 15 MPa 이상, 기건밀도가 1,400~2,000 kg/m3인 콘크리트로 정의된다[1]. 경량골재 콘크리트는 지속가능 기술 측면에서 다음과 같은 다양한 장점을 갖는다; 낮은 열전도율은 건축물의 냉․난방을 위해 소비되는 에너지와 에너지 사용에 따른 CO2 배출양을 절감할 수 있으며, 낮은 밀도는 부재의 고정하중을 줄임으로서 단면 크기를 줄여 천연자원 소비를 줄일 수 있다[2]. | |
LWAC의 배합설계가 일반골재 콘크리트에 비해 복잡하고 고려해야 할 요소들이 많은 이유는 무엇인가? | 일반적으로 LWAC의 배합설계는 사용골재의 높은 흡수율과 낮은 비중으로 인해 일반골재 콘크리트에 비해 다소 복잡하고 고려해야 할 요소들이 많다. 특히 일반골재 콘크리트와는 달리 배합에 이용되는 경량골재의 비중 및 단위용적중량과 투입 체적은 콘크리트의 압축강도에 중요한 영향을 미친다. | |
LWAC의 현장적용에 있어 경량골재 콘크리트의 생산단계에서부터 어려움이 발생하는 이유는 무엇인가? | 전 세계적으로 지속가능 건설기술에 대한 요구가 증가하고 있으며, 특히 국내에서도 2013년도부터 년간 약 20만 m3의 인공경량골재 생산이 계획되어 있어 LWAC의 적용에 대한 관심은 지속적으로 높아지고 있다. 하지만 LWAC의 현장적용에서는 목표성능에 대한 합리적인 배합설계 방법론 및 유사품질의 골재를 사용한 기존 배합예의 부족으로 콘크리트 생산단계에서부터 어려움이 발생하고 있는 실정이다[3-5]. |
Korea Concrete Institute. Standard specification of concrete. Seoul (Korea): Gimundang; 2009. 360 p.
Sim JI, Yang KH. Structural safety of lightweight aggregate concrete. Magazine of Korea Concrete Institute. 2011 Sep;23(5):27-32.
Choi JJ. Mix proportioning and constructability of lightweight aggregate concrete. Magazine of Korea Concrete Institute. 2011 Sep;23(5):18-26.
ACI Committee 211. Standard practice for selecting proportions for structural lightweight concrete (ACI 211.2-98). Farmington Hills, MI: American Concrete Institute; 1998. 20 p.
Yang KH. Modeling of the mechanical properties of structural lightweight concrete based on size effects. Kyonggi University(Korea); 2011. Report No.: 2009-0067189. Supported by the National Research Foundation of Korea.
Neville AM. Properties of concrete. Edinburgh Gate: Addison Wesley Longman; 1995. 844 p.
AIJ. Guideline and commentary for mixture proportioning of concrete. Tokyo (Japan): Architectural Institute of Japan; 1999. 223 p.
Nowak AS, Szerszen MM. Reliability-based calibration for structural concrete: phase 1: University of Michigan(US); 2001. Report No.: UMCEE 01-01.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.