최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기시설원예ㆍ식물공장 = Protected horticulture and plant factory, v.22 no.1, 2013년, pp.7 - 12
남상운 (충남대학교 지역환경토목학과) , 김영식 (상명대학교 식물식품공학과) , 서동욱 (충남대학교 지역환경토목학과)
Environmental measurements in the many different types of horticultural farms were carried out to evaluate the ventilation performance for multi-span plastic greenhouses according to the eaves height, the number of spans, the existence of side wall vents and the position of roof vents. Hydroponic to...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
겨울철에 밀폐된 온실에서 작물을 재배할 경우 생길 수 있는 문제는? | 시설내의 공기를 외부공기로 치환하는 환기는 실내 온도와 습도를 낮추고, 탄산가스 농도를 유지하는 등의 역할을 하며, 신선한 공기를 도입하기 위해 필요하다(Lindley와 Whitaker, 1996). 겨울철에 밀폐된 온실 내에서 작물을 재배하게 되면, 습도가 높아져서 병충해가 발생되기 쉽고, 탄산가스 농도의 결핍으로 인하여 생육이 불량해지며, 유해가스 농도가 높아져서 작물이 피해를 받을 수 있다. 특히, 일사량이 많은 계절에는 실내온도 상승으로 작물이 고온장해를 받을 수도 있다. | |
증발냉각법에서 중요한 설계인자는? | 여름철 온실에서 작물을 재배하기 위해서는 적절한 고온극복 대책이 필요하다. 비교적 경제적이면서 효율적인 온실의 냉방 방법은 증발냉각법인데, 이 증발냉각법의 도입에서도 환기는 매우 중요한 설계인자이다(Kim 등, 2001). 한편, 이 증발냉각법도 설치비용이 고가여서 사용하고 있는 농가는 거의 없는 실정이고, 가장 경제적인 고온극복 방안으로는 적절한 차광과 자연환기의 극대화이므로 충분한 환기가 이루어질 수 있도록 환기창의 구조를 개선할 필요가 있다고 하였다(Nam, 2000a). | |
우리나라의 온실 중 연동 플라스틱 온실은 어떤 형태인가? | 우리나라의 온실은 거의 대부분 아치형 플라스틱 온실이며, 그 중에서도 단동 온실이 주류를 이루고 연동온실은 20% 정도에 불과하다(Nam 등, 2011). 국내에 보급된 연동 플라스틱 온실은 대부분 1-2W형 또는 이를 수정한 형태로 측고는 2~3m 정도로 낮고, 연동 곡부의 물받이 위에 권취식 천창이 설치되어 있어 환기에 취약한 구조이다. Byeon(2010)은 측고가 2. |
ASAE. 2003. Standards. Heating, ventilating and cooling greenhouses. ASAE. St. Joseph, Michigan. p. 663-670.
BioIn. 2012. Biotechnology trend. Industry No. 465 2000-08-05. Biotech Information Portal (http://www.bioin.or.kr).
Byeon, D.H. 2010. Evaluation of greenhouse functionality according to the change of eaves height. Thesis for the degree of Master. Kyungpook National University (in Korean).
Fernandez, J.E. and B.J. Baily. 1992. Measurement and prediction of greenhouse ventilation rates. Agricultural and Forest Meteorology 58:229-245.
Hellickson, M.A. and J.N. Walker. 1983. Ventilation of agricultural structures. ASAE. St. Joseph, Michigan. p. 103-124, p. 297-319.
Kim, M.K., S.W. Nam, W.M. Seo, Y.C. Yoon, S.G. Lee, and H.W. Lee. 2000. Agricultural strutures engineering. Hyangmoonsa Press. p. 175-183 (in Korean).
Lee, G.M., K.S. Park, Y.I. Kim, and T.H Kim. 1995a. Development of roll-up ventilation system for pipe-constructed plastic film greenhouse. J. Bio. Fac. Env. 4(2):232-239 (in Korean).
Lee, S.Y., H.H. Kim, H. Chun, Y.S. Kwon, and G.M. Lee. 1995b. Improvement of coverings and ventilation methods in 1-2W type vinyl house and growth responses of tomatoes. Proceeding of Bio. Fac. Env. 4(2):97-99 (in Korean).
Li, S. and D.H. Willits. 2008. Comparing low-pressure and high-pressure fogging systems in naturally ventilated greenhouses. Biosystems Engineering 101:69-77.
Lindley, J.A. and J.H. Whitaker. 1996. Agricultural buildings and structures. ASAE. St. Joseph, Michigan. p. 463-484.
Nam, S.W. and Y.S. Kim. 2009. Actual state of structures and environmental control facilities for tomato greenhouses in Chungnam region. Jour. Agri. Sci. 36(1):73-85 (in Korean).
Tachibana, K., K. Hanekura, K. Takahashi, and E. Ohtsuka. 1979. Design and construction of greenhouses for protected horticulture. Ohm Pub. Tokyo. p. 91-103 (in Japanese).
Willits, D.H., C.A. Yunker, and S. Li. 2006. Air exchange rates in a naturally ventilated greenhouse using different vent configurations. Paper No. 06-4095. ASABE. St. Joseph, Michigan.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.