참고문헌 (10)

1. Automobile Technology & Material C Jiang 222 12 9 2008 Jiang, C. and Zhang, Y., “Automobile lightweight material and forming technology,” Automobile Technology & Material, Vol. 222, No. 12, pp. 9-14, 2008. 

2. Journal of Materials Processing Technology M Naderi 211 6 1117 2012 10.1016/j.jmatprotec.2011.01.015 Naderi, M., Ketabchi, M., and Abbasi, M., “Analysis of microstructure and mechanical properties of different high strength carbon steels after hot stamping,” Journal of Materials Processing Technology, Vol. 211, No. 6, pp. 1117-1125, 2012. 

   상세보기

3. Journal of Materials Processing Technology H Karbasian 210 15 2103 2010 10.1016/j.jmatprotec.2010.07.019 Karbasian, H. and Tekkaya, A. E., “A review on hot stamping,” Journal of Materials Processing Technology, Vol. 210, No. 15, pp. 2103-2118, 2010. 

   상세보기

4. Y Xu 2011 Master Thesis of China Academy of Machinery Science & Technology Xu, Y., “Study of hot stamping die technology for ultra high strength steel door beam,” Master Thesis of China Academy of Machinery Science & Technology, 2011. 

5. Y Shi 2007 China Patent, No. 200780007564.6 Shi, Y. and Dao, Z., “Hot stamping die equipment and processing for hot stamping”, China Patent, No. 200780007564.6, 2007. 

6. J Lin 2007 China Patent, No. 200710039606.6 Lin, J., Bao, W., and Zhu, Q., “The cooling system of hot stamping die for ultra-high strength steel,” China Patent, No. 200710039606.6, 2007. 

7. Int. J. Precis. Eng. Manuf. J Chao 13 7 1101 2012 10.1007/s12541-012-0144-x Chao, J., Zhongde, S., and Bailiang, Z., “Hot stamping die design for vehicle door beams using ultra-high strength steel,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 7, pp. 1101-1106, 2012. 

   원문보기 상세보기

8. Casting·Forging·Welding Hot Working Technology Z Xin 41 1 170 2012 Xin, Z., Gao, N., and Zhu, T., “Numerical simulation of hot stamping mold cooling system,” Casting·Forging·Welding Hot Working Technology, Vol. 41, No. 1, pp. 170-174, 2012 

9. Int. J. Precis. Eng. Manuf. J Y Kim 13 9 1501 2012 10.1007/s12541-012-0198-9 Kim, J. Y., Jeon, Y. P., Kim, B. M., and Kang, C. G., “Die design for a center pillar part by process analysis of hot stamping and its experimental verification,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 9, pp. 1501-1507, 2012. 

   원문보기 상세보기

10. Annals of CIRP H Hoffmann 56 1 269 2007 10.1016/j.cirp.2007.05.062 Hoffmann, H., So, H., and Steinbeiss, H., “Design of hot stamping tools with cooling system,” Annals of CIRP, Vol. 56, No. 1, pp. 269-272, 2007. 

    상세보기