최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한토목학회논문집 = Journal of the Korean Society of Civil Engineers, v.33 no.6, 2013년, pp.2359 - 2368
윤성수 (삼성물산(주) 건설부문 미주법인) , 김규선 (삼성물산(주) 건설부문 기술연구센터) , 이진형 (삼성물산(주) 건설부문 기술연구센터) , 신동현 (삼성물산(주) 건설부문 기술연구센터)
Cone penetration tests (CPTs) have been increasingly used for site characterizations. However, the site investigations using CPTs are often limited due to soil conditions depending on the cone size and capacity of the CPT system. The small sectional area of a miniature cone improves the applicabilit...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
CPT의 장점은 무엇인가? | CPT는 일반적으로 10 cm2의 단면적의 표준콘이 사용되며, 대심도 조사를 위해서 15 cm 2의 단면적을 가지는 대형콘이 사용되기도 한다(Yoon, 2009). CPT는 자동화된 계측시스템을 활용하여 원지반의 특성을 연속적으로 조사할 수 있는 장점 때문에 사용이 증가되고 있는 시험법이지만, 표준콘을 사질토 지반에 적용할 경우에는 콘의 지중 관입을 위해서 반력 용량이 큰 대형장비가 요구되고, 약 1 m 길이의 롯드를 반복적으로 연결하면서 시험을 수행해야 하므로, 심도가 깊어질수록 소요 시간 및 비용이 증가하는 단점이 있다. 또한, 콘의 직경이 커지게 되면 관입에 따른 주변지반의 전단변형에 더 넓은 면적이 영향을 미치게 되어, 소성영역을 증가시키므로 측정 해상도가 감소하게 된다(Powell and Quarterman, 1988; Hird et al. | |
CIMCPT 시스템은 어떻게 구성되어 있는가? | 2). 전체적으로 CIMCPT 시스템은1) 연속관입을 위한 코일형 소형콘과 지중 관입을 가능하게 하는 관입장치, 2) 콘의 센서로부터 전기신호를 받아 계측을 가능하게 하는 자료측정 시스템, 3) 조사위치로부터 이동과 현장에서의 작업 및 관입장치에 동력을 전달하고 지중관입을 위한 반력으로 작용하는 조사차량의 세 부분으로 구성되어 있다. 코일은 300회 이상의 코일링(coiling) 및 언코일링(uncoiling)에 견딜 수 있도록 제작되었으며, 일반적인 관입심도는 약 10 m(코일 교체시 최대 20 m) 이다(Tumay and Kurup, 2001). | |
CPT의 심도 및 표준콘 증가에 따른 문제를 해결하기 위해 개발된 것은 무엇인가? | , 2003). 따라서, 관입 시 지반교란을 최소화하고, 측정 해상도를 높이며, 장비 용량을 감소시킬 수 있는 소형콘이 개발되었으며 미주 지역에서는 현장적용 또한 증가하고 있다(Tumay and Kurup, 1997; Kurup and Tumay, 1999; Titi et al., 2001). |
Abu-Farsakh, M. Y., Zhang, Z., Tumay, M. T. and Morvant, M. (2008). "Computerized cone penetration test for soil classification: Development of MS-Windows Software." Journal of the Transportation Research Board, TRR 2053, National Research Council, Washington, D.C., pp. 47-64.
Hird, C. C., Johnson, P. and Sills, G. C. (2003). "Performance of miniature piezocones in thinly layered soils." Geotechnique, Vol. 53, No. 10, pp. 885-900.
Kim, R., Cho, Y., Yoon, S. and Lee, W. (2008). "Effect of the cone's size on the tip resistance of sandy soil." Proc. of the 34th KSCE Conference 2008, pp. 3897-3901 (in Korean).
Kurup, P. U. and Tumay, M. T. (1998). "Calibration of a miniature cone penetrometer for highway applications." Transportation Research Record, No. 1614, pp. 8-14.
Kurup, P. U. and Tumay, M. T. (1999). "Continuous intrusion miniature cone penetration test system for transportation applications." Transportation Research Record, No. 1652, pp. 228-235.
Lima, D. C. and Tumay, M. T. (1991). "Scale effects in cone penetration tests." Proc. of the Geotechnical Engineering Congress 1991, ASCE, Boulder, CO, Vol. 1, pp. 38-51.
Lunne, T., Robertson, P. K. and Powell J. J. M. (1997). Cone penetration testing in geotechnical practice, Chapman & Hall, London.
Powell, J. J. M. and Quarterman, R. S. T. (1988). "Interpretation of cone penetration tests in clays, with particular reference to rate effects." Proc. of the First International Symposium on Penetration, Orlando, FL, Vol. 2, pp. 903-910.
Robertson, P. K. and Campanella, R. G. (1988). Guidelines for Geotechnical Design Using CPT and CPTU, University of British Columbia, Vancouver, Department of Civil Engineering, Soil Mechanics Series 120.
Titi, H. H. and Morvant, M. (2001). "Implementation of miniature cone penetrometer in roadway design and construction." Journal of the Transportation Research Board, TRR 1755, National Research Council, Washington, D.C., pp. 60-68.
Titi, H. H., Mohammad, L. N. and Tumay, M. T. (2000). "Miniature cone penetration tests in soft and stiff clays." Geotechnical Testing Journal, Vol. 23, No. 4, pp. 432-443.
Tumay, M. T. and Kurup, P. U. (1997). Calibration and implementation of miniature electronic cone penetrometers for road and highway design and construction, Louisiana Transportation Research Center, Project No. 88-1GT Final Report.
Tumay, M. T. and Kurup, P. U. (1999). A continuous intrusion miniature cone penetration test system for transportation applications, Louisiana Transportation Research Center, Project No. 96-3GTX Final Report.
Tumay, M. T. and Kurup, P. U. (2001). "Development of a continuous intrusion miniature cone penetration test system for subsurface explorations." Soils and Foundations, Vol. 41, No. 6, pp. 129-138.
Yoon, G. and Lee, K. (2004). Applications of cone penetration test for geotechnical design, Goomibook (in Korean).
Yoon, S. (2009). "Miniature cone penetration tests for detecting the depth of a clay layer." Proc. of the 35th KSCE Conference 2009, pp. 1930-1933 (in Korean).
Yoon, S., Hwang, D., Kim, J. and Ji, W. (2010). "Case studies on the field application of miniature CPT's in South Korea." Proc. of the KGS Fall National Conference 2010, pp. 269-280 (in Korean).
Yoon, S., Ji, W., Kim, J. and Kim, R. (2009). "The field application of miniature cone penetration test system in Korea." Proc. of the KGS Spring National Conference 2009, pp. 349-360 (in Korean).
Zhang, Z. and Tumay, M. T. (1999). "Statistical to fuzzy approach toward CPT soil classification." Journal of Geotechnical and Geoenvironmental Engineering, Vol. 125, No. 3, pp. 179-186.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.