최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국수소 및 신에너지학회 논문집 = Transactions of the Korean Hydrogen and New Energy Society, v.25 no.6, 2014년, pp.609 - 619
도규형 (한국기계연구원 환경.에너지기계연구본부) , 한용식 (한국기계연구원 환경.에너지기계연구본부) , 김명배 (한국기계연구원 환경.에너지기계연구본부) , 김태훈 (한국기계연구원 환경.에너지기계연구본부) , 최병일 (한국기계연구원 환경.에너지기계연구본부)
In the present study, the frequency of the undesired accident was estimated for a quantitative risk assessment of a large-scale hydrogen liquefaction plant. As a representative example, the hydrogen liquefaction plant located in Ingolstadt, Germany was chosen. From the analysis of the liquefaction p...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
액체수소 저장 탱크는 무엇으로 구성되는가? | 액체수소 저장 탱크는 수평방향 실린더 형태로 위치하며, 압력 생성 회로(Pressure Building Circuits), 배관망 등으로 구성된다. 액화수소 저장 탱크의 P&I 다이어그램은 Fig. | |
해양플랜트, 정유, LNG, LPG 등의 에너지 플랜트에 사용되는 물질들이 사고위험이 항상 존재하는 이유는 무엇인가? | 해양플랜트, 정유, LNG, LPG 등의 에너지 플랜트에서는 다양한 종류의 인화성, 발화성, 폭발성, 반응성 등을 가지는 화학물질을 원료, 중간재, 용제, 반제품 및 생산품의 형태로 사용, 취급, 저장하고 있다. 이러한 에너지 플랜트에 사용되는 물질들은 그 보유 량이 방대할 뿐만 아니라 고온/고압의 기체 혹은 증기 상태로 존재하거나 상변화를 일으키는 공정시스템으로 구성되어 있기 때문에, 사고위험이 항상 존재하게 된다. 에너지 플랜트 공정의 사고 위험요소는 플랜 설계의 시작단계부터 수명이 다해 철거될 때까지 일련의 과정에서 상존하고 있으며, 우리나라와 같이 가용 국토가 좁고 인구밀도가 높은 경우, 사고 발생 시 대형 재난사고로 이어져 경제적, 사회적, 환경적 문제를 초래하게 된다. | |
선정된 수소 액화 플랜트는 무엇으로 구성되어 있는가? | 4ton LH2/day로 독일에 설치된 수소 액화 플랜트 중 최대 규모이다. 선정된 수소 액화 플랜트는 압축기 유닛, PSA(Pressure Swing Adsorption) 정제기, 액화기, 그리고 진공단열 액화 수소 저장탱크로 구성된다. RVI Refinery에서 공급되는 약 86%의 수소 농도를 가지는 합성 가스를 20bar 까지 압축하고 PSA 정제기를 이용하여 불순물 농도를 4ppm 이하로 정제한다. |
Khan, F. I., Abbasi, S. A., "Techniques and methodologies for risk analysis in chemical process industries," Journal of Loss Prevention in the Process Industries, Vol. 11, 1998, p. 261-277.
Gross. R., Otto, W. and Wanner, M., "Liquid hydrogen for Europe - the Linde plant at Ingolstadt," Report on Science and Technology, Linde AG, 54, 1994, pp. 37-43.
Linde AG, Tank Installations for the Supply of Liquefied Gases, http://www.linde-gas.com/inter national/web/lg/com/likelgcom30.nsf/repositoryb yalias/8772_6_20tank_20installations/$file/8772_6_Tank_Installations.pdf.
Hauptmanns, U., "Reliability data," Otto-von-Guerucke-University Magdeburg, Germany.
AIChE/CCPS, "Guidelines for process equipment reliability data with data tables," American Institute of Chemical Engineers (AIChE), New York, 1989.
T-book, "Reliability data of components in Nordic nuclear power plants," 3rd Edition, the ATV Office, Vattenfall Support Grafiska, Sweden, 1992.
NUREG/CR-1278, "Handbook of human reliability analysis with emphasis on nuclear power plant applications," 1980.
OREDA 2002, "Offshore reliability data, 4th Edition, OREDA Participants," Det Norske Veritas (DNV), Hovik, Norway, 2002.
GRS, "Ueutsche Risikostudie kernkraftwerke (Phase B)," Gesellschart fur Reaktorsicherheit, Verlag TUV Rheinland, Koln, Germany, 1990.
Lees, F. P., Mannan, S., "Loss prevention in the process industries," Vol. 2, 3rd Edition, Elsevier Butterworth-Heinemann, 2005.
Committee for the Prevention of Disasters, "Methods for the determining and processing probabilities," CPR 12E ("Red book"), 2nd Edition, the Hague, the Netherlands, 1997.
Roos, A. J., "Guidelines for quantitative risk assessment," CRE 18E ("Purple book"), Voorburg, the Netherlands, 1999.
Contini, S., "A new hybrid method for fault tree analysis," Reliability Engineering and System Safety, Vol. 49, 1995, p. 13-21.
Bain, A. "Sourcebook for hydrogen applications," Edited by Tapan K. Bose, TISEC, Canada, 1998.
Cadwallader, C. J., and Herring, J. S., "Safety issues with hydrogen as a vehicle fuel," Idaho National Engineering and Environmental Laboratory, U.S.A, 1999.
IAEA, "Hydrogen as an energy carrier and its production by nuclear power," International Atomic Energy Agency, IAEA-TECDOC-1085, IAEA, Austria, 1999.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.