최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국동력기계공학회지 = Journal of the korean society for power system engineering, v.18 no.6, 2014년, pp.126 - 132
김시영 (부경대학교 기계시스템공학과) , 주창식 (부경대학교 화학공학과) , 구수진 (부경대학교 방위과학연구소)
The P-T characteristics of mixed refrigerant in thermostatic expansion valve sensing bulb were studied using R-134a and R-410A refrigerant. The characteristics of mixed refrigerant were investigated according to pressure variation and the variation of composition ratio of R-134A and R-410A in the te...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
R-410A 냉매는 무엇인가? | R-410A 냉매는 R-32, R-125 냉매가 50:50wt%로 혼합된 유사공비 혼합냉매로 온도글라이드가 매우 작으며(0.1℃) 응축압력이 R-22에 비해 60%정도 높은 고압냉매이다.5-7) R-410A를 적용할 경우 냉매의 열전달특성이 R-22에 비해 우수하며 비체적이 작아 압력강하도 비교적 작아 시스템의 소형화가 가능하며, 단일냉매와 같이 거동하여 취급이 유리 하고 성능이 좋은 우수한 냉매이나, 사용 압력이 높다는 단점이 있다. | |
R-410A를 적용할 경우 어떤 장점을 가지는가? | 1℃) 응축압력이 R-22에 비해 60%정도 높은 고압냉매이다.5-7) R-410A를 적용할 경우 냉매의 열전달특성이 R-22에 비해 우수하며 비체적이 작아 압력강하도 비교적 작아 시스템의 소형화가 가능하며, 단일냉매와 같이 거동하여 취급이 유리 하고 성능이 좋은 우수한 냉매이나, 사용 압력이 높다는 단점이 있다. 또한 R-410A를 시스템에 적용하기 위하여서는 고압냉매의 사용에 따른 내압특성을 충분히 검토하여 신뢰성을 확보하는 것이 필요하다. |
James M. Calm, 2008, "Properties and Efficiencies of R-410A, R-421A, R-422B and R-422D compared to R-22", JMC/RMS-0807a, pp. 1-10.
T. J. Park, M. K. Lee, J. H. Jeong, and K. S. Chang, 2002, "Comparison of Performance Variation between R-22 and R-410A Refrigeration Systems", Kor. J. Air-conditioning and Refrigeration Eng., pp. 166-176
G. J. Park, 2005, "An Experimental Study on the Flow Condensation Heat Transfer of R-22 Alternative Refrigeration in a Multi-Channel flat Tube", IHU master dissertation, pp. 1-7.
United Nations Environment Programme, 1987, "Montreal Protocol on Substances that Deplete the Ozene Layer", Final Act.
H. S. Chang, 2007, "Condensation Heat Transfer Characteristics of R-410A as an Alternative R-22 in the Condenser with Small Diameter Tubes", Clean Technology, Vol. 13, No. 2, pp. 151-158.
J. D. Kim, J. S. Lim and B. G. Lee, 2002, "CFC Alternative Refrigerants", Journal of the Korean Industrial and Engineering Chemistry, Vol. 13, No. 6, pp. 491-501.
H. J. Kim, Y. K. Jung, H. S. Lee, J. I. Yoon and C. H. Son, 2014, "Numerical Study for the Optimal Design of Plate Heat Exchanger Using at Sea Water Air Conditioning", Journal of the Society for Power System Engineering, Vol. 18, No. 4, pp. 29-35.
Wijaya, H. and Spatz, M. W., 1994, "Two-phase Flow Condensation Heat Transfer and Pressure Drop Characteristics", Proceedings of 1994 International Refrigerant Conference at Purdue, USA., pp. 305-310.
Burns, L. D., Hoffman, L., and Schuster, D., 1996, "R-410A Experiences in Unitary Air-conditioner Systems", Proceedings of the International Symposium on HCFC Alternative Refrigerants, Kobe, Japan, pp. 61-66.
www.kvc.com, 1999, "Data sheet danfoss termo statiske ekspansjonsventiler".
D. Andrew et. al., 1968, "Modern Refrigeration and Air Conditioning", Goodheart Willcox. p. 343.
www.spolan.com, 2000, "Refrigerant Pressure Temperature Table"
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.