최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기콘크리트학회논문집 = Journal of the Korea Concrete Institute, v.26 no.6, 2014년, pp.771 - 778
양인환 (군산대학교 토목공학과) , 김경철 (군산대학교 토목공학과) , 조창빈 (한국건설기술연구원 인프라구조연구실)
This paper concerns the flexural behavior of hybrid steel fiber-reinforced ultra high performance concrete (UHPC) beams. It presents experimental research results of hybrid steel fiber-reinforced UHPC with steel fiber content of 1.5% by volume and steel reinforcement ratio of less than 0.02. This st...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
기존의 시멘트계 재료로만 구성된 일반콘크리트는 어떤 단점이 있는가? | 콘크리트 구조물의 장대화, 고층화, 대형화에 따라 콘크리트 재료의 고강도, 고성능, 고내구성 등의 여러 성능이 요구되고 있다. 그러나, 기존의 시멘트계 재료로만 구성된 일반콘크리트는 인장강도와 휨강도가 낮고 파괴 시 취성적인 성질을 나타내고 있어, 최근에 요구되는 여러 성능을 만족시키는데 한계가 있다. 기존 콘크리트의 이러한 단점을 개선하기 위해 콘크리트에 섬유를 혼입한 섬유보강 콘크리트에 대한 여러 연구가 국내외에서 진행되었다. | |
기존의 강섬유 보강 콘크리트의 휨강도 산정식은 어떤 한계가 있는가? | 우리나라의 콘크리트 구조설계기준을 포함한 대부분의 해외 설계기준에도 설계기법이 제한적인 상황이다.14-16) 또한, 기존에 제안된 강섬유 보강 콘크리트의 휨강도 산정식은 초고성능 콘크리트가 아닌 일반적인 강섬유 보강 콘크리트의 휨강도 산정을 대상으로 하고 있으며,17,18) 연구대상 인장철근비가 0.015 이상인 휨 부재를 주된 대상으로 하고 있어 철근비가 낮고 강섬유가 일정부분 인장보강근 역할을 하는 강섬유 보강 초고강도 또는 초고성능 콘크리트의 휨강도를 예측하는 데 한계가 있다. 하이브리드 강섬유 보강 초고성능 콘크리트 보의 더욱 정밀한 휨강도 예측을 개발하기 위해서는 철근비 0. | |
강섬유 보강 콘크리트는 콘크리트의 어떤 특성을 향상시키는가? | 강섬유 보강 초고성능 콘크리트는 콘크리트의 처짐 및 휨강도 특성을 향상시키고, 균열 이후 연성거동 특성을 향상시키는 것으로 알려진 바 있다.9-12) 그러나, 기존의 강섬유 보강 초고성능 콘크리트 연구1,5,8-13)는 주로 단일섬유로 보강된 초고성능 콘크리트에 대해 수행되었으며, 두 가지의 서로 다른 섬유를 혼입한 하이브리드 강섬유 보강 초고성능 콘크리트의 구조거동 특성에 관한 연구는 상대적으로 미비한 실정이다. |
Yang, I.H. and Joh, C.B., "Prediction of Flexural Capacity of Steel Fiber-Reinforced Ultra High Strength Concrete Beams", Journal of the Korean Society of Civil Engineers, Vol. 30, No. 3A, 2010, pp. 317-328.
Yang, I.H., Joh, C., and Kim, B.S., "Structural Behavior of Ultra High Performance Concrete Beams Subjected to Bending", Engineering Structures, Vol. 32, Issue 11, No. 2010, pp. 3478-3487.
Yang, I.H., Joh, C.B., and Kim, B.S., "Flexural Strength of Large Scale Ultra High Performance Concrete Prestressed T-Beams", Canadian Journal of Civil Engineers, Vol. 38, No. 11, 2011, pp. 1185-1195.
Li, V.C. and Fischer, G., "Reinforced ECC - An Evolution from Materials to Structures", Proceedings of the 1st fib congress - Concrete Structures in the 21st Century, pp. 105-122, Osaka, 2002.
DAfStB, State-of-the-art Report on Ultra High Performance Concrete - Concrete Technology and Design, draft 3, Deutscher Ausschuss fur Stahltbeton/German Association for Reinforced Concrete, Berlin, Germany, 2003.
Yuguang, Y., Walraven, J., and Uiji, J.D., "Study on Bending Behavior of an UHPC Overlay on a Steel Orthotropic Deck", Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 639-646.
Si-Larbi, A., Ferrier, E., and Hamelin, P., "Flexural Behavior of Ultra High Performance Concrete Reinforced with Short Fibers and CFRP Rebars", Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, 2008, pp. 661-672.
Chunxiang, Q. and Patnaikuni, I., "Properties of High-Strength Steel Fiber-Reinforced Concrete Beams in Bending", Cement & Concrete Composites, Vol. 21, 1999, pp. 73-81.
Manfred, T. and Jens, G., "Bending Design of Steel-Strengthened UHPC", Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, 2008, pp. 523-532.
Casanova, P. and Rossi, P., "Analysis of Metallic Fibre-Reinforced Concrete Beams Submitted to Bending", Materials and Structures, Vol. 29, No. 190, 1999, pp. 354-361.
Naaman, A.E. and Reinhardt, H.W., "Proposed classification of HPFRC composites based on their tensile response", Materials and Structures, Vol. 39, 2006, pp. 547-555.
American Concrete Institute, "Design Considerations for Steel Fiber Reinforced Concrete", ACI 544.4R-88, ACI Manual of Concrete Practice, Detroit, 1988.
Fedaral Highway Administration, Material Property Characterization of Ultra-High Performance Concrete, 2006, pp. 23-49.
Kooiman, A.G., "Modelling the Post-Cracking Behavior of Steel Fibre Reinforced Concrete for Structural Design Purposes", HERON, Vol. 45, No. 4, 2000, pp. 275-307.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.