최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of Korean Tunnelling and Underground Space Association = 한국터널지하공간학회논문집, v.16 no.6, 2014년, pp.585 - 597
최순욱 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실) , 장수호 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실) , 이규필 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실) , 박영택 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실)
In this study, the cutter acting forces were measured by 3-directional load cell at two different skew angles and various S/d ratios during a series of linear cutting tests using a slim conical pick. The analysis for cutting performance were carried out after calculating average values of the measur...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
픽커터는 무엇으로 구분되는가? | 픽커터는 래디얼타입(radial picks or drag bits)과 포인트어택타입(conical picks or point attack picks)으로 구분할 수 있다. 래디얼타입은 로드헤더의 사용 초기에 연암을 대상으로 주로 적용하였으나, 내구수명이 짧은 문제로 현재는 대부분 포인트어택타입(이후 코니컬커터로 명명)이 사용되고 있다. | |
코니컬커터의 구성은 어떻게 되는가? | 래디얼타입은 로드헤더의 사용 초기에 연암을 대상으로 주로 적용하였으나, 내구수명이 짧은 문제로 현재는 대부분 포인트어택타입(이후 코니컬커터로 명명)이 사용되고 있다. 코니컬커터의 구성을 살펴보면, 암반과 접촉하여 큰 응력을 받는 텅스텐 카바이드 삽입재(insert)와 카바이드 삽입재가 삽입되는 두부(head), 두부와 연결되어 홀더(holder)에 삽입되는 샤프트(shaft)가 있다. 텅스텐 카바이드 삽입재는 매우 높은 수준의 내마모성 재료이고 커팅 헤드의 회전에 의해 발생하는 암반과의 충격에 견딜 수 있을 만큼 인성이 커야 한다. | |
로드헤더는 어떤 상황에서 무엇을 대체할 수 있는가? | 로드헤더(roadheader)는 단면 형상에 크게 제약을 받지 않기 때문에 자유단면 굴착기 또는 부분단면 굴착기(partial-face machine)로 불린다. 이 장비는 터널의 지보재가 설치된 상황에서 터널을 연결하는 피난연락갱 등을 시공할 때 사용하는 발파, 유압브레이커(hydraulic breaker), 스플리터(splitter)를 대체할 수 있다. 또한 유압브레이커 대비 작업속도가 빠른 것으로 알려져 있다(Bilgin et al. |
Asbury, B., Cigla, M., Balci, C. (2002), "Design methodology, testing and evaluation of a continuous miner cutterhead for dust reduction in underground coal mining", 2002 SME Annual Meeting, February 25-27, Phoenix, Arizona, pp. 1-8.
Balci, C., Demircin, M.A., Copur, H., Tuncdemir, H. (2004), "Estimation of optimum specific energy based on rock properties for assessment of roadheader performance", The Journal of The South African Institute of Mining and Metallurgy, December 2004, pp. 633-642.
Bilgin, N., Kuzu, C., Eskikaya, S. (1997), "Cutting performance of rock hammers and roadheaders in Istanbul Metro drivages", Proceedings, Word Tunnel Congress'97, Tunnels for People, Balkema, pp. 455-460.
Copur, H., Balci, C., Tumac, D., Bilgin, N. (2011), "Field and laboratory studies on natural stones leading to empirical performance prediction of chain saw machines", International Journal of Rock Mechanics & Mining Sciences, Vol. 48, pp. 269-282.
Fowell, R.J., OCHEI, N.N. (1984), "A comparison of dust make and energy requirements for rock cutting tools", International Journal of Mining Engineering, Vol. 2, pp. 73-83.
Gertsch, R., Gertsch, L., Rostami, J. (2007), "Disc cutting tests in colorado red granite: implications for TBM performance prediction", International Journal of Rock Mechanics & Mining Sciences, Vol. 44, pp. 238-246.
Goktan, R.M., Gunes, N. (2005), "A semi-empirical approach to cutting force prediction for pointattack picks", The Journal of The South African Institute of Mining and Metallurgy, Vol. 105, April 2005, pp. 257-264.
Hurt, K.G., Evans, I. (1981), "Point attack tools: an evaluation of function and use for rock cutting", Mining Engineer, Vol. 140, pp. 673-675.
Kim, E., Rostami, J., Swope, C. (2012), "Full scale linear cuttting experiment to examine conical bit rotation", Journal of Mining Science, Vol. 48, No. 5, pp. 882-895.
Nilsen, B., Ozdemir, L. (1993), "Hard rock tunnel boring prediction and field performance", Proc. of Rapid Excavation and Tunneliing Coference (RETC), pp. 833-852.
Rostami, J., Ozdemir, L., Neil, D.M. (1994), "Application of heavy duty roadheaders for underground development of the yucca mountain exploratory study facility, high level radioactive waste management", Proceedings of the 5th Annual international conference, Vol. 2, pp. 395-402.
Rostami, J. (2013), "Cutterhead design procedures and performance evaluations for roadheader, final report submitted to korea institute of construction technology", August 2013, Jamal Rostami Engineering Services LLC.
Tunnel Business Magazine (2011), "Roadheaders in hard rock-east side access among north american projects employing roadheader technology", February 2011, pp. 20-21.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.