최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.30 no.1, 2014년, pp.5 - 16
유충식 (성균관대학교 건축토목공학부) , 김대현 (성균관대학교 초고층장대교량학과)
This paper presents the results of an investigation into the pullout characteristics of screw anchor pile using field pullout tests. A series of field pullout tests were performed on screw anchor piles with different geometric characteristics such as shaft and screw diameters. The results indicated ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
스크류 앵커의 장점은 무엇인가? | 스크류 앵커 파일(Screw Anchor Pile, 이하 SAP라 칭함)은 강봉에 스크류를 부착하여 압축지지력과 인발저항력을 높이기 위해 개발되었으며 호주 및 북미에서는 굴착 및 사면보강시 인장부재로 사용되어 꾸준히 연구되고 있다. 이러한 스크류 앵커는 기존의 일반 앵커 혹은 네일링 공법에 비해 동일 길이에서 우수한 인발 저항력을 확보할 수 있으며 시공성이 우수한 것으로 알려져 있다. 유사한 공법으로 헬리컬 스크류 앵커 파일(Piletech, 2012)을 들 수 있는데 사면 보강 및 가시설 굴착공사에 적용되고 있다. | |
SAP의 적용분야는? | 1은 SAP의 개요도 보여주고 있는데 제작과정을 살펴보면 먼저 도넛형태의 모양으로 개별적으로 절단된 스크류들을 용접으로 연결하고 일정한 피치 간격으로 늘린 후 회전관입시 발생되는 토크에 저항할 수 있도록 샤프트 부분에 제작된 스크류를 추가적으로 용접하여 SAP가 제작된다. 적용분야로는 기초분야에서 상업・주거건물이나 민자역사, 철탑기초, 소구경 도로시설물의 기초로 사용될 수 있으며 교량기초 추가 보강이나 리모델링 건축물과 부력앵커 대용으로 적용할 수 있다. 또한 사면과 흙막이 분야에서는 소일 네일링이나 어쓰 앵커, 락 앵커, 스트럿의 역할을 수행하여 사면안정에 사용되고, 터널보강시 락볼트 대용으로도 적용된다. | |
스크류 앵커 파일의 개발 목적은 무엇인가? | 스크류 앵커 파일(Screw Anchor Pile, 이하 SAP라 칭함)은 강봉에 스크류를 부착하여 압축지지력과 인발저항력을 높이기 위해 개발되었으며 호주 및 북미에서는 굴착 및 사면보강시 인장부재로 사용되어 꾸준히 연구되고 있다. 이러한 스크류 앵커는 기존의 일반 앵커 혹은 네일링 공법에 비해 동일 길이에서 우수한 인발 저항력을 확보할 수 있으며 시공성이 우수한 것으로 알려져 있다. |
Adams, J.I. and Hayes, D.C. (1967), "The uplift capacity of shallow foundations", Ontario Hydro Research Quarterly, Vol.19, No.1, pp. 1-13.
Cerato, A. B. and Victor, R. (2008), "Effects of helical anchor geometry on long-term performance for small wind tower foundations subject to dynamic loads", Journal of the Deep Foundations Institute, Vol.2, pp.30-41.
Cho, C. H. (2010), Pile Engineering Handbook, E&G-Book.
Ghaly, A., Hanna, A., and Hanna, M. (1991a), "Uplift behavior of screw anchors in sand. I: Dry sand", ASCE, J.Geotech. Engrg. Vol.117, No.5, pp.773-793.
Ghaly, A., Hanna, A., and Hanna, M. (1991b), "Uplift behavior of screw anchors in sand. II: Hydrostatic and Flow Conditions", ASCE, J.Geotech. Engrg. Vol.117, No.5, pp.794-808.
Ghaly and Clemence (1998), "Pullout performance of inclined helical screw anchors in sand", ASCE, J.Geotech. Engrg., Vol.124, No.7, pp.617-627.
Kim, D. H. and Yoo, C. (2013), "Pull-out Capacity of Screw Anchor Pile in Sand Using Reduced-Scale Model Tests", Journal of Korean Geotechnical Engineering, Vol.28, No.1, pp.121-133.
Mitsch, M.P. and Clemence, S. P. (1985), "The uplift capacity of helix anchors in sand: Uplift Behavior of Anchor Foundations in Soil", Proc., ASCE, New York, N. Y., pp.26-47.
Pack, J.S. (2000), "Design of Helical Piles for Heavily Loaded Structures", ASCE, New technological and Design Development in Deep Foundations, pp.353-367.
Piletech (2012), http://www.piletech.co.nz
Saeedy, H.S. (1987), "Stability of circular vertical earth anchors", Canadian geotechnical journal, Vol.24, No.3, pp.452-456.
Vickars, R.A. and Clemence, S.P. (2010), "Performance of Helical Piles with Grouted Shafts", ASCE, New Technological and Design Developments in Deep Foundations, pp.327-341.
Yoo, C., Shin, B. N., and Jang, D. W. (2010), "A study on optimization of screw anchor pile's geometry", Proceedings of Korean Geosynthetics Conference, pp.119-131.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.