최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.26 no.1, 2014년, pp.42 - 47
김현경 (한밭대학교 환경공학과) , 엄태인 (한밭대학교 환경공학과) , 문승현 (한국에너지기술연구원) , 윤형기 (한국에너지기술연구원) , 방기영 (에이에이치테크)
Adequate relative humidity is needed in the common living space, for human health, and industrial space, for maintenance and efficiency. Evaporative humidifier systems generally have slow response tendencies of air loads, but relatively low initial investment and maintenance costs. Humidification ef...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
공조용 가습기 방식에는 무엇이 있나요? | 일반적으로 공조용 가습기 방식에는 크게 스팀식, 분무식, 기화식이 이용되고 있다. 이 중 기화식 가습기는 부하에 따른 반응이 다소 느린 경향이 있으나 스팀 설비가 필요 없어 상대적으로 초기투자비용과 유지비가 저렴하고 에너지 사용 측면에서도 유리하다. | |
기화식 가습기는 어떻게 구성되어 있는가? | 기화식 가습기에서는 주로 상부에서 하부로 물을 공급하여, 설치된 얇은 가습모듈을 적셔, 이 모듈을 흐르는 주변 공기와 열전달, 물질 전달을 통하여 가습이 이루어지는 시스템으로 구성되어 있다. 따라서 가습모듈의 재질, 형태, 배열 방법은 출구 공기의 온도, 습도뿐만 아니라 압력손실의 변수가 된다. | |
기화식 가습기의 기능과 적용되는 곳은? | 이 중 기화식 가습기는 부하에 따른 반응이 다소 느린 경향이 있으나 스팀 설비가 필요 없어 상대적으로 초기투자비용과 유지비가 저렴하고 에너지 사용 측면에서도 유리하다. 게다가 가습에 사용되는 섬유상의 소재가 오염물질을 제거 하는 필터와 같은 기능도 가져, 클린룸과 같이 공기청정도가 필요한 건물에 많이 적용되고 있다. (3) |
Park, S. T., Kim, J. C., Band, Y. S., Lee, T. J., and Wang J. Y., 2007, Evaporative humidifier(Evaporative air cooling humidifier), Proceeding of SAREK Summer Annual Conference(2007-6), SAREK, p. 148.
Wetmaster, Products List, Japan, pp. 4-6.
Sung, M. K., Kato Shinsuke, and Kim, M. S., 2011, Sterilization of evaporative humidifier in air handling unit for cleanroom using ultraviolet irradiation, Proceedings of the KIAEBS 2011 Autumn Annual Conference, KIAEBS, pp. 41-44.
Yu, S., Kim, H., Lee, Y., Lee, S., Choi, W., and Ahn, K., 2008, A model of membrane humidifier for the residential power generation fuel cell, Proceeding of the KSME 2008 Thermal and Fluid Engineering Divisions Spring Annual Meeting, KSME, pp. 93-96.
Lee, K.-B., 1992, Heat and mass transfer between hot waste gas and cold water in a direct contact heat exchanger, Transaction of KSME B, Vol. 16, No. 6, pp. 1171-1178.
Ko, G. H., Son, S. Y., Ro, K. C., and Ryou, H. S., 2009, Numerical study on the liquid film formation and heat transfer of the impinging sprays on the hot surface, Proceeding of KSME 2009 Autumn Annual Meeting(2009. 11), pp. 1772-1777.
Kim, H. J., Ro, K. C., Ryou, H. S., and Hur, N., 2008, Development of a general purpose thermo/fluid flow analysis program NUFLEX with wall impingement and heat transfer analysis model of liquid film, Journal of KSCFE, Vol. 13, No. 2, pp. 68-72.
ANSYS Inc., 2012, Theory Guide, pp. 589-602.
Springer, T. E., Zawodzinski, T. A., and Gottesfeld, S. 1991, Polymer Electrolyte Fuel Cell Model, J. Electrochemical Soc, Vol. 138, No. 8, pp. 2334-2341.
Kumar, A., 2008, Use of Air Side Economizer for Data Center Thermal Management, Georgia Institute of Technology, p. 46.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.