최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.18 no.1, 2014년, pp.138 - 149
오병관 (연세대학교 건축공학과) , 이지훈 (대림산업(주)) , 최세운 (연세대학교 건축구조헬스케어연구단) , 박효선 (연세대학교 건축공학과) , 김유석 (연세대학교 건축구조헬스케어연구단)
This study proposes an estimation method of strain distribution for multi-span steel beam structure under unspecific loading conditions. The estimation method in this paper employs the curve fitting using the least square method from measured strain data, not analytical method. To verify the propose...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
기존 전기저항식 센서와 같은 포인트 센서의 단점은? | 이들 센서는 다시 부재 내 계측 범위에 따라 상대적으로 게이지 길이가 긴 센서와 포인트센서로 분류할 수 있다. 기존 전기저항식 센서와 같은 포인트 센서는 국부적인 변형률 계측만이 가능하여 시공 중 또는 후에 발생할 수 있는 작용하중 크기 및 위치가 변화할 경우 구조물 안전성 평가를 합리적으로 수행할 수 없다. 이에 대한 보완으로서 센서의 수를 늘리게 되면 데이터 량의 증가로 인해 계측 데이터의 저장 및 분석의 어려움이 발생한다. | |
구조물 건전도 모니터링은 어떻게 수행되는가? | , 2013). 실제 구조물에 각종 계측 센서 (가속도계, 변위계, 변형률계)를 설치하여 정기적으로 혹은 실시간으로 계측을 수행하게 되며, 대표적인 구조 응답으로는 가속도, 변위 그리고 변형률 등을 들 수 있다. 특히, 변형률의 계측을 통해서 산출되는 최대응력은 설계기준 (AISC, 2000)에서 제시된 허용응력과의 비교를 통해서 구조물의 안전성 평가 지표로 널리 활용되고 있으며, 이를 추정하기 위한 변형률 기반의 구조 건전도 모니터링 연구가 부재 단위로 활발히 진행되고 있다 (Hampshire and Adeli, 2000; Park et al. | |
광섬유 브래그 격자 센서의 장점은? | 그러나 긴 게이지 길이 구간에서의 변형률 평균값을 계측하기 때문에 부재 내 특정 위치에 발생하는 최대 변형률을 직접 계측할 수 없다. 한편, 광섬유 브래그 격자 센서 (Optical fiber bragg grating sensor, FBG)는 비록 포인트 센서이지만, 멀티플렉싱 기술 (Choi et al., 2013; Grattan and Sun, 2000; Li et al., 2004; Majumder et al., 2008; Chan et al., 1999)이 적용됨으로써 적은 수의 센서를 이용하여 부재의 최대 변형률을 직접 계측할 수 있다. 멀티플렉싱은 하나의 신호 안에 여러 신호를 담을 수 있는 기술로, 여러 개의 센서를 하나의 선으로 연결하여 각 센서에서 계측한다수의 데이터를 단일 신호로 전달할 수 있다. |
AISC (2005), Steel Construction Manual, American Institute of Steel Construction (AISC), Chicago, IL.
Chan, P. K. C., Jin, W., Gong, J. M., Demokan, M. S. (1999), Multiplexing of fiber Bragg grating sensors using an FMCW technique, IEEE Photonic Technology Letter, 11, 1470-1472.
Choi, S. W., Lee, J., Oh, B. K., Park, H. S. (2013), Analytical models for estimation of the maximum strain of beam structures based on optical fiber bragg grating sensors, Journal of Civil Engineering and Management (Accepted).
Grattan, K. T. V., Sun, T. (2000), Fiber optic sensors technology: an overview, Sensors and Actuators A: Physical, 82(1-3), 40-61.
Hampshire, T. A., Adeli, H. (2000), Monitoring the behavior of steel structures using distributed optical fiber sensor, Journal of Constructional Steel Research, 53, 267-281.
Lee, H. M., Park, H. S. (2013), Measurement of maximum strain of steel beam structures based on average strains from vibrating wire strain gages, Experimental Techniques, 37, 23-29.
Lee, J. H., Choi, S. W., Park, H. S. (2013), A Regressionbased Estimation of Strain Distribution for Safety Monitoring of the Steel Girder Subjected to Uncertain Loads, Journal of the Korea Institute for Structural Maintenance and Inspection, 17(2), 10-20 (in Korean).
Li, H. N., Li, D. S., Song, G. B. (2004), Recent application of fiber optic sensors to health monitoring in civil engineering, Engineering Structures, 26(11), 1647-1657.
Lioe, R., Wong, W. (2012), The Sands Hotel and Sands SkyPark, The Arup Journal, 1, 17-20.
Majumder, M., Gangopadhyay, T. K., Chakraborty, A. K., Dasgupta, K., Bhattacharty, D. K. (2008), Fibre Bragg gratings in structural health monitoring-Present Status and applications, Sensors and Actuators A: Physical, 147(1), 150-164.
Park, H. S., Jung, H. S., Kwon, Y. H., Seo, J. H. (2006), Analytical models for assessment of the safety of steel beams based on average strains from long gage optic sensors, Sensors and Actuators A: Physical, 125, 109-113.
Park, H. S., Jung, S. M., Lee, H. M., Kwon, Y. H., Seo, J. H. (2007), Analytical models for assessment of the safety of multi-span steel beams based on average strains from long gage optic sensors, Sensors and Actuators A: Physical, 137, 6-12.
Park, H. S., Park, K. T., Lee, K. W. (2001), An Experimental Study on Characteristic Analysis of Deflection Response of RC Structures Using Measured Strain, Journal of the Korea Institute for Structural Maintenance and Inspection, 5(3), 173-180 (in Korean).
Park, H. S., Shin, Y., Choi, S. W., and Kim, Y. (2013), An Integrated Structural Health Monitoring System for the Local/Global Response of a Large-Scale Irregular Building under Construction, Sensors, 13, 9085-9103.
Tam, H., Au, H. Y., Chung, K. M., Liao, W. Y., Chung, W. H., Liu, S. Y., Lai, S. Y., Lai, C. C., Ni, Y. Q., Csipkes, A. (2011), Distribution Optical Sensor System on the 610-m Guangzhou New TV Tower, Optical Fiber Communication Conference, Los Angeles.
Yu, F., Gupta, N. (2005), An efficient model for improving performance of vibrating-wire instruments, Measurement: Journal of the International Measurement Confederation, 37(3), 278-283.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.