최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조시스템학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.23 no.1, 2014년, pp.64 - 68
박용민 (Department of Mechanical and Mechatronics Engineering, Kangwon National University) , 방현철 (Department of Mechanical and Mechatronics Engineering, Kangwon National University) , 서영호 (Department of Mechanical and Mechatronics Engineering, Kangwon National University) , 김병희 (Department of Mechanical and Mechatronics Engineering, Kangwon National University)
This paper introduces the use of a crown-shaped (CR) lens to effectively diffuse the light from a light-emitting diode (LED) without any loss in the light intensity, in contrast to polymer-bulb-type diffusers. The diffusion lens was designed based on the Snell's law, which describes the physical pat...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
눈의 피로를 유발하는 LED 소자 문제점의 원인은 무엇인가? | 이와 같은 문제의 원인은 Fig. 1(a)에서와 같이 LED 소자가 램버시안(lambertian) 배광(light distribution)[6]을 갖는점 광원 특성을 가지고 있기 때문이며, LED 소자로부터 방출되는 빛은 주변부에 비해 중심부의 광 밀도가 집중되어 높은 휘도를 나타내는 특징을 갖는다. LED 소자의 발광(luminous) 특성과 이에 따른 국부적인 광 집중에 의한 눈부심 현상은 반사컵(reflector)[7]과 렌즈나 확산판(diffuser plate)[8] 및 확산벌브(diffusion bulb) 와 같은 2차 광학계(optical system)[9] 적용을 통해 소자로부터 방출되는 빛을 확산시킴으로써 문제를 해결해온 것이 일반적이었다. | |
LED 조명시스템으로부터 일정 거리의 영역에 대해 고른 빛 분포를 형성하기 위해 제안된 방법은? | 또한 LED 조명시스템으로부터 일정 거리의 영역에 대해 고른 빛 분포를 형성하는 것은 여전히 기술적인 난제로 이를 해결하기 위한 방안들이 연구 보고되어 왔다. 균일한 빛의 분포와 눈부심 현상을 감소시키기 위해 제안된 대표적인 연구로는 2차원 표면에 대한 미세 구조화방법[10]과 렌즈 형상변화 [11] 등이 있으며, 이 방법들은 2차 광학계로써 LED 선단부에 실장하거나 확산시트(diffusion sheet)에 적용하여 문제를 해결하고자 하였다. | |
LED광원의 장단점은 무엇인가? | LED (Light Emitting Diode)는 소형화를 비롯한 다양한 형상으로의 디자인이 용이하고 빠른 응답특성에 의해 스위칭이 많은 다양한 장치의 표시램프(display lamp)로 사용되어 왔으며[1,2], 광출력 개선에 대한 진보로 최근에는 일반조명을 비롯한 가로등, 보안등의 옥외조명으로써 적용 가능한 새로운 광원[3]으로 각광 받고 있다. 이와 같은 조명으로써의 LED광원은 효율, 수명, 광 제어 및환경적인 면에서 기존의 조명대비 우수한 특성[4]을 나타내는 반영 구적인 광원이지만, 상대적으로 제조비용이 크며, 특히 LED 광원이 갖고 있는 고유의 광 프로파일은 눈부심 효과(glare effect)를 야기시켜 사용자로 하여금 눈의 피로를 유발하는 등의 문제[5]가 발생하고 있다. 이와 같은 문제의 원인은 Fig. |
Zheludev, N, 2007, The life and times of the LED-100-year history, Nature Photonics 1:4 189-192.
Song, Y. J., Hong, M. S., 2011, A Study on the Optimal Design for Optical Efficiency of LED, Korean Society of Manufacturing Technology Engineers 20:3 361-367.
Sun, C. C., Lo, Y. C., Tsai, C. C., Lee, X. H., Chien, W. T., 2012, Anti-glare LED projection lamp based on an optical design with a confocal double-reflector, Optics Communications 285:21-22 4207-4210.
Chen, W. C., Lai, T. T., Wang, M. W., Hung, H. W., 2011, An optimization system for LED lens design, Expert Systems with Applications 38:9 11976-11983.
Kasahara, T., Aizawa, D., Irikura, T., Moriyama, T., Toda, M., Iwamoto, M., 2006, Discomfort Glare Caused by White LED Light Sources, Journal of Light & Visual Environment 30:2 95-103.
Shei, S. C., Lin, N. M., Chang, S. J., Wu, Y. X., 2011, Optical design of a freeform lens based on multi-chip-on- single-board LED light source for 140W street lamp, International Journal of Science and Engineering 1:1 31-33.
Chen, E., Yu, F., 2013, Design of LED-based reflector-array module for specific illuminance distribution, Optics Communications 289:15 19-27.
Song, S., Sun, Y., Lin, Y., You, B., 2013, A facile fabrication of light diffusing film with LDP/polyacrylates composites coating for anti-glare LED application, Applied Surface Science 273:15 652-660.
Chen, C., Xianhui, Z., 2011, Design Secondary Optical System Applied in White-LED General Illumination, Journal of Physics: Conference Series 276:1 012159(6 page).
Giel, B. V., Meuret, V., Thienpont, H., 2007, Using a fly's eye integrator in efficient illumination engines with multiple light-emitting diode light sources, Optical Engineering 46:4 043001(6 page).
Wang, K., Liu, S., Chen, F., Qin, Z., Liu, Z., Luo, X., 2009, Freeform LED lens for rectangularly prescribed illumination, Journal of Optics A: Pure and Applied Optics 11:10 105501(10 page).
Lo, Y. C., Huang, K. T., Lee, X. H., Sun, C. C., 2012, Optical design of a Butterfly lens for a street light based on a double-cluster LED Microelectronics, Reliability 55:5 889-893.
Chen, H. C., Lin, J. Y., Chiu, H. Y., 2013, Rectangular illumination using a secondary optics with cylindrical lens for LED street light, Optics express 21:3 3201-3212.
Wolf, K. B., Krotzsch, G., 1995, Geometry and dynamics in refracting systems, European Journal of Physics 16:1 14-20.
Simons, R. H., Ben, A. R., 2001, Lighting Engineering applied calculations, Elsevier Ltd..
Park, Y. M., Kim, B. H., Seo, Y. H., 2013, Three-Dimensional Antireflective Hemispherical Lens Covered by Nanoholes for Enhancement of Light Transmission, Appl. Phys. Express 6:11 115202(4 page).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.