최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.27 no.1, 2014년, pp.45 - 53
신대환 (경희대학교 건축공학과) , 조은선 (경희대학교 건축공학과) , 김민숙 (경희대학교 건축공학과) , 김희철 (경희대학교 건축공학과) , 이영학 (경희대학교 건축공학과)
In strength limit states design, it is assumed that after cracking, reinforcement carries all tension in the tension zone of reinforced concrete members. However, it can be seen the concrete between cracks will contribute to carrying a part of the tension stress in actual concrete members particular...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Tension stiffening 효과란 무엇인가? | 강도 한계상태 설계에서는 균열이 일어난 이후 철근콘크리트 부재의 인장영역에서 철근이 모든 인장력을 부담하는 것으로 가정한다. 그러나 균열 사이의 콘크리트가 실제 콘크리트 부재에서는 특히 사용하중 수준에서의 어느 정도의 인장 응력을 견디는데, 일조 하는 것으로 보고 있다. 이러한 효과를 Tension stiffening 효과라 한다. 본 연구에서는 Tension stiffening 모델과 고강도 철근 콘크리트 보의 휨 실험결과의 비교를 통해 해석모델의 유효성을 평가 하고자 한다. | |
Tension stiffening 모델의 접근 방법은 어떤 것이 있는가? | Tension stiffening 모델의 접근 방법에는 크게 두 가지 가 있다. 첫 번째는 균열이 발생 전과 발생 후의 유효 휨 강 성()을 보간하는 방법이다. 이는 ACI 318, BS 8110과 CEB를 포함한 설계기준에서 일반적으로 사용되고 있다. 두 번째는 콘크리트 부재에 처음 균열이 발생하고 난 이후의 응 력-변형률 관계에서 하향점을 계산하여 콘크리트의 응력-변 형률 관계를 모델화 한 방법이다. Scanlon(1972), Lin 등 (1975), Owen 등(1984) 모델이 이 방법을 적용하여 Tension stiffening을 고려하고 있다. | |
철근 콘크리트 부재에서 Tension stiffening 효과를 고려하지 않을 경우 어떤 문제점이 있는가? | 이를 Tension stiffening 효과라 한다. 철근 콘크리트 부재에서 Tension stiffening 효과를 고려하지 않을 경우, 사용하중 상태에 있어 부재의 강성이 과소평가 되어 처짐의 정확한 예측이 어렵게 된다 (Lee et al., 1998). 따라서 균열 발생 후의 정확한 해석 및 거동의 평가를 위해서 Tension stiffening 효과는 고려 되어야 할 중요한 요소다. |
ACI Committee 318-11 (2011) Building Code Requirements for Reinforced Concrete(ACI 318-11) and Commentary, American Concrete Institute, Farmington Hills.
Branson, B.E. (1963) Instantaneous and Time-Dependent Deflections of Simple and Continuous Reinforced Concrete Beams, Alabama Highway Department, Bureau of public roads, HPR Publication 7, pp.1-78.
British Standard Committee (1997) British Standard Code: Design of Concrete Structures (BS 8110-1: 1997), British Standards.
Choi, B.S. (1998) Variability of Reinforced Concrete Beam Deflections, PhD Thesis, The Pennsylvania State University, USA.
Choi, S.W., Yang, J.H., Kim, W. (2010) Influence of Tension Stiffening Effect on Delfection and Crack Width in RC Members, KCI Concrete Journal, 22(6), pp.761-768.
Comite Euro-International du Beton (CEB) (1993) CEB-FIP Model Code 1990, Thomas Telford, London.
Damjanic, F., Hinton, E., Owen, D.R.J., Bicanic. N., Simovic, V. (1984) Proceedings of the International Concrete on Computer-Aided Analysis and Design of Concrete Structures Part I.Pineridge Press, Swansea, U.K, pp.693-706.
Lee, B.H., Hong, C.W., Chang, D.I. (1998) Failure Behavior and Tension Stiffening of RC Tension Members, J. Korean Soc. Civ. Eng., 18(3-3), pp.483-494.
Lee, J.C. (2003) Comparative Study of Tension Stiffening Models in Reinforced Concrete Beams, Thesis, The Pennsylvania State University, USA.
Lin, C.S., Scordelis, A.C. (1975) Nonlinear Analysis of RC Shell of General Form, Journal of the Structural Division, ASCE, ST3, pp.523-538.
Murashev, V.E. (1940) Theory of Appearance and Opening of Cracks, Computation of Rigidity of Reinforced Concrete Members, Stroitelnaya Promishlenost, Moscow.
Noh, S.Y., Kim, Y.R., Jung, J.C. (2012) Effective Moment of Inertia in Reinforced Concrete Beams based on the Moment-deflection Relation, Architectural Research, 28(10), pp.3-10.
Scanlon, A. (1972) Time Dependent Deflections of Reinforced Concrete Slabs, PhD Thesis, University of Alberta, Canada.
The Mathworks (2011) MATLAB Version 7.12(The Language of Technical Computing) User's Manual, The Mathworks.
Yoon. S.H., Kim, J.S., Yum, H.S., Kim, W. (1998) Tension Stiffening Effect of High Strength Concrete, KCI Concrete Journal, 10(2), pp.495-500.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.