최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.30 no.2, 2014년, pp.33 - 42
한영철 (연세대학교 토목공학과) , 임현성 (연세대학교 토목공학과) , 정상섬 (연세대학교 토목공학과)
The shear strength and deformation characteristics of granular soils at low confining stresses differ from those with high confining stresses. Thus, the clear understanding of geotechnical problems related to the low confining stress state such as the stability of shallow foundations, embankments, s...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
원위치의 낮은 응력상태에서 사질토 지반의 거동에 대한 연구가 중요한 이유는? | 원위치의 낮은 응력상태에서 사질토 지반의 거동에 대한 연구는 지표 혹은 지표에 가까이 설치되는 얕은 기초 지반의 안정성, 제방 및 호안, 사면의 얕은 파괴, debris 파괴, 혹은 액상화 등의 해석에 있어 매우 중요하다. 특히 기초 및 제방의 지지력, 터널의 주변지반 거동 등을 파악하기 위하여 수행하는 각종 모델실험(1g-test)의 결과를 분석하는데 있어 매우 낮은 응력에서의 전단 및 변형특성을 명확히 파악할 필요가 있다. | |
모래 시료의 전단강도는 어떤 경향을 보이는가? | 일반적으로 모래 시료는 전단시 팽창과 수축이 발생 하며, 전단강도(내부마찰각, Φ)는 상대밀도(relative density) 가 클수록 또는 구속응력(effective confining stress σe′) 이 작을수록 증가하는 경향을 나타낸다. 그러나 매우 낮은 구속응력 상태에서 시행하는 모델실험은 높은 stress level에서 관찰되는 거동과 상당한 차이가 있다. | |
매우 낮은 구속응력 상태에서 시행하는 모델실험이, 높은 stress level에서 관찰되는 거동과 차이가 있는 이유는? | 그러나 매우 낮은 구속응력 상태에서 시행하는 모델실험은 높은 stress level에서 관찰되는 거동과 상당한 차이가 있다. 그 이유로서는 Ponce and Bell(1971)는 입자간의 겉보기 점착력으로 간주하였으며(Lancelot et al., 2006), 또한 재료의 본질적인 특성과 경계조건과 같은 외적인 요소에 의해 발생한다고 알려져 있다(Macari-Pasqualino et al., 1994) |
Ahn, B.H. (2002), A Study on the Characteristics of the Jumunjin Standard Sand by Triaxial Compression Tests, MSc Thesis, Changwon National University.
ASTM D7181 (2011), "Standard test method for consolidated drained triaxial compression test for soils", ASTM international.
Duncan, J. and Bursey, A. (2013), "Soil Modulus Correlations", Foundation Engineering in the Face of Uncertainty, Geo-Congress 2013, pp.321-336.
Evans, T. M. (2005), "Microscale Physical and Numerical Investigations of Shear Banding in Granular Soils", PhD Dissertation, Georgia Institute of Technology.
Fukushima, S. and Tatsuoka F. (1984), "Strength and deformation characteristics of saturated sand at extremely low pressures", Soils and Foundations, 24(4): pp.30-48.
Greeuw, G., Adel, H., Schapers, A., and Haan, E. (2001), "Reduction of Axial Resistance due to Membrane and Side Drains in the Triaxial Test", Soft Ground Technology, pp.30-42.
Hardin, B.O. and Black, W.L. (1966) "Sand stiffness under various triaxial stresses", J. of Soil Mechanics & Foundations Div, Vol.92, SM2, pp.27-42.
Hong, W.P., Song, J.S., and Hong, S.W. (2010), "Punching Shear Failure in Pile-Supported Embankments", J. of the Korean Geotechnical Society, Vol.26, No.3, pp.35-45.
Hoque, E. and Tatsuoka, F. (1998), "Anisotropy in the elastic deformation of materials", Soils and Foundations. (38)1:163-179.
Im, J.C., Lee, T.H., and An, M.H. (2000), "A Study on the Estimation of Internal Friction Angle of Sand Ground through the Bearing Capacity Experiment", J. of Korean Society of Civil Engineers, v.20 n.6-C. pp.495-506.
Jiang, G.L., Tatsuoka, F., Flora, A., and Koseki, J. (1997), "Inherent and stress-state-induced anisotropy in very small strain stiffness of a sandy gravel", Geotechnique, Vol.47, Issue 3, 01 June 1997, pp. 509-521.
Ju, J.W., Choi, H.N., Park, J.B., and Park, J.K. (1997), "A Production of Triaxial Specimen and Shear Characteristics of Gumunjin Standard Sand", Proceedings of Korean Society of Civil Engineers, Vol.3, 1997. pp.189-192.
Kohata, Y., Tatsuokaj, F., Wang. L., Jiang, G.L., Hoque, E., and Kodaka, T. (1997), "Modelling the non-linear deformation properties of stiff geomaterials", Geotechnique, Vol.47, Issue 3, 01 June 1997, pp.563-580.
Lade, P.V. and Kim, M.K. (1988), "Single hardening constitutive model for frictional materials III. Comparisons with experimental data", Computers and Geotechnics, Vol.6, Issue 1, 1988, pp.31-47.
Lancelot, L., Shahrour, I., and Al Mahmoud, M. (2006), "Failure and Dilatancy Properties of Sand at Relatively Low Stresses", J. of Engineering Mechanics, ASCE, Vol.132, No.12, December 2006, pp.1396-1399.
Lee, K. P., Matchala, S. and IM, J. C. (2008), "Shear Strength of Jumunjin Sand according to Relative Density", Marine Georesources and Geotechnology, 26: pp.101-110.
Lee, K. L. (1970), "Comparison of Plane Strain and Triaxial Tests on Sand", J. of Soil Mech. Found. Div., ASCE, Vol.96, no.SM3, pp.901-923.
Macari-Pasqualino, E. J., Runesson, K., and Sture, S. (1994), "Response prediction of granular materials at low effective stresses", J. of Geotechnical Engineering, ASCE, Vol.120, No.7, July, 1994. pp.1252-1268.
Paik, K.H. and Lee, J.H. (2008), "Calculation of Bearing Capacity of Tapered Drilled Shafts in Cohesionless Soils Using Shape Factor", J. of the Korean Geotechnical Society, Vol.24, No.12, 2008. pp. 13-22.
Park, C.S. and Bae, S.H. (2002), "Deformation and Strength Characteristics of Jumunjin Standard Sand by Triaxial Test", Engineering Research & Technology, Vol.2, pp.399-403.
Park, C.S. and Tatsuoka, F. (1990), "Deformation and strength characteristic under low confining pressure of the Silver Leighton Buzzard sand by plane strain compression test", Poceedings of annual conference, JSCE, Vol.45, 1990.9. pp.742-743 (in Japanese).
Ponce, V. M. and Bell, J. M. (1971), "Shear Strength of Sand at Extremely Low Pressures", J. of the Soil Mechanics and Foundations Division, ASCE, 97(SM4), pp.625-636.
Schanz, T. and Vermeer, P. A. (1998), "On the stiffness of sands- Pre-failure Deformation Behaviour of Geomaterials", Geotechnique 48, pp.383-387.
Tatsuoka, F., Goto, S., and Sakamoto, M. (1986), "Effects of some factors on strength and deformation characteristics of sand at low pressures", Soils and Foundations, Vol.26, No.1, pp.105-114.
Yoon, H.C. (2002), "A study on the stress-dilatancy relationships of sand according to the stress path", MSc Thesis, Kyonggi University (in Korean).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.