최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.38 no.3, 2014년, pp.259 - 267
Fatigue tests were performed in various simulated body environments reflecting various factors (such as body fluids, artificial saliva) relevant within a living body. First, the fatigue limit under a simulated body environment (artificial saliva) was evaluated and the governing factors of implant fa...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
치과용 임플란트에 있어서 내구성이 중요한 이유는? | 치과용 임플란트의 제작에 있어서 임플란트의 내구성의 제고는 환자에 대한 고통의 경감과 치과의사의 시술 안정성을 위해 중요하다. | |
부동태피막의 특징은 무엇인가? | 치과용 임플란트에 주로 쓰이는 티타늄 및 그 합금의 부동태피막(Passive film)은 대단히 치밀하여, 생체유사환경 속에서의 수년간에 걸친 침적 시험에서도 거의 부식되지 않는다. 그럼에도 불구하고 최근 임플란트 시술을 한 사람이나 동물에서 부식 손상의 현상이 보고되고 있다. | |
기존 임플란트의 피로강도에 대한 연구의 한계점은 무엇인가? | 임플란트의 피로강도에 관하여 기존에 진행된 연구들은 대부분 실험실 내의 건전환경 하에서 수행되었다. (2,3) 즉 구강내의 체액, 세포막 전위(Cell membrane potential) 수준의 미소전류, 저작력 등과 같은 다양한 인자들의 복합적인 작용을 고려하지 않은 연구들이다. 이러한 연구들은 임플란트가 매식된 구강 내에서의 생체역학적인 다양한 특성들을 반영한 연구라고 할 수 없다. |
Jemt, T. and Lekholm, U., 2003, "Oral Implant Treatment in Posterior Partially Edentulous Jaws: a 5-Year Follow-up Report," International Journal of Oral and Maxillofacial Implants, Vol. 8, pp. 635-640.
Boggan, R. S., Strong, J. T., Misch, C. E. and Bidez, M. W., 2003, "Influence of Hex Geometry and Prosthetic Table Width on Static and Fatigue Strength of Dental Implants," The Journal of Prosthestic Dentistry, Vol. 82, No. 4, pp. 436-440.
Son, J. H., Yang, Y. S. and Lee S. Y., 2005, "Fatigue Life Estimation of Implant Using a Finite Element Method," Trans. Korean Soc. Mech. Eng. A, No.22, pp. 998-101.
Long, M. J. and Rack, H. J., 1998, "Titanium Alloys in Total Joint Replacement," Materials Science Perspective Biomaterials, Vol. 19, pp. 1621-1639.
Esposito, M., Hirsch, J. M., Lekholm, U. and Thomsen, P., 1998 "Biological Factors Contributing to Failures of Osseointegrated Oral Implants (II) Etiopathogenesis," European Journal of Oral Sciences, Vol. 106, pp. 721-764.
Lee, B. J. and Kim, M. G., 2003, "An Electrochemical Approach to Development of a Method for Accelerated Strength Evaluation of Hard Tissue Replacement Materials," METALS AND MATERIALS International, Vol. 9, No. 2, pp. 215-219.
"Dentistry-Implants-Dynamic Fatigue Test for Endosseous Dental Implants," ISO 14801, The International Organization for Standardization. 2007.
Lee, B. J., Jun, K., Masao, S., 1999, "Corrosion Fatigue Behavior of Ti-6Al-4V Ally in Simulated Physiological Envirnment," Biomaterial, Vol. 17, No. 1. pp.24-31.
Kim, M. G., 2011, "Fatigue Properties on the Failure Mode of a Dental Implant in a Simulated Body Environment," METALS AND MATERIALS International 17-5, pp.705-711.
Kim, M. G., 1999, "A Study of the Ruling Factor of Fatigue Limit of Nitrided Titanium Using Fluidized Bed Furnace," Trans. Korean Soc. Mech. Eng. A, No. 23, pp. 31-36.
Adell, R., Erikkson, B., Lekholm, U., Branemark, P. I. and Jemt, T.,1990, J. Oral Maxillofac Implants Int. 5, pp.347-359.
Morita, T., Kato, K., Shimizu, M. and Kawasaki, K., 1997, "Comparison of Fatigue Properties of Nitrided Pure Iron and Titanium," Trans. of the JSME(A), No.63-605, pp. 1-6.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.