최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.30 no.5, 2014년, pp.25 - 35
신국진 (경북대학교 지질학과) , 오제헌 (경북대학교 지질학과) , 정용욱 (계명대학교 첨단건설재료실험센터) , 김교원 (경북대학교 지질학과)
The sedimentary rocks exposed around Mt. Palgong were subjected to metamorphism due to a granitic magma intrusion at late Cretaceous, and they eventually metamorphosed to hornfels by the action of both hydrothermal solution and high temperature supplied from the magma. The hornfels zone around the g...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
팔공산 주변 혼펠스의 특징은? | 팔공산의 중심부인 고지대에는 화강암이 분포하고 있으며 화강암 경계는 뚜렷하지만 퇴적암과의 혼펠스의 경계는 점이적으로 변하기 때문에 경계선을 설정하기가 곤란하다. 팔공산 주변 혼펠스는 원암인 퇴적암 특히 셰일에 비하여 암석강도가 매우 크고 풍화 저항성이 높은 것이 특징이다. 또한 팔공산의 경사가 급경사를 이루다가 주변부 혼펠스 지대에서는 경사가 완만하게 변한다는 것이 특징적이다(Yoon et al., 2004). | |
화강암 경계부로부터 멀어질수록 혼펠스의 변성도가 낮아지는 근거는? | 본 연구에서는 5개 선별된 지역의 35개 지점에서 채취한 신선한 암석시료에서 350개의 공시체를 성형하여 실내시험을 수행하였다. 시험결과 함수비와 흡수율은 화강암 경계부와 멀어질수록 증가하였지만, 단위중량, 초음파속도, 점하중강도 및 슬레이크 내구성 지수는 감소하였다. 이는 화강암 경계부로부터 멀어질수록 혼펠스의 변성도가 낮아짐을 의미하는데, 거리에 따른 특성치의 변화 및 특성치와의 상관성을 회귀 분석하여 관계식을 제시하였다. | |
혼펠스의 변성도는 화강암체와의 거리에 따라 어떻게 되는가? | , 1996). 이러한 혼펠스의 변성도는 화강암체에 가까울수록 커지고 거리가 멀어짐에 따라 약해져서 결국에는 변성되지 않은 퇴적암으로 변한다. 칠곡층의 화강암과 혼펠스의 경계부의 노두에서 화강암질 마그마가 셰일의 층리면을 따라 관입암상(sill)으로 관입하면서 주변 퇴적암을 혼펠스로 변성시킨 것이 확인되었다. |
Chang, K. H. (1977), Late Mesozoic Stratigraphy, Sedimentation and Tectonics of Southeastern Korea, Journal of The Geological Society of Korea, 13(2), pp.76-90.
Chang, K. H. and Park, S. O. (1997), Aspects of Tectonics and Volcanism Recorded in Cretaceous Medial Kyongsang Basin, SE Korea, Economic and Environmental Geology, 30(2), pp.143-151.
Gamble, J. C. (1971), Durability-plasticity classification of shales and other argillaceous rocks, Ph. D., thesis, University of Illinois, 159p.
Gwon, S. H. (2013), Structural characteristics of the Palgongsan Granite and its teconic implication, Master's thesis Kyungpook National University, pp.1-57.
ISRM (1985), Suggested Method for determining point load strength, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract, 22(2), pp.51-60.
Jenks, G. F. (1967), The Data Model Concept in Statistical Mapping, International Yearbook of Cartography, 7, pp.186-190.
Kim, G. W. and Kim, S. J. (2006), Correlation between Engineering Properties of Rocks in Korea, The Journal of Engineering Geology, 16(1), pp.49-58.
Kim, G. W., Lee, H. B., Kim, S. R., and Park, N. S. (1996), Geotechnical Investigation Manual, Seoul City, pp.1-135.
Kim, H. G., Kim, T. K., and Oh, K. H. (2010), Analysis of Mechanical Properties and Slake Durability of Fresh to Weathered Cretaceous Shale, The Journal of Engineering Geology, 20(3), pp. 311-318.
Kwag, S. M. (2013), Engineering properties of red shale and black shale in Daegu, Korea, Master's thesis Kyungpook National University, pp.1-52.
Lee, S. W., Lee, C. H., and Jeong, J. H. (1996), Petrology of Palgongsan Granite and Contact Metamorphic Rocks in the Contact Aureoles, The Journal of College of Education, 33, pp.277-309.
Suh, M. C., Song, I. S., and Choi, H. S. (2002), The structural safety diagnosis of Dabo Pagoda of Bulkuk Temple using analyses of ultrasonic wave velocity, Journal of Korean Geophysical Society, 5(3), pp.199-209.
Yoon, S. O., Cho, W. Y., and Hwang, S. I. (2004), The geomorphic development of the Mt. Palgong in relation to Geology in Northern Daegu City of Korea, Journal of The Geological Society of Korea, 40(1), pp.77-92.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.