최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.18 no.3, 2014년, pp.28 - 39
김우석 (금오공과대학교 건축학부) , 강현구 (서울대학교 건축학과) , 김화중 (경북대학교 건축토목공학부)
This paper reviews past literatures relevant to fire-resistance properties of high strength concrete and investigates spalling mechanism of high strength concrete in fire. First, literatures were reviewed on spalling occurrence and fire-resistance methods. Second, a chemical change of concrete compo...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
화재시 고강도 콘크리트는 어떤 문제가 발생하는가? | 일반적으로 콘크리트는 다른 구조재료에 비해 열전도율과 열 확산계수가 현저히 낮아 대표적인 내화구조재료로서 널리 사용되어지고 있으나, 화재시 콘크리트 내부온도 가 600℃ 이상이 되면 급격한 재료물성의 내력저하 (strength degradation)가 발생하는 것으로 알려져 있다. 더욱이 보통강도 콘크리트에 비해 낮은 물시멘트비 (w/c ratio)와 치밀한 콘크리트 미세조직구조를 가진 고강도 콘크리트는 화재시 내부 수증기압 증가 및 내부 열응력 증가에 의한 폭렬 (spalling) 현상과 공극량 증가에 의한 내력저하가 발생하기 때문에 이에 따른 원인 분석과 대책이 절실하게 필요한 실정이다. | |
고강도 콘크리트의 폭렬문제를 방지하기 위한 방안으로 무엇이 있는가? | 이에 국내외 다수의 연구자들은 화재발생시 고강도 콘크리트의 폭렬문제를 해결하기 위하여 다양한 폭렬발생 메커 니즘을 분석하고 폭렬방지 공법 개발 및 내화공법의 현장적 용 사례 등에 관한 연구를 진행하였다. 이러한 폭렬현상을 방지하기 위한 방안으로는 콘크리트의 온도상승을 억제하는 방법, 내부 수증기를 빠르게 배출시키는 방법, 횡구속 등을 통해서 콘크리트의 비산을 억제하는 방법 등이 있다. 이중 내부 수증기를 빠르게 외부로 배출시키는 방법으로서 콘크리 트 비빔시 폴리프로필렌섬유 (PP섬유: Poly-Propylene fiber) 를 혼입하여 화재시 섬유가 녹아 생긴 통로 (path)를 통해 내 부 수증기를 배출하고 수증기압을 낮추어 폭렬을 방지하는 방법이 가장 경제적이고 안전한 방안으로 보고되었다 (Kalifa et al. | |
내부 수증기를 빠르게 외부로 배출시키는 방법 중 어떤 방법이 가장 경제적이고 안전한 방안으로 보고되었는가? | 이러한 폭렬현상을 방지하기 위한 방안으로는 콘크리트의 온도상승을 억제하는 방법, 내부 수증기를 빠르게 배출시키는 방법, 횡구속 등을 통해서 콘크리트의 비산을 억제하는 방법 등이 있다. 이중 내부 수증기를 빠르게 외부로 배출시키는 방법으로서 콘크리 트 비빔시 폴리프로필렌섬유 (PP섬유: Poly-Propylene fiber) 를 혼입하여 화재시 섬유가 녹아 생긴 통로 (path)를 통해 내 부 수증기를 배출하고 수증기압을 낮추어 폭렬을 방지하는 방법이 가장 경제적이고 안전한 방안으로 보고되었다 (Kalifa et al., 2000; Xiao and Falkner, 2006; Noumowe et al. |
Arioz, O. (2007), Effects of Elevated Temperatures on Properties of Concrete, Fire Safety Journal, 42, 516-522.
Castillo, C., and Durrani, A. J. (1990), Effect of Transient High Temperature on High-Strength Concrete, ACI Materials Journal, 87(1), 47-53.
Consolazio, G. R., McVay, M. C., and Rish III, J. W. (1998), Measurement and Prediction of Pore Pressures in Saturated Cement Mortar Subjected to Radiant Heating, ACI Materials Journal, 95(5), 525-536.
Hammer, T. A. (1995), High-Strength Concrete Phase 3, Compressive Strength and E-modulus at Elevated Temperatures, Fire Resistance, SP-6, STF70-A95023, Report 6.1, SINTEF Structures and Concrete.
Han, C. G., Han, M. C., and Heo, Y. S. (2007), New Proposal for Spalling Mechanism in High Strength Concrete, Journal of the Architectural Institute of Korea, 23(11), 109-117 (in Korean, with English abstract).
Han, C. G., Han, M. C., Kim, W. K., and Lee, J. S. (2009), Effect of Admixture Types and PP Fiber on the Development of Spalling Resistance of High Strength Concrete, Journal of the Architectural Institute of Korea, 25(11), 105-112 (in Korean, with English abstract).
Han, C. G., Hwang, Y. S., and Jung, D. W. (2003), Performance of Spalling Resistance of High Performance Concrete with PP Fiber Contents and Lateral Confinement, Journal of the Architectural Institute of Korea, 19(1), 61-68 (in Korean, with English abstract).
Han, C. G., Jee, S. W., Kim, K. M., Heo, Y. S., and Kim, S. H. (2006b), Investigation of Fire Resistance Performance of High Performance Concrete Containing PP & PVA Fiber, Journal of the Architectural Institute of Korea, 22(10), 77-84 (in Korean, with English abstract).
Han, C. G., Kim, S. S., Kim, S. S., and Jang, K. H. (2008b), Preventing Spalling of High Performance Concrete Depending on the Length Variation and Contents of NY & PP Fibers, Journal of the Architectural Institute of Korea, 24(11), 69-76 (in Korean, with English abstract).
Han, C. G., Yang, S. H., Han, M. C., and Pei, C. C. (2008a), The Influence of Polymer Contents and Appearance on Spalling Prevention of High Strength Concrete, Journal of the Architectural Institute of Korea, 24(5), 93-100.
Han, M. C., and Choi, H. K. (2011), The Effect on Mechanical Properties and Micro-structure of High Strength Concrete at Elevated Temperatures, Journal of the Architectural Institute of Korea, 27(3), 123-130 (in Korean, with English abstract).
Hertz, K. D. (1992), Danish Investigations on Silica Fume Concrete at Elevated Temperatures, ACI Materials Journal, 89(4), 345-347.
Hong, S. W., and Yang, K. H. (2005), An Evaluation on the Variation of Mechanical Properties of High-Strength Concrete Subjected to High Temperature, Journal of the Architectural Institute of Korea, 21(12), 43-50 (in Korean, with English abstract).
Husem, M. (2006), The Effects of High Temperature on Compressive and Flexural Strengths of Ordinary and High-Performance Concrete, Fire Safety Journal, 41, 155-163.
Janotka, I., and Bagel, L. (2002), Pore Structures, Permeabilities, and Compressive Strengths of Concrete at Temperatures up to $800^{\circ}C$ , ACI Materials Journal, 99(2), 196-200.
Jung, H. K., Son, H. J., Lee, B. H., Han, M. C., Yang, S. H., and Han, C. G. (2009), Spalling of the High Strength Concrete Depending on Specimens Size, Proceedings of the Architectural Institute of Korea, 29(1), 571-574 (in Korean, with English abstract).
Kalifa, P., Chene, G., and Galle, C. (2001), High-Temperature Behaviour of HPC with Polypropylene Fibres from Spalling to Microstructure, Cement and Concrete Research, 31, 1487-1499.
Kalifa, P., Menneteau, F. D., and Quenard, D. (2000), Spalling and Pore Pressure in HPC at High Temperatures, Cement and Concrete Research, 30, 1915-1927.
Kim, H. Y., Chae, H. S., Jeon, H. K., and Youm, K. S. (2010), Proposal for the Model and Properties of Compressive Strength at High Temperature for the High Strength Concrete Mixed with Fiber Cocktail, Proceedings of the Korea Concrete Institute, 22(1), 605-608 (in Korean, with English abstract).
Kim, H. Y., Seo, C. H., and Shin, H. J. (2005), An Experimental Study on the Mechanical Properties by Compressive Strength Areas at High Temperature, Journal of the Architectural Institute of Korea, 21(7), 55-66 (in Korean, with English abstract).
Kim, S. S., and Park, K. P. (2011), Fire Damages and Deterioration of Concrete Structures, Magazine of the Korea Concrete Institute, 23(3), 28-31 (in Korean).
Li, Z. M., Shin, Y. S., No, S. R., Cho, C. H., and Kim, J. S. (2010), A Study on Fire Resistance Properties of High Strength Concrete Mixed Fiber, Proceedings of the Architectural Institute of Korea, 30(1), 251-252 (in Korean, with English abstract).
Noumowe, A. N., Siddique, R., and Debicki, G. (2009), Permeability of High-Performance Concrete Subjected to Elevated Temperature ( $600^{\circ}C$ ), Construction and Building Materials, 23, 1855-1861.
Pei, C. C., Noh, S. K., Han, M. C., Lee, J. H., Ahn, T. S., and Han, C. G. (2007), A Fundamental Study on the Fire Resistance Performance of Tunnel Concrete Depending on with Various Fiber Types and Adding Ratios, Proceedings of the Korea Concrete Institute, 19(1), 895-898 (in Korean, with English abstract).
Pei, C. C., Yoo, S. Y., Jee, S. W., Hann, C. P., Yang, S. H., and Han, C. G. (2006), Spalling Resistance of 60MPa High Strength Concrete, Proceedings of the Architectural Institute of Korea, 26(1), 361-364 (in Korean, with English abstract).
Phan, L. T., and Carino, N. J. (2002), Effects of Test Conditions and Mixture Proportions on Behavior of High-Strength Concrete Exposed to High Temperatures, ACI Materials Journal, 99(5), 54-66.
Xiao, J., and Falkner, H. (2006), On Residual Strength of High-Performance Concrete with and without Polypropylene Fibres at Elevated Temperatures, Fire Safety Journal, 41, 115-121.
Yang, H., Lin, Y., Hsiao, C., and Liu, J. Y. (2009), Evaluating Residual Compressive Strength of Concrete at Elevated Temperatures Using Ultrasonic Pulse Velocity, Fire Safety Journal, 44, 121-130.
You, J. Y., and Han, C. G. (2008), The Influence of Polymer Contents and Appearance on Spalling Prevention of High Strength Concrete, The 4th Collection of Excellent Graduation Paper of the Architectural Institute of Korea, 4(1), 55-58 (in Korean, with English abstract).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.