최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Elastomers and composites = 엘라스토머 및 콤포지트, v.49 no.2, 2014년, pp.103 - 109
Blends of emulsion SBR (E-SBR) and solution SBR (S-SBR) were prepared, and their microstructures (styrene, 1,2-unit, cis-1,4-unit, and trans-1,4-unit contents) were analyzed by Fourier transform infrared spectroscopy (FTIR) with transmittance mode. Method to measure absorbance by valley-to-valley ba...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
SBR은 무엇으로 구성되어 있는가? | 스티렌-부타디엔 고무(styrene-butadiene rubber, SBR)는 스티렌과 부타디엔의 공중합체이다. SBR은 styrene, 1,2-unit, cis-1, 4-unit, 그리고 trans-1,4-unit로 구성되어 있다. 4가지 미세구조의 함량비는 SBR의 특징을 결정 짓는다. | |
SBR과 부타디엔 고무(BR)의 미세구조 분석에 사용되는 방법에는 어떤 것이 있는가? | 4가지 미세구조의 함량비는 SBR의 특징을 결정 짓는다. SBR과 부타디엔 고무(BR)의 미세구조 분석에는 적외선 분광법(infrared spectro-scopy, IR),1-5 라만분광법(Raman spectroscopy),6-8 핵자기공명분광법(nuclear magnetic resonance spectroscopy, NMR)9-11 등이 널리 사용되고 있다. | |
SBR 혼합물 준비 시, 원재료에 잔류하는 유기물을 먼저 제거하는 이유는? | 본 연구에서는 미세구조가 다른 원재료 E-SBR과 S-SBR의 혼합비를 달리하여 SBR 혼합물을 준비하였다. 원재료에 잔류하는 유기물은 IR 분석에 영향을 주기 때문에, 먼저 원재료에 잔류하는 유기물을 제거한 후 2가지 SBR을 용매에 녹여 완전히 혼합하여 제조하였다. IR 분석용 KBr window에 시료를 코팅하여 투과 방식(transmittance mode)으로 분석하였다. |
R. S. Silas, J. Yates, and V. Thorton, "Determination of unsaturation distribution in polybutadienes by infrared spectrometry", Anal. Chem., 31, 529 (1959).
D. L. Snavely, and C. Angevine, "Near-IR spectrum of polybutadiene", J. Polym. Sci. A: Polym. Chem., 34, 1669 (1996).
R. G. J. Miller and H. A. Willis, "Laboratory methods in vibrational spectroscopy", J. Appl. Chem., 6, 385 (1956).
J. L. Binder, "Infrared spectra of polybutadienes", J. Polym. Sci. A, 3, 1597 (1965).
J. Guilment and L. Bokobza, "Determination of polybutadiene microstructures and styrene-butadiene copolymers composition by vibrational techniquegs combined with chemometric treatment", Vib. Spectrosc., 26, 133 (2001).
S. W. Cornell and J. L. Koenig, "The Raman spectra of polybutadiene rubbers", Macromolecules, 2, 540 (1969).
H. J. Sloane and R. Bramston-Cook, "Raman spectroscopy of some polymers and copolymers of styrene, butadiene, and methylmethacrylate", Appl. Spectrosc., 27, 217 (1973).
S. Poshyachinda, H. G. M. Edwards, and A. F. Johnson, "Critical assessment of vibrational and NMR spectroscopic techniques for the microstructure determination of polybutadienes", Polymer, 32, 338 (1991).
H. J. Harwood, "Characterization of the structures of diene polymers by NMR", Rubber Chem. Technol., 55, 769 (1982).
G. Van der Velden, C. Didden, T. Veermans, and J. Beulen, "A new method for the microstructure determination of polybutadiene with cis-1, 4, trans-1, 4, and vinyl-1, 2 units by carbon-13 NMR", Macromolecules, 20, 1252 (1987).
G. P. M. Van der Velden and L. J. Fetters, "Microstructure determination of nondeuterated, partially deuterated, and perdeuterated polybutadienes with cis-1, 4, trans-1, 4, and vinyl- 1, 2 units by carbon-13 NMR", Macromolecules, 23, 2470 (1990).
R. R. Hampton, "Infrared analysis of low temperature polymers", Anal. Chem., 21, 923 (1949).
J. E. Bertie, C. D. Keefe and R. N. Jones, "Infrared intensities of liquids VIII. Accurate baseline correction of transmission spectra of liquids for computation of absolute intensities, and the 1036 cm-' band of benzene as a potential intensity standard", Can. J. Chem., 69, 1609 (1991).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.