최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.38 no.7 = no.346, 2014년, pp.619 - 624
The critical heat flux (CHF) on a heat transfer surface with nanostructures is known to be significantly better than that on flat surfaces. Several physical mechanisms have been proposed to explain this phenomenon. However, almost all studies conducted so far have been qualitative, and a generalized...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
임계 열유속은 어디에서 나타나는가? | 그러므로 임계열유속 값의 정확한 예측 및 나아가 그 값의 증진은 고효율 비등 시스템의 개발에 본질적인 요소라고 할 수 있다. 임계 열유속은 기본적으로 핵비등 영역에서 막비등 영역으로 천이되는 지점에서 나타난다. 액체에서 증기로의 상변화를 통해 열을 전달하던 열원 표면이 증기로 덮이게 되면 증기의 상대적으로 낮은 열전달 능력으로 인해 열원 표면에서 10 K 에서 100 K 오더의 급격한 온도상승이 수반된다. | |
최초로 제안된 임계 열유속에 대한 증기 반발력 메커니즘은 무엇인가? | 사실, 임계 열유속에 대한 증기 반발력 메커니즘은 Nikolayev 등(8,9)에 의해 최초로 제안되었다. 그들은 액체-증기 계면에서 증발하는 유체 분자들이 계면에 반동력을 유발한다고 제안하였다. 또한 이러한 힘이 로켓 엔진에서 가스가 방출될 때 발생 하는 반동력과 유사한 힘이라고 설명하였다. | |
번아웃(Burn-out) 현상이란 무엇인가? | 임계 열유속은 기본적으로 핵비등 영역에서 막비등 영역으로 천이되는 지점에서 나타난다. 액체에서 증기로의 상변화를 통해 열을 전달하던 열원 표면이 증기로 덮이게 되면 증기의 상대적으로 낮은 열전달 능력으로 인해 열원 표면에서 10 K 에서 100 K 오더의 급격한 온도상승이 수반된다. 이것이 번아웃(Burn-out) 현상이다(Fig. |
Zuber, N., 1959, "Hydrodynamic Aspects of Boiling Heat Transfer," AECU-4439, Physics and Mathematics, US Atomic Energy Commission.
Liter, S.G. and Kaviany, M., 2001, "Pool-boiling CHF Enhancement by Modulated Porous-Layer Coating: Theory and Experiment," Int. J. Heat Mass Transfer, 44, pp. 4287-4311.
Liaw, S. P. and Dhir, V. K., 1986, "Effect of Surface Wettability on Transition Boiling Heat Transfer from a Vertical Surface," ASME J. Heat Transfer, Proceedings of the 8th International Heat Transfer Conference, San Francisco, CA., Vol. 4, pp. 2013-2036.
Ramilison, J.M., Sadasivan, P. and Lienhard, J.H., 1992, "Surface Factors Influencing Burnout on Flat Heaters," ASME J. Heat Transfer, 114, pp. 287-290.
Kandlikar, S.G., 2001, "A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and Orientation," ASME J. Heat Transfer, 114, pp. 1071-1079.
Theofanous, T. G., Dinh, T. N., Tu, J. P. and Dinh, A. T., 2002, "The Boiling Crisis Phenomenon: Part II: Dryout Dynamics and Burnout," Exp. Thermal and Fluid Sci., 26, 793-810.
Tanaka, Y., Hidaka, S., Cao, J. M., Nakamura, T., Yamamoto, H., Masuda, M. and Ito, T., 2005, "Effect of Surface Wettability on Boiling and Evaporation," Energy, 30, pp. 209-220.
Nikolayev, V. S. and Beysens, D. A., 1999, "Boiling Crisis and Non-Equilibrium Drying Transition," Europhys. Lett., 47, pp. 345-351.
Nikolayev, V. S., Chatain, D., Garrabos, Y. and Beysens, D., 2006, "Experimental Evidence of the Vapor Recoil Mechanism in the Boiling Crisis," Phys. Rev. Lett., 97, 184503.
Kim H. D. and Kim, M. H., 2007, "Effect of Nanoparticle Deposition on Capillary Wicking that Influences the Critical Heat Flux in Nanofluids," Appl. Phys. Lett., 91, 014104.
Park, S. D., Lee, S. W., Kang, S., Bang, I. C., Kim, J. H., Shin, H. S., Lee, D. W. and Lee, D. W., 2010, "Effects of Nanofluids Containing Graphene/Graphene-Oxide Nanosheets on Critical Heat Flux," Appl. Phys. Lett., 97, 023103.
Kim, S. J., Bang, I. C., Buongiorno, J. and Hu, L. W., 2007, "Surface Wettability Change During Boiling of Nanofluids and Its Effect on Critical Heat Flux," Int. J. Heat Mass Transfer, 50, pp. 4105-4116.
Kim, H. D., 2007, "An Experimental Study on Pool Boiling CHF Enhancement Using Nanofluids," Ph. D. Thesis, POSTECH, Korea.
Moon, I.K., Lee, J. H., Ruoff, R. S. and Lee, H. Y., 2010, "Reduced Graphene Oxide by Chemical Graphitization," Nat. Commun., 1, 73, doi:10.1038/ncomms1067.
Kim, S., Kim, H. D., Kim, H., Ahn, H. S., Jo, H., Kim, J. and Kim, M. H., 2010, "Effects of Nano-Fluid and Surfaces with Nano Structure on the Increase of CHF," Exp. Thermal and Fluid Sci., 34, pp. 487-495.
Kim, S., Kim, H. D., Kim, H., Ahn, H. S., Jo, H., Kim, J. and Kim, M. H., 2010, "Effects of Nano-Fluid and Surfaces with Nano Structure on the Increase of CHF," Exp. Thermal and Fluid Sci., 34, pp. 487-495.
Wu, W., Bostanci, H., Chow, L. C., Hong, Y., Su, M. and Kizito, J. P., 2010, "Nucleate Boiling Heat Transfer Enhancement for Water and FC-72 on Titanium Oxide and Silicon Oxide Surfaces," Int. J. Heat Mass Transfer, 53, pp. 1773-1777.
Li, C., Wang, Z., Wang, P., Peles, Y., Koratkar, N. and Peterson, G. P., 2008, "Nanostructured Copper Interfaces for Enhanced Boiling," Small, 4, pp. 1084-1088.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.