최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.15 no.6, 2014년, pp.4007 - 4012
This study examined the fabrication and thermal properties of fumed silica/ceramic wool inorganic composites. A predetermined quantity of fumed silica and ceramic wool was mixed uniformly into a slurry state and stabilized in the mold at room temperature, and converted to a massive foamed body throu...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Ceramic Wool은 어떤 재료인가? | 한편, 무기재료를 단열재로 사용하고자 할 때의 최대 문제점은 재료의 유연성과 시공 시의 분진 발생 및 경제성이 된다. Ceramic Wool은 천연 암석에 석회석을 첨가하여 전기로에서 요해하고 이것을 공기 또는 수증기를 불어 넣어 만드는 섬유상의 무기재료로서, 비중이 0.02 ~ 0. | |
Fumed Silica은 어떤 과정에 의하여 만들어지는가? | oK으로서 가격이 상대적으로 싸고 단열성이 우수하며, 화재 발생 시에도 유해가스가 발생하지 않는 점 등으로 인하여 주택이나 산업용 플랜트, 및 설비 배관 등에 널리 사용되고 있다[4]. 또한, Fumed Silica와 같은 분말형 무기단열재는 사염화규소(SiCl4)를 precursor로 하여 수소와 산소로 태우며 화염수화(flame hydrolysis)시키는 과정에서 만들어지며 조건에 따라 비표면적 200-220 m2/g 밀도 0.16-0. | |
Fumed Silica/Ceramic Wool에 PVA 수용성 계면접착제를 사용하면 어떤 영향을 미치는가? | 3) 3 wt%의 PVA 수용성 계면접착제를 사용함으로서 복합재의 기계적 특성은 훨씬 향상시키고, 벌크밀도와 k-factor 값은 오히려 크게 감소시킬 수 있음을 알게 되었다. |
B. ClauB, "Fibers for Ceramic Matrix Composites", Ceramic Matrix Composites, ed. W. Krenkel, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, pp.1-20, 2008.
A. Berge and P. JohanBon, "Literature Review of High Performance Thermal Insulation", Chalmers Civil and Environmental Engineering, Report 2012:2.
X. Yibin, Yoshihisa, G. Hongbo, Y. Masayoshi, "Prediction of thermal conductivity of composite materials", Power and Energy Systems, 2, pp.1048-1059, 2008.
W. Krenkel,R. Naslain, and H. Schneider, High Temperature CeramicMatrix Composites, Wiley - VCH Verlag GmbH,Weinheim, 2001.
B. ClauB and D. Schawaller, "Modern Aspects of Ceramic Fiber Development", Advances in Science and Technology, 50, pp. 1-8, 2006. DOI: http://dx.doi.org/10.4028/www.scientific.net/AST.50.1
M. A. Kumar, G. R. Reddy, V. P.Chandrakar, "Hydrophilic fumed silica/clay nanocomposites: Effect of silica/clay on performance", International Journal of Nanomaterials and Biostructures, 1(1), pp. 1-11, 2011. DOI: http://dx.doi.org/10.1155/2011/189731
Y. Zheng, Y. Zheng, R. Ning, "Effects of nanoparticle SiO2 on the performance of nanocomposites, Mater. Lett., 57, pp. 2940-2944, 2003. DOI: http://dx.doi.org/10.1016/S0167-577X(02)01401-5
M. H. G. Wichmann, M. Cascione, B. Fiedler, M. Quaresimin, K. Schulte, "Influence of Surface treatment on mechanical behaviour of fumed silica/epoxy nanocomposites", Comp. Interf., 13, pp. 699-715, 2006. DOI: http://dx.doi.org/10.1163/156855406779366723
M. A. Kumar, K. H. Reddy, Y. V. M. Reddy, G. R. Reddy, N. S. V. Kumar, and B. H. N. Reddy, "ABeBment of nanoclay filled epoxy on mechanical, thermal and chemical resistance properties of nanocomposites", J. Metal. Mater. Sci., 52, pp. 305-315, 2010.
C.-T. Lee, M. Jang, and T-M. Park, "A Foamed Body through the Complexation with the Sepiolite and Expanded Pearlite", Appl. Chem. Eng., 23(1), pp. 77-85, 2012.
Morgan ThermalCeramics, www.morganthermalceramics.com
DeguBa, Technical information, No.1271
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.