최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.18 no.4, 2014년, pp.92 - 98
권성준 (한남대학교 건설시스템공학과) , 조홍준 ((주)천지건업) , 박상순 (상명대학교 건설시스템공학과)
Spacer is a construction material for maintaining cover depth and steel installation, however several problems like staining, leakage, and cracking are currently issued due to performance degradation and unsatisfactory dimensional stability of spacer. Plastic composite is widely used for prevention ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
간격재란 무엇인가? | 철근의 위치를 바르게 유지하고 피복두께를 확보하기 위해 사용되는 가장 효율적인 방법이 간격재 (Spacer)의 시공이다. 간격재는는 철근과 거푸집 또는 철근과 철근의 간격을 유지하기 위하여 사용하는 것으로 1990년대는 플라스틱 간격재가, 그 이후로는 시멘트 모르타르 간격재가 많이 사용되었다. 플라스틱 간격재는 마찰력 부족으로 철근과 거푸집사이에서 뒤틀림을 유발시키거나 콘크리트 타설 또는 작업자들의 철근배근 및 조립 작업 중 충격으로 인해 탈착되는 현상이 많은 단점을 지니고 있다. | |
플라스틱 간격재의 단점은 무엇인가? | 간격재는는 철근과 거푸집 또는 철근과 철근의 간격을 유지하기 위하여 사용하는 것으로 1990년대는 플라스틱 간격재가, 그 이후로는 시멘트 모르타르 간격재가 많이 사용되었다. 플라스틱 간격재는 마찰력 부족으로 철근과 거푸집사이에서 뒤틀림을 유발시키거나 콘크리트 타설 또는 작업자들의 철근배근 및 조립 작업 중 충격으로 인해 탈착되는 현상이 많은 단점을 지니고 있다. 또한 콘크리트와의 부착력 저하로 인한 미세균열이 발생하게 된다. | |
플라스틱 간격재의 경우 콘크리트와의 부착력 저하로 인한 미세균열이 발생하게 되는 단점이 있는데 이로 인해 어떤 문제가 발생하는가? | 또한 콘크리트와의 부착력 저하로 인한 미세균열이 발생하게 된다. 이는 수분 및 각종 열화인자의 유입통로로 작용하여 콘크리트 구조물의 내구성을 떨어뜨리는 요인이 된다 (Kim et al., 2001; Lee, 2008). |
ACI Committee 544 (1999), Design Consideration for Steel Fiber Reinforced Concrete, ACI 544.4R.
Ahn, J. K., Shim, B., Song, H. W., and Byun, K. J. (2003), A study on fracture characteristics of chemically prestressed mortar, KCI Spring Conference, 15(1), 828-832 (in Korean).
Bentz, D. P., Lura, P., and Roberts, J. W. (2005), Mixture proportioning for internal curing, Concrete International, 27(2), 35-40.
Du, L., and Folliard, K. J. (2005), Mechanisms of air entrainment in concrete", Cement and Concrete Research, 35(8), 1463-1471.
Emmons, P. H. (1994), Concrete Repair and Maintenance Illustrated, R.S. Means Company, 5-16.
JSCE-Concrete Committee (2002), Standard Spcification for Concrete Structures.
KCI (2010), Mixing and construction manual for performancebased concrete, Technical report 1-1: Concrete Korea.
Kim, J. M., Cho, S. H., and Lee, D. K. (2001), High strengthening mechanism by blast furnace slag in concrete based product, Clean Technology, 7(2), 109-117.
Li, M., and Li, V. C. (2011), High-early-strength ECC for rapid durable repair: Material properties, ACI Materials Journal, 108(1), 3-12.
Oh, B. H., Lee, M. G., Yoo, S. W., and Baik, S. H. (1996), A study on the strength and drying shrinkage crack control characteristics of polypropylene fiber reinforced concrete, Journal of KCI, 8(6), 151-165.
Park, S. S., Kwon, S. J., and Jung, S. H. (2012), Analysis technique for chloride penetration in cracked concrete using equivalent diffusion and permeation, Construction and Building Materials, 29(2), 183-192 (SCIE).
Park, S. S., Kwon, S. J., Jung, S. H., and Lee, S. W. (2012), Modeling of water permeability in early aged concrete with cracks based on micro pore structure, Construction and Building Materials, 27(1), 597-604 (SCIE).
Shah, S. P. (1992), Fiber reinforced cement composite, New York, McGraw-Hill, Inc.
Song, H. W., Kwon, S. J., Byun, K. J., and Park, C. K. (2006), Predicting carbonation in early-aged cracked concrete, Cement and Concrete Research, 36, Issue 5, 979-989.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.