최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기공업화학 = Applied chemistry for engineering, v.25 no.4, 2014년, pp.409 - 413
홍인권 (단국대학교 화학공학과) , 전길송 (단국대학교 화학공학과) , 양창배 ((주)태산파우텍) , 이승범 (단국대학교 화학공학과)
This study was carried out to design the optimum mixing ratio of aggregate, cyclic aggregate, and binder (moisture, emulsified asphalt, and emulsion type additives) and produce recycling cold asphalt paving mixture satisfying site work standard. The cyclic aggregate satisfying KS F 2572 was collecte...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
가열과정을 필요로하는 재활용 아스콘 혼합물들의 단점은 무엇인가? | 가열아스콘은 140∼150 ℃로 가열된 아스팔트에 신골재(150∼180 ℃로 가열)를 첨가하여 제조되며, 재활용 가열아스콘 혼합물은 신골재(150∼180℃로 가열)와 순환골재(120∼140 ℃로 가열)를 혼합 첨가하여 제조된다[2]. 그러나 가열과정에서 온도관리가 필요하고 기존 아스팔트의 산화노화가 진행되며 유해가스와 이산화탄소가 발생되는 단점을 가지고 있다[3-4]. 또한 가열아스콘의 경우 효율적이고 안정적으로 재활용하기 위해서는 폐아스팔트에 대한 입도와 침입도 같은 기본적인 물리적 특성 파악이 필수요건이며 물리적 특성이 유사한 폐아스팔트의 분류가 선행되어져야 한다. 그러나 현실은 여러 종류의 폐아스팔트가 물리적 특성과 재령에 관계없이 서로 섞여 있기 때문에 입도와 침입도의 구분이 어려운 상황이며 보관 시에도 서로 구분하여 보관하는 것도 거의 불가능한 실정이다. | |
재활용 아스콘 혼합물은 어떻게 구분하는가? | 재활용 아스콘 혼합물은 가열아스콘, 재활용 가열아스콘 혼합물, 재활용 상온아스콘 혼합물 등으로 구분될 수 있다. 가열아스콘은 140∼150 ℃로 가열된 아스팔트에 신골재(150∼180 ℃로 가열)를 첨가하여 제조되며, 재활용 가열아스콘 혼합물은 신골재(150∼180℃로 가열)와 순환골재(120∼140 ℃로 가열)를 혼합 첨가하여 제조된다[2]. | |
재활용 상온아스콘 혼합물의 경우, 상온 상태에서 제조됨에 따라 얻는 장점은 무엇인가? | 이러한 이유 때문에 지금까지 재활용 가열아스콘 혼합물 공법이 활성화되지 못 하였다[5]. 하지만 이에 비해 재활용 상온아스콘 혼합물의 경우 상온상태의 콜드빈을 그대로 사용함으로써 제조과정 중 온도관리가 필요 없고 산화노화가 발생하지 않는 장점을 가지고 있다. 또한 순환골재의 사용량이 재활용 가열아스콘 혼합물(30 wt% 이하)에 비해 68 wt% 이상으로 높다는 장점이 있다[6]. |
Y. J. Kim, H. D. Lee, and H. Michael, Dynamic modulus and repeated load tests of cold in-place recycling mixtures using foamed asphalt, J. Mater. Civ. Eng., 21(6), 279-285 (2009).
J. Xu, S. Huang, Y. Qin, and F. Li, The impact of cement contents on the properties of asphalt emulsion stabilized cold recycling mixtures, Int. J. Pavement Res. Technol., 4(1), 48-55 (2011).
K. E. Min and H. M. Jeong, Structures and properties of semi-blown petroleum asphalt, Appl. Chem. Eng., 22(6), 664-671 (2011).
K. H. Moon, A. C. Falchetto, M. Marasteanu, and M. Turos, Using recycled asphalt materials as an alternative material source in asphalt pavements, KSCE J. Civil Eng., 18(1), 149-159 (2014).
S. D. Capitao, L. G. Picado-Santos, and F. Martinho, Pavement engineering materials : Review on the use of warm-mix asphalt, Constr. Build. Mater., 36, 1016-1024 (2012).
F. Xiao, S. N. Amirkhanian, J. Shen, and B. Putman, Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures, Constr. Build. Mater., 23(2), 1028-1034 (2009).
S. Hesami, H. Roshani, G. H. Hamedi, and A. Azarhoosh, Evaluate the mechanism of the effect of hydrated lime on moisture damage of warm mix asphalt, Constr. Build. Mater., 47, 935-941 (2013).
M. C. Rubio, G. Martinez, L. Baena, and F. Moreno, Warm mix asphalt: an overview, J. Clean. Prod., 24, 76-84 (2012).
L. D. Poulikakos, S. dos Santos, M. Bueno, S. Kuentzel, M. Hugener, and M. N. Partl, Influence of short and long term aging on chemical, microstructural and macro-mechanical properties of recycled asphalt mixtures, Constr. Build. Mater., 51, 414-423 (2014).
L. Mo, X. Li, X. Fang, M. Huurman, and S. Wu, Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives, Constr. Build. Mater., 37, 239-247 (2012).
B. Sengoz and J. Oylumluoglu, Utilization of recycled asphalt concrete with different warm mix asphalt additives prepared with different penetration grades bitumen, Constr. Build. Mater., 45, 173-183 (2013).
D. A. Marisa, C. G. Joao, and M. de L. Antunes, Mix design considerations for warm mix recycled asphalt with bitumen emulsion, Constr. Build. Mater., 28(1), 687-693 (2012).
A. E. Abu El-Maaty Behiry, Laboratory evaluation of resistance to moisture damage in asphalt mixtures, Ain Shams Eng. J., 4(3), 351-363 (2013).
X. Yu, Y. Wang, and Y. Luo, Impacts of water content on rheological properties and performance-related behaviors of foamed warm-mix asphalt, Constr. Build. Mater., 48, 203-209 (2013).
Y. H. Hong and Y. J. Kwon, Recycling of schingle waste for pavement asphalt concrete, Appl. Chem. Eng., 17(6), 614-618 (2006).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.