최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기윤활학회지 = Journal of the Korean Society of Tribologists and Lubrication Engineers, v.30 no.3, 2014년, pp.131 - 138
박문성 (국민대학교 대학원 기계설계학과) , 이종성 (국민대학교 대학원 기계설계학과) , 김태호 (국민대학교 기계시스템공학부)
This study investigates the effects of the slopes of the rotational axis and bearing preloads on the natural frequencies and onset speeds of the instability of a rotor supported on gas foil bearings (GFBs). The predictive model for the rotating system consists of a rigid rotor supported on two gas f...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
불안정성 발생 속도(onset speed of instability, OSI)는 무엇을 정의하는가? | 이는 실제 구동에서 큰 진폭을 갖는 비동기 진동 성분(subsynchronous)으로 나타난다[8]. 감쇠비가음의 값을 갖는 지점은 불안정성 발생 속도(onset speed of instability, OSI)로 정의된다. | |
가스 포일 베어링(gas foil bearing) 구조가 회전체-베어링 시스템의 안정성을 향상시키는 방법은 무엇인가? | 이러한 구조는 넓은 범위의 최소유막두께를 형성하여 베어링의 하중지지능력(load capacity)을 향상시킨다[1]. 또한 탄성 구조체간의 상호 작용을 통하여 발생하는 마찰력으로 인한 강성(stiffness) 증가와 마찰 감쇠(coulomb damping)를 생성하여 회전체-베어링 시스템의 안정성을 향상시킨다[2]. | |
가스 포일 베어링(gas foil bearing)은 무엇으로 구성되는가? | 가스 포일 베어링(gas foil bearing)은 베어링 하우징 (bearing housing) 내면에 탑 포일(top foil)과 그 아래 위치한 범프 포일(bump foil)의 탄성 구조체(elastic foil structure)로 구성된다. 이러한 구조는 넓은 범위의 최소유막두께를 형성하여 베어링의 하중지지능력(load capacity)을 향상시킨다[1]. |
Agrawal, G. L., "Foil Air/Gas Bearing Technology: An Overview", ASME paper No. 97-GT-347, 1997.
Heshmat, H., Walowit, J. A. and Pinkus, O., "Analysis of Gas-Lubricated Foil Journal Bearings", ASME J. Lubr. Technol., Vol. 105, No. 4, pp. 647-655, 1983.
Peng, J.-P. and Carpino, M., "Calculation of Stiffness and Damping Coefficients for Elastically Supported Gas Foil Bearings", ASME J. Tribol., Vol. 115, No. 1, pp. 20-27, 1993.
Heshmat, H., "Advancements in the Performance of Aerodynamic Foil Journal Bearings: High Speed and Load Capability", ASME J. Tribol., Vol. 116, No. 2, pp. 287-295, 1994.
Dellacorte, C., Fellenstein, J. A. and Benoy, P. A., "Evaluation of Advanced Solid Lubricant Coatings for Foil Air Bearings Operating at $25^{\circ}$ and $500^{\circ}C$ ", NASA/TM-1998-208660, 1998.
Bruckner, R. J. and Puleo, B. J., "Compliant Foil Journal Bearing Performance at Alternate Pressures and Temperatures", ASME Paper No. GT2008-50174, 2008.
Heshmat, H., Shapiro, W., and Gray, S., "Development of Foil Journal Bearings for High Load Capacity and High Speed Whirl Stability", ASME J. Lubr. Technol., Vol. 104, No. 2, pp. 149-156, 1982.
Kim, T. H. and San Andres, L., "Effects of a Mechanical Preload on the Dynamic Force Response of Gas Foil Bearings: Measurements and Model Predictions", STLE Tribol. Trans., Vol. 52, No. 4, pp. 569-580, 2009.
Koo, B. J., Sim, K. H. and Kim, T. H., "Rotordynamic Performance of a Rotor Supported on 3 Pad Gas Foil Bearings: Effect of Bearing Geometry", KSTLE Spring Conference, 2013.
Radil, K., Howard, S., and Dykas, B., "The Role of Radial Clearance on the Performance of Foil Air Bearings," STLE Tribol. Trans., Vol. 45, No. 4, pp. 485-490, 2002.
Kim, T. H., San Andres, L., Nourse J., Wade, J. L. and Lubell, D. R., "Modeling of a Gas Foil Bearing for Microturbine Applications: Predictions versus Experimental Stiffness and Damping Force Coefficients", World Tribology Congress, Kyoto, Japan, Sept. 2009.
Walton, J. F. and Heshmat, H., "Application of Foil Bearings to Turbomachinery Including Vertical Operation", ASME J. Eng. Gas Turbine Power, Vol. 124, No. 4, pp. 1032-1041, 2002.
Sim, K. H., Koo, B. J., Lee, J. S. and Kim, T. H., "Effects of Mechanical Preloads on the Rotordynamic Performance of a Rotor Supported on 3 Pad Gas Foil Journal Bearings", AMSE Paper No. GT2014-25849, 2014.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.