최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.27 no.4, 2014년, pp.141 - 145
박승복 (Dept. of Mechatronics Engineering, and LANL-CBNU Engineering Institute Korea, Chonbuk National University) , 한대현 (Dept. of Mechatronics Engineering, and LANL-CBNU Engineering Institute Korea, Chonbuk National University) , 강래형 (Dept. of Mechatronics Engineering, and LANL-CBNU Engineering Institute Korea, Chonbuk National University)
This paper presents a structural health monitoring method using piezoelectric paint sensor designed for an impact sensor. The piezoelectric paint sensor can be flexibly deposited onto most structural surfaces in a thin form of the paint, and measure impact signals without any external device such as...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
압전 페인트는 어디에서 활용되는가? | 압전 물질은 압전 특성을 보유한 물질로써 그 특성을 활용하여 구조물에 작용하는 충격이나 진동, 건전성 모니터링 등에 활용[7,8] 가능한 센서이다. 특 히, 압전 페인트의 경우 페인트 형태로 구조물에 적용되기 때문에 대형 선박이나 항공체, 교량 등의 거대한 구조물은 물론 그 형태에 크게 영향을 받지 않고 그 활용 위가 방대하다. 하지만 현재까지 압전 재료로써 연구되어온 압전 세라믹이나 PVDF[9-12]와는 달리 압전 페인트의 제조 방법 에 대한 표준화가 정립되어 있지 않고, 압전 페인트의 무게 비가 높으며[13] 그 특성에 대한 연구도 많이 부족한 실정이다. | |
압전 물질은 무엇인가? | 본 연구에서는 압전 페인트를 활용한 구조물에 발생하는 외력들을 실시간 모니터링 하고 그 충격의 위치를 예측하는 연구를 하고자 한다. 압전 물질은 압전 특성을 보유한 물질로써 그 특성을 활용하여 구조물에 작용하는 충격이나 진동, 건전성 모니터링 등에 활용[7,8] 가능한 센서이다. 특 히, 압전 페인트의 경우 페인트 형태로 구조물에 적용되기 때문에 대형 선박이나 항공체, 교량 등의 거대한 구조물은 물론 그 형태에 크게 영향을 받지 않고 그 활용 위가 방대하다. | |
분극 시 압전 페인트 내부의 기공을 없애는 이유는? | 이러한 에폭시와 혼합하여 사용하는 압전 페인트는 에폭시 수지 내에 압전 파우더들이 널리 분포되며 압전 세라믹과는 달리 분극에 어려움이 많다. 특히, 분극 시 압전 페인트의 불규칙한 코팅이나 내부의 미세 기공 등이 존재하면 상하부의 전극이 도전되어 타버리는 문제가 발생한다. 때문에 최대한 분극 과정에서의 문제점을 줄이기 위해 페인트 내부의 기공을 없애는 작업을 하였다. |
Richard, H.A., Fulland, M., Sander, M., and Kullmer, G., "Examples of Fatigue Crack Growth in Real Structures", 2013, In CP2006.
Cho, B.H., Lee, D.Y., and Kim, H.J. ,"Policy for Safety of Non-buildings and Non-structural Elements Against Natural Hazards in Korea." Journal of the Earthquake Engineering Society of korea, Vol. 17, No. 5, 2013 , pp. 119-128.
Yoon, D.J., "Development of Self-Sensing Sensors for Smart Structures," Journal of the Korean Society for Composite Materials, Vol. 2003, No. 1, 2003, pp. 3-19.
Taha, M.R., Noureldin, A., Lucero, J.L., and Baca, T. J., "Wavelet Transform for Structural Health Monitoring: A Compendium of Uses and Features," Structural Health Monitoring, Vol. 5, No. 3, 2006, pp. 267-295.
Ihn, J.B. and Chang, F.K.,"Pitch-catch Active Sensing Methods in Structural Health Monitoring for Aircraft Structures," Structural Health Monitoring, Vol. 7, No. 1, 2008, pp. 5-19.
Kang, I., Schulz, M.J., Kim, J.H., Shanov, V., and Shi, D., "A Carbon Nanotube Strain Sensor for Structural Health Monitoring., Smart materials and structures, Vol. 15, No. 3, 2006, pp. 737.
Gul, M., and Catbas, F.N., "Structural Health Monitoring and Damage Assessment Using a Novel Time Series Analysis Methodology with Sensor Clustering," Journal of Sound and Vibration, Vol. 330, No. 6, 2011, pp. 1196-1210.
Levassort, F., Tran-Huu-Hue, P., Ringaard, E.. and Lethiecq, M., "High-frequency and High-temperature Electromechanical Performances of New PZT-PNN Piezoceramics," Journal of the European Ceramic Society, Vol. 21, No. 10, 2001, pp. 1361-1365.
Lin, X., and Yuan, F.G., "Experimental Study Applying a Migration Technique in Structural Health Monitoring," Structural Health Monitoring, Vol. 4, No. 4, 2005, pp. 341-353.
Ueberschlag, P., "PVDF Piezoelectric Polymer," Sensor Review, Vol. 21, No. 2, 2001, pp. 118-126.
Luo, H., and Hanagud, S., "PVDF Film Sensor and Its Applications in Damage Detection," Journal of Aerospace Engineering, Vol. 12, No. 1, 1999 pp. 23-30.
Kim, J.W., and Kim, I.G., "Detection of High-Velocity Impact Damage in Composite Laminates Using PVDF Senson Signals," Journal of the Korean Society for Composite Materials, Vol. 18, No. 6, 2005, pp. 26-33.
Payo, I., and Hale, J.M., "Sensitivity Analysis of Piezoelectric Paint Sensors Made Up of PZT Ceramic Powder and Water-based Acrylic Polymer," Sensors and Actuators A: Physical, Vol. 168, No. 1, 2011, pp. 77-89.
Zhang, Y., "Piezoelectric Paint Sensor for Nondestructive Structural Condition Monitoring," Proc. SEM X International Congress and Exposition on Experimental and Applied Mechanics, 2004, pp. 7-10.
Zhang, Y., "In situ Fatigue Crack Detection Using Piezoelectric Paint Sensor," Journal of Intelligent Material Systems and Structures, Vol. 17, No. 10, 2006, pp. 843-852.
Shiratsuyu, K., Hayashi, K., Ando, A., and Sakabe, Y., "Piezoelectric Characterization of Low-Temperature-Fired Pb (Zr, Ti) $O_3-Pb$ (Ni, Nb) $O_3$ Ceramics," Japanese Journal of Applied Physics, Vol. 39, No. 9S, 2000, pp. 5609-5612.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.