최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Elastomers and composites = 엘라스토머 및 콤포지트, v.49 no.3, 2014년, pp.239 - 244
Reaction between silica and silane coupling agent without solvent was investigated using transmission mode Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). Bis[3-(triethoxysilylpropyl) tetrasulfide] (TESPT) was used as a silane coupling agent. After removing the u...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
커플링제란 무엇인가? | 1,4-6 용액중합 SBR (solution SBR)이나 실란커플링제를 사용하면 고무 매트릭스 내에서 실리카와 고무의 친화력을 높일 수 있고 실리카의 분산성도 향상시킬 수 있다. 커플링제는 2개 이상의 기능기를 가지고 있는 분자로서, 메톡 시(methoxy)나 에톡시(ethoxy)와 같은 알콕시기(alkoxy)와 유기 관능기로 이루어져 있다. 알콕시기는 실리카의 실란올기와 만나 실록산 결합(siloxane linkage)를 형성하여 실리카와 결합하고, 유기 관능기는 비극성 고분자 사슬과 상호작용한다. | |
실리카 배합물이 카본블랙의 대체물로 많이 사용하는 이유는? | 고무를 포함한 고분자 산업에서 실리카는 고분자 복합 소재의 물성과 기계적 성질을 향상시키는 무기 충진제로 많이 이용되고 있다. 실리카 배합물은 카본블랙 배합물보다 높은 젖은 노면 저항성과 낮은 구름 저항성을 가지기 때문에 타이어 산업에서는 실리카를 카본블랙의 대체물로 많이 사용하고 있다.1-3 | |
온도에 따른 실리카와 커플링제 사이의 상호작용은 어떤 반응이 일어나는가? | 실리카와 커플링제 사이의 상호작용은 온도나 반응 조건에 따라 물리적 흡착이나 수소결합이 형성되는 등 다양하게 나타난다. 낮은 온도에서는 실란커플링제의 에톡시기와 실리카 표면의 실란올기 사이의 수소결합으로 인하여 실리카 표면에 커플링제가 흡착하게 된다.8 높은 온도(100 – 200oC)에서는 축합반응이 일어나 에탄올이 빠져 나오고, 커플링제와 실리카 사이에 실록산 결합이 형성되어 결합한다.8-11 수분이 있는 조건에서는 먼저 실란커플링제의 에톡시기가 가수분해되어 실란올기로 바뀌고, 실리카 표면의 실란올기와 축합반응하여 실록산 결합을 형성한다. |
K. W. Lim, S. C. Ji, and K. Y. Jung, "Advanced synthetic technology for high performance energy tire tread rubber", Elast. Compos., 44, 232 (2009).
K. W. Stockelhuber, A. S. Svistkov, A. G. Pelevin, and G. Heinrich, "Impact of filler surface modification on large scale mechanics of styrene butadiene/silica rubber composites", Macromolecules, 44, 4366 (2011).
N. Suzukia, M. Itoa, and F. Yatsuyanagi, "Effects of rubber/filler interactions on deformation behavior of silica filled SBR systems", Polymer, 46, 193 (2005).
J. G. Meier, J. Fritzsche, L. Guy, Y. Bomal, and M. Kluppel, "Relaxation dynamics of hydration water at activated silica interfaces in high-per'' formance elastomer composites", Macromolecules, 42, 2127 (2009).
Y. Li, M. J. Wang, T. Zhang, F. Zhang, and X. Fu, "Study of dispersion morphology of silica in rubber", Rubber Chem. Technol., 67, 693 (1994).
S. Wolff and M. J. Wang, "Filler-elastomer interaction. Part IV. The effect of the surface energies of fillers on elastomer reinforcement", Rubber Chem. Technol., 65, 329 (1992).
S. Wolff, U. Gorl, M. J. Wang, and W. Wolff, "Silane modified silicas", Eur. Rubber J., 16, 16 (1994).
W. Hertl, "Mechanism of gaseous siloxane reaction with silica", J. Phys. Chem., 72, 1248 (1968).
L. L. Tedder, L. Guangquan, and J. E. Crowell, "Mechanistic studies of dielectric thin film growth by low pressure chemical vapor deposition: The reaction of tetraethoxysilane with $SiO_2$ surfaces", J. Appl. Phys., 69, 7037 (1991).
D. W. Sindorf and G. E. Maciel, "Solid-state NMR studies of the reactions of silica surfaces with polyfunctional chloromethylsilanes and ethoxy methylsilanes", J. Am. Chem. Soc, 105, 3767 (1983).
Y. Matsumura, K. Hashimoto, and S. Yoshida, "Quantum chemical interpretation of the mechanism of ethanol dehydrogenation driven by active oxygen bridges in silicate-1 and silica", J. Mol. Catal., 68, 73 (1991).
U. Goerl, A. Hunsche, A. Mueller, and H. G. Koban, "Investigations into the silica/silane reaction system", Rubber Chem. Technol., 70, 608 (1997).
F. Vilmin, "Reactivity of bis[3-(triethoxysilyl)propyl] tetrasulfide (TESPT) silane coupling agent over hydrated silica: Operando IR spectroscopy and chemometrics study", J. Phys. Chem. C, 118, 4056 (2014).
J. D. Le Grange, J. L. Markham, and C. R. Kurkjian, "Effects of surface hydration on the deposition of silane monolayers on silica", Langmuir, 9, 1749 (1993).
P. Silberzan, L. Leger, D. Ausserre, and J. J.Benattar, "Silanation of silica surfaces. A new method of constructing pure or mixed monolayers", Langmuir, 7, 1647 (1991).
W. Yoshida, R. P. Castro, J. D. Jou, and Y. Cohen, "Multilayer alkoxysilane silylation of oxide surfaces", Langmuir, 17, 5882 (2001).
K. C. Vrancken, P. Van Der Voort, I. Gillis-D'Hamers, E. F. Vansant, and P. Grobet, "Influence of water in the reaction of [gamma]-aminopropyltriethoxysilane with silica gel. A Fourier-transform infrared and cross-polarisation magic-angle-spinning nuclear magnetic resonance study". J. Chem. Soc., Faraday Trans., 88, 3197 (1992).
Y. Li, B. Han, S. Wen, Y. Lu, H. Yang, L. Zhang, and L. Liu, "Effect of the temperature on surface modification of silica and properties of modified silica filled rubber composites", Composites: Part A, 62, 52 (2014).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.