최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기신재생에너지 = New & Renewable Energy, v.10 no.3, 2014년, pp.6 - 13
윤석 (KAIST 건설및환경공학과) , 이승래 (KAIST 건설및환경공학과)
This paper presents a computational study of thermal performance and construction cost of horizontal ground heat exchangers (GHEs). GLD (ground loop design) simulations of various type of GHEs were carried out. Construction costs were also calculated based on standard estimating, and compared with v...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
지열히트펌프 시스템은 크게 어떻게 분류할 수 있는가? | 연중 일정한 온도를 유지하는 지열히트펌프 시스템은 크게 밀폐형과 개방형으로 분류될 수 있다. 밀폐형은 가장 보편적인 시스템으로 지열을 보유하고 있는 지중에 열교환기 파이프를 설치한 후 이들 파이프 내에 순환수를 순환시켜 지중과의 열교환을 통해 지중의 열을 흡수 또는 방출하는 시스템이다. | |
수직 밀폐형은 개방형과 비교할 때 어떤 단점이 있는가? | 하지만 수직 밀폐형은 개방형과 비교하여 열전달 성능이 다소 떨어지며 초기 시공비가 비싸다는 단점이 있다. 이에 대한 대안으로 구조물의 기초를 직접 열교환기로 이용하는 에너지파일 시스템이나 수평형 혹은 개방형 등에 대한 연구가 최근들어 조금씩 진행되고 있다. | |
밀폐형은 수직형과 수평형으로 나뉘는데, 이 중 수직 밀폐형은 어떻게 설치하는가? | 이러한 밀폐형은 수직형과 수평형으로 나뉠 수 있다. 이 중 수직 밀폐형은 약 15cm 정도 직경의 보어홀을 수직으로 약 150∼200m까지 천공한 후 내부에 열교환기를 설치한다. 그 후 파이프와 보어홀 내부를 속채움재로 그라우팅하여 지반과의 열 교환이 원활하게 이루어지게 한다. 수직 밀폐형은 시공 면적이 상대적으로 적게 소요되기에 설치 면적이 제한적인 상황에서 가장 적합한 방법으로 알려져 있으며 국내에서 현재 설치되어진 지열 히트펌프 시스템의 대부분은 수직 밀폐형이라 할 수 있다. |
Jun, L., Xu, Z., Jun, G. Jie, Y., 2009, "Evaluation of heat exchange rate of GHE in goethermal heat pump systems", Renewable energy, Vol. 34, pp. 2898-2904.
Min, S., Lee, C., Park, M., Koh, H., and Choi, H., 2010, "Numerical study of heat transfer efficiency, performance and mechanical behavior induced by thermal stress of energy pile", Transaction of the Korea Society of Geothermal Energy Engineers, Vol. 6, No. 2, pp. 9-13.
Park, H. K, Lee, S. R, Yoon, S, Choi, J. C., 2013, "Evaluation of thermal response and performance of PHC energy pile: Field experiments and numerical simulation", Applied Energy, Vol. 103, pp. 12-24.
Yoon, S., Lee, S. R., Go, G. H., Jianfeng, X., Park, H., Park, D., "Thermal transfer behavior in two types of W-shaped ground heat exchangers installed in multilayer soils", Geomechanics and Engineering, Vol. 6, No. 1, pp. 79-98.
Wu, Y., Gan, G., Verhoef, A., Vidale, P.L., Gonzalez, R.G., "Experimental measurement and numerical simulation of horizontal-coupled slinky ground source heat exchangers", Applied Thermal Engineering, Vol. 30, pp. 2574-2583.
Chong, C.S.A., Gan, G., V, A., Garcia, R. G., Vidale, P. L., 2013, "Simulation of thermal performance of horizontal slinky-loop heat exchangers for ground heat pump", Applied Energy, Vol. 104, pp. 603-610.
Congedo, P.M., Colangelo, G., Starace, G., 2012, "CFD simulation of horizontal ground heat exchangers: A comparison among different configurations", Appplied Thermal Engineering, Vol. 33-34, pp. 24-32.
Gaia Geothermal. Ground Loop Design Software, GLD2012.
Remund, C.P., 1999, "Borehole thermal resistance: laboratory and field studies", ASHARE CH-99-2-1.
2014 건설공사 표준품셈-토목부분, 한국건설기술연구원.
이일현(2014), EasyFlow 회귀분석, 한나래.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.