최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.38 no.11, 2014년, pp.1273 - 1281
사민우 (안동대학교 기계공학과) , 김종영 (안동대학교 기계공학과)
Tissue engineering is an emerging research field that has the potential to restore, regenerate and repair damaged bone tissue and organs. Tricalcium phosphate and hydroxyapatite biomaterials-based calcium phosphate are excellent materials that have both osteoconduction and biocompatibility for bone ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
다공성 세라믹 인공지지체의 제작 방법은 무엇이 있는가 | 이 중 TCP 는 높은 생분해성을 가졌고, HA 는 생체 활성(Bioactivity)이 매우 우수하고 골 대체재로서 자연적인 골 기질과 화학적인 성분이 유사한 것 으로 알려져 있다. (3,4) 다공성 세라믹 인공지지체 의 제작 방법에는 염침출법(Particulate leaching), 사출성형법(Melt molding), 동결건조법(Freeze drying), 가스발포법(Gas foaming), 상 분리법 (Phase separation) 등으로 다양한 방식이 있다. (5~7) 하지만, 이러한 제작 방법은 임의적이고 복잡한 3 차원 형상으로의 인공지지체를 제작하기 어렵 고, 또한 혈관신생(Vascularization)을 위해 인공지 지체 상에 내부 경로를 만들고 공간 분포와 공 극 크기, 형상 맞춤형(Geometry)으로 정밀하게 제어하기 힘들다. | |
인공지지체는 무엇을 필요로 하는가 | 최근 조직 공학(Tissue engineering) 분야에서는 골조직 재생을 위한 3 차원 인공지지체(Threedimensional scaffold)의 제작에 관한 연구를 활발 히 수행하고 있다. 인공지지체는 생분해성 (Biodegradability), 적절한 기계적 특성(Mechanical property), 내부 연결성(Interconnectivity)이 있는 3 원 다공성 구조(Porous structure), 골전도성(Osteoconductivity) 그리고 생체적합성(Biocompatibility) 등을 필요로 한다. (1,2) 이때 골 조직 재생에 적용 할 수 있는 이상적인 재료로서 인산칼슘 계 세 라믹스(Calcium phosphate-based ceramics)인 삼인산 칼슘(Tricalcium phosphate, TCP) 및 수산화인회석 (Hydroxyapatite, HA)이 주로 이용되고 있다. | |
삼인산 칼슘의 장점은 무엇인가 | (1,2) 이때 골 조직 재생에 적용 할 수 있는 이상적인 재료로서 인산칼슘 계 세 라믹스(Calcium phosphate-based ceramics)인 삼인산 칼슘(Tricalcium phosphate, TCP) 및 수산화인회석 (Hydroxyapatite, HA)이 주로 이용되고 있다. 이 중 TCP 는 높은 생분해성을 가졌고, HA 는 생체 활성(Bioactivity)이 매우 우수하고 골 대체재로서 자연적인 골 기질과 화학적인 성분이 유사한 것 으로 알려져 있다. (3,4) 다공성 세라믹 인공지지체 의 제작 방법에는 염침출법(Particulate leaching), 사출성형법(Melt molding), 동결건조법(Freeze drying), 가스발포법(Gas foaming), 상 분리법 (Phase separation) 등으로 다양한 방식이 있다. |
Yang, S., Leong, F., Du, Z. and Chua, C. K., 2001, "The Design of Scaffolds for Use in Tissue Engineering. Part I. Traditional Factors," Tissue Eng., Vol. 7, No. 6, pp. 679-689.
Yoshikawa, H. and Myoui, A., 2005, "Bone Tissue Engineering with Porous Hydroxyapatite Ceramics," J. Artif. Organs., Vol. 8, No. 3, pp. 131-136.
Kim, K. L., Ok, K. M., Kim, D. H., Park, H. C. and Yoon, S. Y., 2013, "Fabrication and Characterization of Biphasic Calcium Phosphate Scaffolds with an Unidirectional Macropore Structure Using Tertiary Butyl Alcohol Based Freeze Gel Casting Method," J. Korean Ceram, Soc., Vol. 50, No. 4, pp. 263-268.
Hutmacher, D. W., 2000, "Scaffolds in Tissue Engineering Bone and Cartilage," Biomaterials, Vol. 21, Issue 24, pp. 2529-2543.
Zhang, X., Cao, C., Ma, X. and Li, Y., 2012, "Optimization of Macroporous 3-D Silk Fibrin Scaffolds by Salt-Leaching Procedure in Organic Solvent-Free Conditions," J. Mater. Sci: Mater. Med., Vol. 23, pp. 315-324.
Hutmacher, D. W., Sittinger, M. and Risbud, M. V., 2004, "Scaffold-Based Tissue Engineering: Rationale for Computer-Aided Design and Solid Free-Form Fabrication Systems," Trends Biomechnol., Vol. 22, Issue 7, pp. 354-362.
Bartolo, P. J. S., Almeida, H. and Laoui, T., 2009, "Rapid Prototyping and Manufacturing for Tissue Engineering Scaffolds," Int. J. Comput. Appl. Tech., Vol. 36, Issue 1, pp. 1-9.
Lee, S. J., Kang, T. Y., Park, J. K., Rhie, J. W., Hahn, S. K. and Cho, D. W., 2007, "Development of Three-Dimensional Scaffold for Cartilage Regeneration Using Microstereolithography," Proceeding of KSME, Vol. 5, pp. 188-193.
Wikipedia, "3D Printing," http://ko.wikipedia.org/wiki/3D_printing
Soon, Y. M., Shin, K. H., Koh, Y. H., Lee, J. H., Choi, W. Y. and Kim H. E., 2011, "Fabrication and Compressive Strength Hydroxyapatite Scaffolds with a Functionally Graded Core/Shell Structure," J. Eur. Ceram. Soc., Vol. 31, Issues 1-2, pp. 13-18.
Korea Communications Agency, 2013, "3D Printing Technology and Applications," Vol. 6, pp. 1-6.
Seol, Y. J., Kim, J. Y., Lee, S. J., Park, E. K., Kim, S, Y. and Cho, D. W., 2008, "Fabrication of Hydroxyapatite Scaffold Using Micro-Stereolithography and Mold Technology," Proceeding of KSME(08BE044), pp. 102-103.
Schumacher, M., Deisinger, U., Detsch, R. and Ziegler, G., 2010 "Indirect Rapid Prototyping of Biphasic Calcium Phosphate Scaffolds as Bone Substitutes: Influence of Phase Composition, Macroporosity and Pore Geometry on Mechanical Properties," J. Mater. Sci: Mater. Med., Vol. 21, No. 12, pp. 3119-3127.
Miranda, P., Saiz, E., Gryn, K. and Tomsia, A. P., 2006, "Sintering and Robocasting of Beta- Tricalcium Phosphate Scaffolds for Orthopaedic Applications," Acta Biomater., Vol. 2, No. 4, pp. 457-466.
Vivanco, J., Aiyanger, A., Araneda, A. and Ploeg, H. L., 2012, "Mechanical Characterization of Injection-Molded Macro Porous Bioceramic Bone Scaffolds," J. Mech. Behav. Biomed. Mater., Vol. 9, pp. 137-152.
Mirhadi, B., Mehdikhani, B. and Askari, N., 2011, "Synthesis of Nano-Sized $\beta$ -Tricalcium Phosphate via Wet Precipitation," Process. Appl. Ceram., Vol. 5, No. 4, pp. 193-198.
http://hydroxyapatite.wikispaces.com/
Kim, H., J., Park, I., K., Kim, J. H., Cho, C. S. and Kim, M., S., 2012, "Gas Foaming Fabrication of Porous Biphasic Calcium Phosphate for Bone Regeneration," Tissue Eng. Regen. Med., Vol. 9, No. 2, pp. 63-68.
Oh, S. H., Park, I. K., Kim, J. M. and Lee, J. H., 2007, "In Vitro and in Vivo Characteristics of PCL Scaffolds with Pore Size Gradient Fabricated by a Centrifugation Method," Biomaterials, Vol. 28, pp. 1664-1671.
Park, K. B., Park, J. W., Ahn, H. U., Yang, D. J., Choi, S. K., Jang. I. S., Yeo, S. I. and Seo, J. Y., 2006, "Comparative Study on the Physicochemical Properties and Cytocompatibility of Microporous Biphasic Calcium Phosphate Ceramics as a Bone Graft Substitute," J. Korean Acad. Periodontol., Vol. 36, pp. 797-808.
Tripathi, G. and Basu, B, 2012, "A Porous Hydroxyapatite Scaffold for Bone Tissue Engineering Physic-Mechanical and Biological Evaluations," Ceram. Inter., Vol. 38, pp. 341-349.
Vorndran, E., Klarner, M., Klammert, U., Grover, L. M., Patel, S., Barralet, J. E. and Gbureck, U., 2008, "3D Powder Printing of $\beta$ -Tricalcium Phosphate Ceramics Using Different Strategies," Adv. Eng. Mater., Vol. 10, pp. 67-71.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.