$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

방향족 화합물 화염의 축소 반응 메카니즘 개발 : 벤젠
A Short Kinetic Mechanism for Premixed Flames of Aromatic Compound : Benzene 원문보기

한국연소학회지 = Journal of the Korean Society of Combustion, v.20 no.4, 2015년, pp.49 - 55  

이기용 (안동대학교 기계공학과)

Abstract AI-Helper 아이콘AI-Helper

A short kinetic mechanism for premixed benzene/air flames was developed with a reduction method of Simulation Error Minimization Connectivity Method(SEM-CM). It consisted of 38 species and 336 elementary reactions. Flame speeds were calculated and compared with those from full mechanisms and experim...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

문제 정의

  • 본 연구에서는 벤젠/공기에 대한 축소 반응 메카니즘을 개발하여 수치해석을 수행하였다. 1기압 보다는 고압조건의 적용에 가능한 반응 메카니즘을 제시하였다.
본문요약 정보가 도움이 되었나요?

질의응답

핵심어 질문 논문에서 추출한 답변
연소시스템에서 방향족 화합물이란? 방향족 화합물은 가솔린의 첨가제로 사용되어 옥탄가를 높이는 반면 매연 생성의 전구물질로 알려져 있다. 따라서 연소과정에서 매연 생성을 가져온다.
화염속도는 어떤 것의 영향을 받는가? 예혼합 화염의 기본적인 특징은 층류 화염속도를 갖고 있는 것이고, 예혼합 화염에서 중요한 파라미터이다. 화염속도는 당량비, 초기온도, 압력, 연료 종류, 첨가제 종류 등에 영향[19]을 받는다.
방향족 화합물에 속하는 대표적인 물질은 무엇인가? 방향족 화합물은 1개 이상의 링 구조를 가진 탄화수소 화합물로서 파라핀 계열의 탄화수소 화합물의 경우보다 개발된 상세한 화학반응 메카니즘이 제한되어 있다. 대표적인 것으로 톨루엔, 벤젠 등이 있다. 최근에는 다양한 조건(예혼합 화염, 분젠화염 등)의 실험에서 얻어진 결과와 비교 검토를 통해 톨루엔 및 벤젠에 대한 개선된 상세 화학반응 메카니즘들이 발표되고 있다.
질의응답 정보가 도움이 되었나요?

참고문헌 (20)

  1. E.S. Golovina and G.G. Fyodorov, Influence of physical and chemical factors on burning velocity, Sixth Symposium (International) on Combustion, The Combustion Institute Pittsburgh, 1956, 88-96. 

  2. S.G. Davis, H. Wang, K. Breinsky, and C.K. Law, Laminar flame speeds and oxidation kinetics of benene-air and toluene-air flames, Twenty-Sixth Symposium (International) on Combustion/The combustion institute, 1996, 1025-1033. 

  3. R.J. Johnston and J.T. Farrell, Laminar burning velocities and Markstein lengths of aromatics at elevated temperature and pressure, Proceedings of the Combustion Institute, 30 (2005) 217-224. 

  4. C. Ji, E. Dames, H. Wang, and F.N. Egolfopoulos, Propagation and extinction of benzene and alkylated benzene flames, Combustion and Flame, 159 (2012) 1070-1081. 

  5. D.A. Bittker, Detailed mechanism for oxidation of benzene, Combustion Science and Technology, 79 (1991) 49-72. 

  6. H.Y. Zhang and J.T. Mckinnon, Elementary reaction modeling of high-temperature benzene combustion, Combustion Science and Technology, 107 (1995) 261-399. 

  7. A. Ristori, P. Dagaut, A.E. Bakali, G. Penglon, and M. Cathonnet, Benzene oxidation results in a JDR and comprehensive kinetic modeling in JSR, shock-tube and flame, Combustion Science and Technology, 167 (2001) 223-256. 

  8. H. Richter, S, Granata, W.H. Green, and J.B. Howard, Detailed modeling of PAH and soot formation in a laminar premixed benzene/oxygen/argon low-pressure flame, Proceedings of the Combustion Institute, 30 (2005) 1394-1405. 

  9. K. Narayanaswamy, G. Blanquart, and H. Pitsch, A consistent chemical mechanism for oxidation of substituted aromatic species, Combustion and Flame, 157 (2010) 1879-1898. 

  10. G. Vourliotakis, G. Skevis, and M.A. Founti, A detailed kinetic modelling study of benzene oxidation and combustion in premixed flames and ideal reactors, Energy & Fuels, 25 (2011) 1950-1963. 

  11. CHEMKIN-PRO, Reaction Design Inc., San Diego, CA 92121, USA http://www.reactiondesign.com. 

  12. Z.M. Djurisic, Detailed kinetic modeling of benzene and toluene oxidation at high temperatures, MS Thesis, University of Delaware, 1999. 

  13. G.J. Gibbs and H.F. Calcote, Effect of molecular structure on burning velocity, J. Chem. Eng. Data, 4(3) (1959) 226-237. 

  14. H. Wang, X. You, A.V. Joshi, S.G. Davis, A. Laskin, F. Egolfopoulos, and C.K. Law, "USC Mech Version II, High-temperature combustion reaction model of $H_2/CO/C_1-C_4$ compounds," http://ignis.usc.edu/USC_Mech_II.htm, May 2007. 

  15. K.Y. Lee, T.H. Nam, H.S. You, and D.S. Choi, The Flame structure of freely porpagating $CH_4/O_2/N_2$ premixed flames on the $O_2$ enrichment, Trans. Korean Soc. Mech. Eng. B, 26(4) (2002) 555-560. 

  16. T.J. Kim, R.A. Yetter, and F.L. Dryer, New results on moist CO oxidation: high pressure, high temperature experiments and comprehensive, Twenty- Fifth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1994, 759-766. 

  17. GRI-Mech Version 3.0 7/30/99, http://www.me.berkeley.edu/gri_mech/. 

  18. T. Nagy and T. Yuranyi, Reduction of very large reaction mechanisms using methods based on simulation error minimization, Combustion and Flame, 156 (2009) 417-428. 

  19. S.R. Turns, An Introduction to Combustion, 2nd Ed., McGraw-Hill, 2000. 

  20. M.D. Smooke and V. Giovangigli, Formulation of the Premixed and Nonpremixed Test Problems, in Lecture Notes in Physics 384, Smooke, M.D. (Ed), Springer-Verlag, 1991. 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로