최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.39 no.1 = no.352, 2015년, pp.79 - 88
신명섭 (동양미래대학교 기계공학부) , 양승덕 (한양대학교 기계공학과) , 윤준용 (한양대학교 기계공학과)
This study numerically examined the mixing characteristics of rectangular cavity flows by using the hybrid lattice Boltzmann method (HLBM) applied to the finite difference method (FDM). Multi-relaxation time was used along with a passive scalar method which assumes that two substances have the same ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
기존의 전산유체역학은 어떻게 유동형태를 모사하였는가? | 일반적으로 기존의 전산유체역학(Computational Fluid Dynamics, CFD)은 연속체 가정에 기반을둔 지배방정식을 이용하여 유동형태를 모사하였다. 그러나 본 연구에서 사용되어진 격자볼츠만방법(lattice Boltzmann method, LBM)은 운동학 이론(kinetic theory)을 기반으로 하는 볼츠만 방정식을 이용하여 유체입자의 확률분포 변화를 통해 유동을 모사하는 수치해석 방법이다. | |
기존의 LB-SRT의 단점은 무엇인가? | 이러한 단일 완화시간으로 충돌항을 단순화한 기존의 LB-SRT 모델은 단순하고 적용이 용이하다는 장점을 가지고 있어 현재에도 대부분의 LBM 해석에 이용되고 있다. 그러나 높은 Re수의 유동해석과 급격하게 큰 구배를 보이는 영역인 정체점(stagnation point)과 날카로운 코너(sharp convex corner)와 같은 형상적으로 특이점인 영역의 유동해석에서는 수치해가 진동(spatial oscillations)하는 현상에 의하여 수치적인 안정성이 떨어지는 단점을 갖고 있다.(18) | |
본 연구에서 사용된 격자볼츠만방법은 유동형태를 어떻게 모사하는 방법인가? | 일반적으로 기존의 전산유체역학(Computational Fluid Dynamics, CFD)은 연속체 가정에 기반을둔 지배방정식을 이용하여 유동형태를 모사하였다. 그러나 본 연구에서 사용되어진 격자볼츠만방법(lattice Boltzmann method, LBM)은 운동학 이론(kinetic theory)을 기반으로 하는 볼츠만 방정식을 이용하여 유체입자의 확률분포 변화를 통해 유동을 모사하는 수치해석 방법이다. LBM을 이용한 수치해석은 미소유동(micro-flow),(11) 다공물질(porous medium) 내부와 다상유동(multi-phase flow), 난류에서의 오염물질 확산(12) 등과 같은 복합적인 유동(complex flow)(13) 분야까지 널리 적용 되고 있다. |
Burggraf, O. R., 1966, "Analytical and Numerical Studies of the Structure of Steady Separated Flows," Journal of Fluid Mechanics, Vol. 24, pp. 113-151.
Pan, F. and Acrivos, A., 1967, "Steady Flows in Rectangular Cavities," Journal of Fluid Mechanics, Vol. 28, pp. 643-655.
Ghia, U., Ghia, K. N. and Shin, C. T., 1982, "High-Re Solutions for Incompressible Flow Using the Navier-Stokes Equations and a Multigrid Method," Journal of Computational Physics, Vol. 48, pp. 387-411.
Shankar, P. N. and Deshpande, M. D., 2000, "Fluid Mechanics in the Driven Cavity," Annual Review of Fluid Mechanics, Vol. 32, pp. 93-136.
Mehta, U. B. and Lavan Z., 1969, "Flow in a Two-Dimensional Channel With a Rectangular Cavity," Journal of Applied Mechanics, Vol. 36, pp. 897-901.
Shen, C. and Floryan, J. M., 1985, "Low Reynolds Number Flow Over Cavities," Physics of Fluids, Vol. 28, pp. 3191-3202
Alkire, R. C., Deligianni, H. and Ju, J. B., 1990, "Effect of Fluid Flow on Convective Transport in Small Cavities," Journal of the Electrochemical Society, Vol. 139, pp. 2845-2855.
Occhialini, J. M. and Higdon, J. J. L., 1992, "Convective Mass Transport from Rectangular Cavities in Viscous Flow," Journal of the Electrochemical Society, Vol. 139, pp. 2845-2855.
Trevelyan, P. M. J., Kalliadasis, S., Merkin, J. H. and Scott, S. K., 2001, "Circulation and Reaction Enhancement of Mass Transport in a Cavity," Chemical Engineering Science, Vol. 56, pp. 5177-5188.
Chen, S. and Doolen, G. D., 1998, "Lattice Boltzmann Method for Fluid Flows," Annual Review of Fluid Mechanics, Vol. 30, pp. 329-364.
Shan, X., 1997, "Simulation of Rayleigh-Benard Convection Using a Lattice Boltzmann Method," Physical Review E, Vol. 55, pp. 2780-2788.
Lallemand, P. and Luo, L. S., 2003, "Hybrid Finite-Difference Thermal Lattice Boltzmann Equation," International Journal of Medern Physics, Vol. 17, pp 41-47.
McNamara, G. and Alder, B., 1993, "Analysis of the Lattice Boltzmann Treatment of Hydrodynamics," Physica A, Vol. 194, pp. 218-228.
Bhatnagar, P. L., Gross, E. P. and Krook, M., 1954, "A Model for Collision Processes in Gases. I. Small Amplitude Processes in Charged and Neutral One-Component Systems," Physical Review, Vol. 94, No. 5, pp. 511-525.
Lallemand, P. and Luo, L. S., 2000, "Theory of the Lattice Boltzmann method: Dispersion, Dissipation, Isotropy, Galilean Invariance, and Stability," Physical Review E, Vol. 61, pp. 6546-6562.
d'Humieres, D., 1992, "Generalized Lattice Boltzmann Equation," in Rarefied Gas Dynamics: Theory and Simulations, ed. by Shizgal, D, and Weaver, D.P, Progress in Astronautics and Aeronautics, Vol. 159, AIAA, Washington DC, pp. 450-458.
Treek, C. V., Rank, E., Krafczyk, M., Tolke, J. and Nachtwey, B., 2006, "Extension of a Hybrid Thermal LBE Scheme for Large-eddy Simulations of Turbulent Convective Flow," Computers & Fluids, Vol. 35, pp. 863-871.
Hou, S., Zou, Q., Chen, S., Doolen, G. and Cogley, A. C., 1995, "Simulation of Cavity Flow by Lattice Boltzmann Method," Journal of Computational Physics, Vol. 118, pp. 329-347.
Gupta, M. M. and Kalita, J. C., 2005, "A New Paradigm for Solving Navier-Stokes Equations: Streamfunction-velocity Formulation," Journal of Computational physics, Vol. 207, pp. 52-68.
Bruneau, C. H. and Jouron, C., 1990, "An Efficient Scheme for Solving Steady Incompressible Navier-Stokes Equations," Journal of Computational physics, Vol. 89, pp. 389-413.
Antonini, G., Gelus, M., Guiffant, G. and Zoulalian, A., 1981, "Simultaneous Momentum and Mass Transfer Characteristics in Surface-Driven Recirculating Flows," International Journal of Heat and Mass Transfer, Vol. 24, pp. 1313-1323.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.