최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기照明·電氣設備學會論文誌 = Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, v.29 no.1, 2015년, pp.64 - 69
강병칠 , 석정후 (영남대학교 대학원 전기공학과) , 민경준 (영남대학교 대학원 전기공학과) , 배성우 (영남대학교 전기공학과) , 이광식 (영남대학교 전기공학과) , 박원주
This study investigates the Horizontal surface discharge characteristics of solid insulators by varying their materials, and the dew-point of dry-air. The methodology of this study is that a quasi-uniform field is first applied to a test chamber. Then, the chamber is filled with dry-air as an insula...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
SF6 가스의 장점은? | SF6 가스는 열적·화학적으로 안정적인 특성과 우수한 절연성 및 차단성 때문에 고전압에서 초고압 전력기기 내의 절연매체 또는 소호매체로써 널리 사용하여왔다[2]. 하지만 이와 같은 배경으로 인하여 전력설비에서 SF6 가스의 사용량을 줄이기 위해서는 SF6가스를 대체할 수 있는 절연매질을 개발하거나, SF6가스의 회수량을 증가시키는 기술을 개발하는 것이 고려되어 지고 있다[3]. | |
준평등전계에서의 Dry Air 노점과 고체절연물의 재질 및 형상이 수평연면방전에 미치는 영향에 대한 결과는? | 1) Dry Air의 노점이 낮아짐에 따라 고체절연물의 수평연면방전 전압이 증가하였다. 2) 각 압력에서 고체절연물의 유전율이 낮을수록 수평연면방전 전압은 높았다. 그리고 수평연면방전전압은 Teflon, Polyethlene, Polyurethane의 순서로 높게 나타났다. 3) 고체절연물 표면에 매질의 압력이 증대되면 매질효과로 인해 수평연면방전 전압이 상승하였다. 4) 고체절연물의 전극간 거리가 길어질수록 수평연면방전 전압이 상승하였다. 5) 수평연면방전 전압을 향상시키려면 수평연면거리, 고체절연물의 재질, Dry Air의 노점, 전극의 재료 등을 고려하여야 할 것으로 생각한다. | |
SF6 가스 대체 절연매질로 고려되는 것은? | SF6 가스를 대체할 수 있는 절연매질로는 Dry-Air, N2, CF3I, N2:O2 혼합가스 등을 고려하고 있으며, 고체 및 진공을 매질로 사용하는 절연개폐장치에 대한 연구도 진행되고 있다[3-4]. |
Sun-Hee Park, "European Union and the Kyoto Protocol", ACEF Autumn Anuual Conference 2008, pp. 125-144, 2008.
L.G. Christophorou, J.K. Olthoff and R.J. Van Brunt, "Sulfur Hexafluoride and the Electric Power Industry", IEEE Electrical Insulation Magazine, Vol. 13, No. 5, pp. 20-24, September/October, 1997.
Toshiaki Rokunohe, Yoshitaka Yagihashi, Kenji Aoyagi, Takashi Oomori and Rumihiro endo, "Developrrent of SF6-free 72.5kV GIS", IEEE Trans. on Power Delivery, Vo1. 22, No. 3, pp. 1869-1876, July 2007.
TADAHIRO YOSHIDA, HIROMI KOGA, TAKAKAZU HARADA, SHINICHI MIKI, MASAHIRO ARIOKA, SHINJI SATO, SATORU YOSHIDA, NAOAKI INOUE, AKIHIKO MARUYAMA, and TOSHIE TAKEUCHI, "Insulation Technology in Dry-Air and Vacuum for a 72-kV Low-Pressure Dry-Air Insulated Switchgear", Electrical Engineering in Japan, Vol. 175, No. 1, 2011.
H.R. Park, J.H. Lee, E.H. Choi, S.G. Park, K.S. Park, K.S. Lee, "Surface discharge Characteristics for epoxy resin in Dry-Air with different electrode features", KIIEE Autumn Annual Conference 2008, pp.253-255, October 2008.
G.J. Min, B.C. Kang, D.Y. Lim, K.S. Lee, W.Z Park, "A Study of Surface discharge Characteristics for Dew-Point of Dry-Air and Materails of Shapes of Solid insulator in Quasi-Uniform Field", Journal of the KIIEE, Vol.27, No6, pp.44-49, June 2013.
Sang-Ho Lee, "Assess Breakdown Characteristics of Surface Discharge according to the Pressure Variaition of Solid Dielectrics in Different Media", a thesis submitted for the degree of doctor of Electrical Engineering, Yeungnam University, June 2010.
TADASHI KAWAMOTO. TADASU TAKUMA. HISASHI GOSHIMA, HIROYUKI SHINKAI, "Triple-Junction Effect and Its Electric Field Relaxation in Three Dielectrics", Electrical Engineering in Japan, Vol. 167, No. 1, 2009.
H. Craig Miller, "Surface Flashover of Insulators", IEEE Transactions on Electrical Insulation, Vol. 24, No. 5, October 1989.
H.R. Park, E.H. Choi, L.K. Kim, K.S. Lee, "Surface Discharge Characteristics for Epoxy Resin in Dry-Air with Variations of Electrode Features and Epoxy Resin Size", Journal of the KIIEE, Vol.23, No.2, February 2009.
Y.S. Kim, B.S. Lee, S.M. Baek, J.M. Jung, S.Y. Chung, S.H. Kim, "Characteristics of Surface on Partially Immersed of Spacer in Liquid Nitrogen", Journal of the Korean Institute of Electrical and Electronic Material Engineers, Vol. 13, No. 2, pp. 177-182, 2000.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.