최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기멤브레인 = Membrane Journal, v.25 no.4, 2015년, pp.343 - 351
이정무 (경상대학교 나노신소재융합공학과) , 박정호 (경상대학교 나노신소재융합공학과) , 김득주 (경상대학교 나노신소재융합공학과) , 이명건 (애경유화 중앙연구소) , 남상용 (경상대학교 나노신소재융합공학과)
In this study, we synthesis polyimide with high gas selectivity using 2,2-bis(3,4-carboxylphenyl) hexafluoropropane, 2,4,6-Trimethyl-1,3-phenylenediamine (DAM) and 4,4-Methylenedianiline (p-MDA), and then the asymmetric membrane was fabricated by non-solvent phase separation method. To confirm the p...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
용해-확산 모델에서 분리막을 통한 기체의 투과의 한계점을 보완하기 위한 연구에는 어떠한 것들이 있는가? | 용해-확산 모델에서 분리막을 통한 기체의 투과는 비 선택적인 분리막을 통한 투과인 Knudsen diffusion이나 viscous flow보다 매우 느리기 때문에 스킨층에 결함이 존재할 경우 실제 스킨층으로부터 얻어지는 선택도값보다 훨씬 낮은 결과값을 나타내게 된다. 따라서 분리막 제조 분야에서 결함이 없는 얇은 스킨층을 제조하기 위해 제막 용액의 조성, 제막 조건들에 대한 많은 연구가진행되고 있으며 고분자 농도, 용매의 선택, 휘발성 용매의 휘발 시간 등 인자들이 분리막 제조에 있어서 주요한 요소로 인식되고 있다. 최근 들어 폴리이미드 소재를 이용하여 기체분리막 시장이 점진적으로 증가하고 있으며 신규 합성된 고투과성 소재를 이용하여 분리막 형태로 제조하는 특성 평가가 진행하는 추세이다[11]. | |
얇은 스킨층을 지니는 비대칭형 분리막 제조시 어떠한 문제점이 있는가? | 이러한 이유 때문에 비대칭형 분리막에서 높은 투과도를 얻기 위해서는 매우 얇은 스킨층이 형성되어야 하며, 일반적으로 스킨층의 두께가 1 × 10-7~5 × 10-7 m 일 때 ultrathin-skinned membrane이라 하고 이 이하의 두께를 지닐 때를 hyperthin-skinned membrane이라 불리며 이 두 분리막 모두 상업적으로 유용한 투과도를 나타내기 위해 설계되었다[8]. 얇은 스킨층을 지니는 비대칭형 분리막 제조 시 고분자 사슬의 뒤틀린 구조와 스킨층 내부에서 고분자 사슬들끼리 완전히 합쳐지지 않아 스킨층 표면에 결함이 형성되는데 이로 인해 분리막의 기체 분리 성능이 크게 감소하는 문제점을 가지고 있다[9,10]. 용해-확산 모델에서 분리막을 통한 기체의 투과는 비 선택적인 분리막을 통한 투과인 Knudsen diffusion이나 viscous flow보다 매우 느리기 때문에 스킨층에 결함이 존재할 경우 실제 스킨층으로부터 얻어지는 선택도값보다 훨씬 낮은 결과값을 나타내게 된다. | |
분리막 제조 분야에서 결함이 없는 얇은 스킨층을 제조하기 위해 중요한 요인은 무엇인가? | 용해-확산 모델에서 분리막을 통한 기체의 투과는 비 선택적인 분리막을 통한 투과인 Knudsen diffusion이나 viscous flow보다 매우 느리기 때문에 스킨층에 결함이 존재할 경우 실제 스킨층으로부터 얻어지는 선택도값보다 훨씬 낮은 결과값을 나타내게 된다. 따라서 분리막 제조 분야에서 결함이 없는 얇은 스킨층을 제조하기 위해 제막 용액의 조성, 제막 조건들에 대한 많은 연구가진행되고 있으며 고분자 농도, 용매의 선택, 휘발성 용매의 휘발 시간 등 인자들이 분리막 제조에 있어서 주요한 요소로 인식되고 있다. 최근 들어 폴리이미드 소재를 이용하여 기체분리막 시장이 점진적으로 증가하고 있으며 신규 합성된 고투과성 소재를 이용하여 분리막 형태로 제조하는 특성 평가가 진행하는 추세이다[11]. |
R. E. Kesting and A. Fritzsche, "Polymeric gas separation membranes", pp. 1-14, John Wiley and Sons, New York, NY (1993).
T. Chung and X. Hu, "Effect of air-gap distance on the morphology and thermal properties of polyethersulfone hollow fibers", J. Appl. Polym. Sci., 66, 1067 (1997).
J. Cheng, D. Wang, F. Lin, and J. Lai, "Formation and gas flux of asymmetric PMMA membranes", J. Membr. Sci., 109, 93 (1996).
F. Lin, D. Wang, and J. Lai, "Asymmetric TPX membranes with high gas flux", J. Membr. Sci., 110, 25 (1996).
D. Koenhen, M. Mulder, and C. Smolders, "Phase separation phenomena during the formation of asymmetric membranes", J. Appl. Polym. Sci., 21, 199 (1977).
M. Mulder, "Basic principles of membrane technology", pp. 123-132, Kluwer Academic Publishers, London (1996).
W. B. Richard, "Membrane technology and applications", pp. 97-178, John Wiley and Sons, New York, NY (2012).
M. Wang, X. Zhu, and L. Zhang, "Hole structure and its formation in thin films of hydrolyzed poly (styrene maleic anhydride) alternating copolymers", J. Appl. Polym. Sci., 75, 267 (2000).
R. Datta, S. Dechapanichkul, J. Kim, L. Fang, and H. Uehara, "A generalized model for the transport of gases in porous, non-porous, and leaky membranes. I. Application to single gases", J. Membr. Sci., 75, 245 (1992).
I. Pinnau and W. J. Koros, "Gas permeation properties of asymmetric polycarbonate, polyestercarbonate, and fluorinated polyimide membranes prepared by the generalized dry-wet phase inversion process", J. Appl. Polym. Sci., 46, 1195 (1992).
T. S. Chung, S. K. Teoh, and X. Hu, "Formation of ultrathin high-performance polyethersulfone hollow-fiber membranes", J. Membr. Sci., 133, 161 (1997).
T. Chung and E. R. Kafchinski, "The effects of spinning conditions on asymmetric 6FDA/6FDAM polyimide hollow fibers for air separation", J. Appl. Polym. Sci., 65, 1555 (1997).
Y. Park, K. H. Lee, J. Yim, and J. Travas-Sejdic, "Controlling solvent diffusivity via architecture of nanopore structures in porous low-k films", Microporous Mesoporous Mater., 142, 91 (2011).
D. Shamiryan, M. Baklanov, P. Lyons, S. Beckx, W. Boullart, and K. Maex, "Diffusion of solvents in thin porous films", Colloids Surf., A, 300, 111 (2007).
S. M. Woo, J. J. Choi, and S. Y. Nam, "Preparation of hydroxy polyimde membranes for gas separation by phase inversion method", Membr. J., 22, 62 (2012).
M. K. Hahm, W. I. Sohn, Y. T, Lee, I. H. Kim, J. H. Kim, and S. B. Lee, "Preparation of asymmetric polyethersulfone membrane and its gas separation performance", Membr. J., 10, 130 (2000).
J. Han, D. Yang, S. Zhang, X. Liu, Z. Zhang, and X. Jian, "Effects of compatibility difference in the mixed solvent system on the performance of PPES hollow fiber UF membrane", J. Membr. Sci., 365, 311 (2010).
K. Kimmerle and H. Strathmann, "Analysis of the structure-determining process of phase inversion membranes", Desalination, 79, 283 (1990).
S. Pesek and W. Koros, "Aqueous quenched asymmetric polysulfone membranes prepared by dry/wet phase separation", J. Membr. Sci., 81, 71 (1993).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.