최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기멤브레인 = Membrane Journal, v.25 no.5, 2015년, pp.385 - 390
천봉수 (한남대학교 대덕밸리캠퍼스 화공신소재공학과) , 정성일 (한남대학교 대덕밸리캠퍼스 화공신소재공학과) , 임지원 (한남대학교 대덕밸리캠퍼스 화공신소재공학과)
To determine the pervaporation separation characteristics of IPA/water mixtures, PEI/PDMS hollow fiber membrane module commercialized by Airrane Co. was subjected to both lab and pilot tests. The flux of
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
투과증발은 무엇인가? | 먼저 투과증발(pervaporation)은 비 다공성 선택 투과막을 이용하여 공비혼합물이나 이성질체를 분리하는 막 분리 기술로[8] 막을 사용하여 한 쪽(공급측)에 혼합 용액을 넣고 다른 한 쪽(투과측)에 감압하거나 건조 공기 등을 흐르게 함으로써 투과 성분의 증기압을 낮게 유지하여 막 내부의 투과 속도 차에 의해 분리하는 방법이다. 역 삼투, 한외여과 등의 다른 막 분리법과는 달리 화학적 친화도 즉, 막 소재 물질과 분리하려는 대상 유기물 사이의 상호 작용에 의해 이루어지기 때문에 혼합물 중 특정 성분에 대한 선택도가 높은 비 다공성 고분자 복합막이 주로 사용되어진다. | |
투과증발공정은 어디에 사용되고 있는가? | 또한 투과증발공정은 다른 공정들에 비해 상대적 에너지 소비가 적은 효율적인 분리 기술로[9-15] 여타 분리공정에 비해 비교적 짧은 역사를 갖고 있지만 지속적으로 응용범위가 확대되고 있다. 요즈음 투과증발의 대부분은 바이오부탄올, 이소프로판올 및 다른 유기 용제류의 탈수를 위해 사용되고 있으며, 그중 유기용제의 탈수공정은 유기물의 분리공정에 비해 상당한 발전을 이루고 있다[16-19]. | |
비 다공성 고분자 복합막이 주로 사용되는 이유는 무엇인가? | 먼저 투과증발(pervaporation)은 비 다공성 선택 투과막을 이용하여 공비혼합물이나 이성질체를 분리하는 막 분리 기술로[8] 막을 사용하여 한 쪽(공급측)에 혼합 용액을 넣고 다른 한 쪽(투과측)에 감압하거나 건조 공기 등을 흐르게 함으로써 투과 성분의 증기압을 낮게 유지하여 막 내부의 투과 속도 차에 의해 분리하는 방법이다. 역 삼투, 한외여과 등의 다른 막 분리법과는 달리 화학적 친화도 즉, 막 소재 물질과 분리하려는 대상 유기물 사이의 상호 작용에 의해 이루어지기 때문에 혼합물 중 특정 성분에 대한 선택도가 높은 비 다공성 고분자 복합막이 주로 사용되어진다. 또한 투과증발공정은 다른 공정들에 비해 상대적 에너지 소비가 적은 효율적인 분리 기술로[9-15] 여타 분리공정에 비해 비교적 짧은 역사를 갖고 있지만 지속적으로 응용범위가 확대되고 있다. |
I. S. Chang and J. H. Kim "Development of environmentally sound technology for the water drying system", Clean Technol., 4(1), 68 (1998).
M. Lee, S. Y. Nam, and S. Y. Ha, "Pervaporation of water-isopropanol mixtures through polyaniline membranes doped with poly (acrylic acid)", J. Membr. Sci., 159, 41 (1999).
J. S. Kim, E. H. Cho, S. Y. Kang, S. I. Cheong, H. W. Park, C. H. Seo, and J. W. Rhim, "Pervaporation separation of water-isopropyl alcohol mixture using PVA/PAN hollow fiber composite membranes", Membr. J., 23, 170 (2013)
S. J. Kim, C. S. Lee, H. C. Koh, S. Y. Ha, S. Y. Nam, J. W. Rhim, and W. M. Choi, "Solvent resistance and gas permeation property of PEI-PDMS hollow fiber composite membrane for separation and recovery of VOCs", Membr. J., 22, 1 (2012).
R. Atkinson, "Atmospheric chemistry of VOCs and NOx", Atmos. Environ., 34, 12 (2000).
Y. M. Kim, S. Harrad, and R. M. Harrison, "Concentrations and sources of vocs in urban domestic and public micro environments", Environ. Sci. Technol., 35, 6 (2001).
M. J. Ruhl, "Recover VOCs via adsorption on activated carbon", Chem. Eng. Prog., 89, 7 (1993).
A. Baudot and M. Marin, "Dairy aroma compounds recovery by pervaporation", J. Membr. Sci., 50, 285 (1990).
R. A. Leonard, "Recent advances in centrifugal contactor design", Sep. Sci. Technol., 23, 1473 (1988).
S. S. Kim, H. Y. Kim, "Preparation of pervaporation composite membrane for butanol separation", Membr. J., 19, 54 (2009).
R. Y. M. Huang (Ed.), "Pervaporation membrane separation processes", Elsevier, Amsterdam (1991).
X. Feng and R. Y. M. Huang, "Liquid separation by membrane pervaporation: a review", Ind. Eng. Chem. Tes., 36, 1048 (1997).
J. S. Kim, C. S. Lee, E. H. Cho, and J. W. Rhim, "Pervaporation separation of isopropyl alcohol-water mixtures using poly(dimethyl siloxane) membrane", Membr. J., 23, 245 (2013).
B. Smitha, D. Suhanya, S. Sridhar, and M. Ramakrishna, "Separation of organic-organic mixtures by pervaporation: a review", J. Membr. Sci., 241, 1 (2004).
D. Roizard, R. Clement, P. Lochon, J. Kerres, and G. Eigenberger, "Synthesis, characterization and transport properties of a new siloxane-phosphazene copolymer. Extraction of n-butanol from water by pervaporation", J. Membr. Sci., 113, 151 (1996).
X. Feng and R. Y. M. Huang, "Blended chitosan and polyvinyl alcohol membranes for the pervaporation dehydration of isopropanol", J. Membr. Sci., 280, 815 (2006).
A. A. Kittur, S. M. Tambe, S. S. Kulkarni, and M. Y. Kariduraganavar, "Pervaporation separation of water-acetic acid mixtures through NaY zeolite in corporated sodium alginate membranes", J. Appl. Polym. Sci., 94, 2101 (2004).
H. I. Shaban, "Using pervaporation technique to separate water from organic", Chem. Eng. Process, 35, 429 (1996).
J. Sekulic, J. T. Elshof, and D. H. A. Blank, "Selctive pervaporation of water through a non-selective microporous titania membrane by a dynamically induced molecular sieving mechanism", Langmuir, 21, 508 (2005).
H. S. Choi, Y. T. Park, S. T. Nam, J. H. Jeon, and S. L. Lee, "The preparation of a polyimide membrane for the separation of water-acetic acid mixture through pervaporation", Membr. J., 9, 215 (1999).
J. Jegal and K. H. Lee, "Polymeric materials for pervaporation membranes", Membr. J., 7, 157 (1997).
C. O. Kweon and G. C. Paik, "A study on the removal of chlorinated organic hydrocarbon compounds in wastewater using RTV (Room Temperature Vulcanizing)-silicon rubber (PDMS) membrane by pervaporation", J. Korea Society of Environ-ment Aidministation., 5, 385 (1999).
D. P. Queiroz and M. N. D'Pinho, "Structural characteristics and gas permeation properties of polydimethylsiloxane/poly (propylene oxide) urethane/ urea bi-soft segment membranes", J. Polymer, 46, 2346 (2005).
B. D. Ratner, "Surface characterization of bio-materials by electron spectroscopy for chemical analysis", Analysis of Biomedical Engineering., 11, 313 (1983).
J. W. Rhim and Y. K. Kim, "Pervaporation separation of MTBE-Methanol mixtures using crosslinked PVA membranes", J. Appl. Polym. Sci., 75, 1699 (2000).
J. Chen, J. Li., J. Chen, Y. Z. Lin, and X. Wang, "Pervaporation separation of ethyl thioether/ hepta- nemixtures by polyethylene glycol membranes", Sep. Purif. Technol., 66, 3 (2009).
K. Y. Jee, E. J. Jeon, N. W. Kim, and Y. T. Lee, "Pervaperation of PVDF/PDMS composite membrane and separation of n-buranol/water mixtures by pervaporation", Membr. J., 19, 212 (2009).
J. Huang and M. M. Meagher, "Pervaporative recovery of n-butanol from aqueous solutions and ABE fermentation broth using thin-film silicalite- film silicone composite membranes", J. Membr. Sci., 192, 231 (2001).
R. Y. M. Huang and X. Feng, "Studies on solvent evaporation and polymer precipitation pertinent to the formation of asymmetric polyetherimide membranes", J. Appli. Poly. Sci., 57, 613 (1995).
D. Wang, K. Li, and W. K. Teo, "Preparation and characterization of polyetherimide asymmetric hollow fiber membranes for gas separation", J. Membr. Sci., 138, 193 (1998).
D. G. Jurn, Y. I. Park, and K. H. Leem "Gas permeation characteristics of surface-modified polyetherimide membranes", J. Korean Ind. Eng. Chem., 11(1), 34 (2000).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.