최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of the Korean Recycled Construction Resources Institute = 한국건설순환자원학회 논문집, v.3 no.4, 2015년, pp.335 - 341
김병철 (금호건설 설계팀) , 차태권 ((주)제이스코리아 설계본부) , 장판기 (동명기술공단 구조사업부) , 김찬우 (한국도로공사 도로처 도로포장팀) , 장일영 (금오공과대학교 토목공학과)
Various display devices has been increasing also using waste LCD glass in accordance with the used developed, because circumstances that are most landfill or incineration, are needed research on recycling measure of the using waste LCD glass. Therefore, in this study, to try to assess the basic mech...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
환경오염의 주범은 무엇인가? | 지구의 환경 오염문제가 전 세계의 공통적인 과제로 비추어 지면서 환경오염을 줄이기 위한 방법에 관심이 고조되고 있다. 환경을 오염시키는 방법에는 여러 가지가 있지만 시멘트를 생산하면서 발생되는 이산화탄소(CO2)는 환경오염의 주범이 되고 있다. 또한 급격한 산업발달로 인하여 대량의 산업폐기물이 발생되면서 재활용 되지 못하고 대부분 매립에 의존하여 토양 및 수질오염의 문제가 발생하고 있다. | |
급격한 산업발달로 인하여 어떤 문제가 발생하고 있는가? | 환경을 오염시키는 방법에는 여러 가지가 있지만 시멘트를 생산하면서 발생되는 이산화탄소(CO2)는 환경오염의 주범이 되고 있다. 또한 급격한 산업발달로 인하여 대량의 산업폐기물이 발생되면서 재활용 되지 못하고 대부분 매립에 의존하여 토양 및 수질오염의 문제가 발생하고 있다. 산업폐기물 중의 하나인 LCD폐유리 또한 각종 디스플레이 기기들이 개발되고 사용되면서 LCD를 적용한 각종 제품들이 널리 보급되고 있으며 이로 인해 LCD 폐유리 또한 날로 증가하고 있는 추세이다. | |
LCD 폐유리 미분말을 혼입한 콘크리트의 기본적인 재료역학 특성을 평가한 결론은 무엇인가? | 1. 슬럼프 플로 및 500mm 도달시간 분석 결과 LCD 폐유리 미분말 5% 배합에서 LCD-0 배합보다 효과가 우수했지만 그 이상 배합에서는 LCD 폐유리 미분말의 입자 표면적이 높고 입형이 방추형으로 접촉 면적이 증가하면서 점성이 증가하여 유동성이 떨어지는 것으로 판단된다. 2. 공기량 분석 결과 LCD 폐유리 미분말 5% 배합에서 목표 공기량에 만족하였으나 그 이상 혼합하였을 경우 미연소탄소의 연행공기량 흡착에 의해 공기량이 줄어든 것으로 나타났다. 3. LCD-0에 비해 낮은 압축강도를 보였으나, 치환율이 5-15%로 증가함에도 불구하고 압축강도가 큰 폭의 감소를 보이지 않았고 이는 경제성과 환경성을 고려할 때 충분히 사용가능한 강도를 구현한다고 할 수 있겠다. 4. 쪼갬인장강도 실험결과 압축강도와 유사한 경향을 보였으며, LCD 폐유리 미분말 15% 배합 7일 재령을 제외한 모든 배합에서 강도가 저하되는 경향을 나타냈다. 이는 사용재료의 불균질한 입도분포와 형상이 영향을 주는 것으로 판단된다. 5. LCD 폐유리 미분말의 혼합율에 상관없이 모든 실험결과에서 기존 LCD-0 배합보다 불리한 성능을 확인하였다. 이러한 문제점은 사용된 혼화재 및 LCD 폐유리 미분말의 비중차이와 LCD 폐유리 미분말 입경과 형상으로부터 기인한다고 판단된다. LCD 폐유리 미분말의 형상과 입경을 정규화하여 적용한다면 상기의 실험결과들을 향상 시킬 수 있을 것으로 사료된다. |
Choi, S.Y., Choi, Y.S., Won, M.S., Yang, E.I. (2015). Evaluation on the applicability of heavy weight waste glass as fine aggregate of shielding concrete, Journal of the Korea Institute for Structural Maintenance and Inspection [in Korean].
Chung, Y.S., Bae, S.H., Suk, Y.H. (1991). Experimental study on mehanical properties of glass concrete with powdered waste glasses, Environmental Science Institute in Chung-Ang University [in Korean].
Do, W.S. (2002). A Study on Characteristics of Concrete according to Using Mineral Admixture, Master's Thesis, Department of Civil Engineering, Yeungnam University [in Korean].
Gong, H.M., Jung, S.J. (2006). Study of strength development of ultra high-strength concrete, Journal of Architectural Institute of Korea [in Korean].
Gong, H.M., Yang, D.I., Jung, S.J. (2006). An experimental study for basic property of ultra high-strength concrete in a 100MPa class of specified concrete strength, Proceedings of the Korea Concrete Institute [in Korean].
Han, S.H., Park, W.S. (2009). Analysis of dynamic and static elastic modulus of in-situ marine concrete, Journal of Korean Society of Coastal and Ocean Engineers, 437-443 [in Korean].
Kang, W.S., Kim, K.S., Bae, J.S. (1997). An experimental study on physical properties of wasted glass and strength properties of wasted glass added concrete, Research of Engineering, Chonbuk National University [in Korean].
Kim, N.S. (2006). An experimental study on the fluidity and strength properties of ultra high-strength concrete utilizing crushed sand, Journal of Architectural Institute of Korea, 26(1) [in Korean].
Kim, S.D. (2013). Evaluation of Quality and Constructability for 80MPa Grade High-Strength Concrete Using Blast Furnace Slag and Fly-Ash, Ph.D Thesis, Department of Architectural Engineering, Dankook University [in Korean].
Kim, S.S., Ryou, J.S., Lee, S.T., Jung, H.S. (2009). Construction Materials Engineering, 3, 49-52 [in Korean].
Korea Environment Corporation (2013). Environmental Statistics Yearbook [in Korean].
Korea Institute of Civil Engineering and Building Technology (2014). Super Concrete of Manufacturing Specifications and Quality Control Guide [in Korean].
Seo, D.H., Jung, K.H., Kim, W.J., Lee, Y.D., Im, N.K., Jung, S.J. (2002). The experimental study on the basic test by mortar and the development of concrete material using powdered waste glasses, Journal of Architectural Institute of Korea [in Korean].
Yoon, S., Jeong, Y., Lee, S.Y., Kim, J.H., Kim, Y.B. (2007). The prediction of modulus of elasticity for the range from 60 to 100MPa in high strength concrete, Proceedings of the Korea Concrete Institute, 939-942 [in Korean].
Yoon, S.J., Park, J.M. (2012). A study on the possibility of concrete using waste LCD glass powder, Journal of Architectural Institute of Korea, 28(8) [in Korean].
You, Y.C., Lee, S.H., Choi, K.S., Yun, H.D., Kim, K.H. (2007). Static modulus of elasticity of concrete with recycled coarse aggregate, Proceedings of the Korea Concrete Institute, 875-878 [in Korean].
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.