$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

태양열 공기가열기의 흡열판 홀 배치와 형상에 따른 열적 성능에 관한 수치해석적 연구
A Numerical Study on the Thermal Performance of a Solar Air Heater Depending on the Hole Configuration and Geometry in the Absorber Plate 원문보기

한국태양에너지학회 논문집 = Journal of the Korean Solar Energy Society, v.35 no.1, 2015년, pp.69 - 80  

신재혁 (국방기술품질원) ,  부준홍 (한국항공대학교 항공우주 및 기계 공학부)

Abstract AI-Helper 아이콘AI-Helper

A series of numerical analyses was conducted to predict the thermal performance of a solar air heater depending on the hole configuration and geometry in the absorber plate. The planar dimensions of the prototype were 1 m (W) by 1.6 m (H), and the maximum air flow considered was $187m^3/h$

주제어

참고문헌 (11)

  1. Kumar, S. and Saini, R.P., CFD based performance analysis of a solar air heater duct provided with artificial roughness, Renewable Energy, Vol.34, pp. 1285-1291, 2009. 

  2. Yadav, A.S. and Bhagoria, J.L., A CFD based thermo-hydraulic performance analysis of an artificially roughened solar air heater having equilateral triangular sectioned rib roughness on the absorber plate, Int. J. of Heat and Mass Transfer, Vol.70, pp. 1016-1039, 2014. 

  3. Karmare, S.V. and Tikekar, A.N., Analysis of fluid flow and heat transfer in a rib grit roughened surface solar air heater using CFD, Solar Energy, Vol. 84, pp. 409-417, 2010. 

  4. Karwa, R. and Chitoshiya, G., Performance study of solar air heater having V-down discrete ribs on absorber plate, Energy, Vol. 55, pp. 939-955, 2013. 

  5. Wu, J.M. and Tao, W.Q., Effect of longitudinal vortex generator on heat transfer in rectangular channels, Applied Thermal Engineering, Vol.37, pp. 67-72, 2012. 

  6. Skullong, S. and Promvonge, P., Experimental investigation on turbulent convection in solar air heater channel fitted with delta winglet vortex generator, Chinese J. of Chemical Engineering, Vol.22, No.1, pp. 1-10, 2014. 

  7. Sun, W., Ji, J. and He, W., Influence of channel depth on the performance of solar air heaters, Energy, Vol.35, pp. 4201-4207, 2010. 

  8. Hu, J., Sun, X., Xu, J. and Li, Z., Numerical analysis of mechanical ventilation solar air collector with internal baffles, Energy and Buildings, Vol.62, pp. 230-238, 2013. 

  9. Ho, C.D., Chang, H., Wang, R.C. and Lin, C.S., Performance improvement of a double-pass solar air heater with fins and baffles under recycling operation, Applied Energy, Vol. 100, pp. 155-163, 2012. 

  10. Yang, M., Yang, X., Li, X., Wang, Z. and Wang, P., Design and optimization of a solar air heater with offset strip fin absorber plate, Applied Energy, Vol. 113, 1349-1362, 2014. 

  11. Fluent Inc., 1998, FLUENT 5 User's Guide, Vo1.2, pp.9-18-9-20. 

저자의 다른 논문 :

LOADING...

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로