최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기펄프 종이기술 = Journal of Korea TAPPI, v.47 no.1, 2015년, pp.75 - 83
김동성 (충남대학교 농업생명과학대학 환경소재공학과) , 성용주 (충남대학교 농업생명과학대학 환경소재공학과) , 김철환 (경상대학교 환경재료과학과) , 김세빈 (충남대학교 농업생명과학대학 산림환경자원학과)
The applicability of oil palm biomass, EFB(Empty Fruit Bunch) as raw materials for environmental friendly packaging material, pulp mold, was evaluated in this study. The changes in the water absorption properties of pulp mold by the addition of EFB and the surface treatments with PVA and AKD were an...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
탄소중립적인 바이오매스 자원으로의 관심이 높아지는 이유는 무엇인가? | 전 세계적으로 지구온난화 등 지구환경 보전이 더욱 중요한 이슈가 됨에 따라 기존 화석원료를 대체할 수 있는 탄소중립적인 바이오매스 자원으로의 관심도 더욱 높아지고 있다. 국내에서도 기후변화대응을 위하여 유럽 등의 선진국처럼 정책적으로 바이오매스 기반 연료의 사용을 유도하고 있어 바이오매스의 수요는 더욱 커지고 있고, 중국, 인도 등의 신흥개발국에서도 경제성장에 따른 다양한 목질 및 비목질 바이오매스 자원의 사용량이 증가하고 있는 상황이다. | |
오일팜은 주로 어디서 재배되는가? | 오일팜은 다양한 용도로 활용되는 팜오일의 생산을 위하여 열대우림지역에서 주로 재배되는데, 팜오일 열매(Oil palm fruit) 전 세계 수확량은 2010년 약 2억 2천 만톤에서 2013년에는 20% 증가한 2억 7천만톤으로 매년 지속적으로 증가하고 있다. 지역별로 인도네시아에서 1억 2천만 톤, 말레이시아에서 약 1억만 톤이 생산되었는데, 2010년 각각 약 9천 7백만 톤, 8천 5백만 톤에 비하여 꾸준히 그 생산량이 증가되고 있다. | |
신흥개발국에서 바이오매스 목질자원의 한계는 무엇인가? | 국내에서도 기후변화대응을 위하여 유럽 등의 선진국처럼 정책적으로 바이오매스 기반 연료의 사용을 유도하고 있어 바이오매스의 수요는 더욱 커지고 있고, 중국, 인도 등의 신흥개발국에서도 경제성장에 따른 다양한 목질 및 비목질 바이오매스 자원의 사용량이 증가하고 있는 상황이다. 그러나, 환경보호를 위한 천연림 보존 및 환경보존으로 인해, 추가적인 목질자원의 개발이 제한되는 등 전 세계적으로 목질 자원의 공급량은 한계에 달하고 있기 때문에 목질자원 등의 바이오매스 확보는 매우 시급한 실정이다.1,2) 늘어나는 바이오매스 수요에 대응하기 위한 바이오매스 대체 자원으로 동남아 지역 특히, 인도네시아와 말레이시아에서 주로 발생되는 오일팜 바이오매스가 많은 관심의 대상이 되고 있다. |
Kim, C. H., Kim, D. S., Sung, Y. J., Hong, H. E. and Kim, S. B., Evaluation of Defiberation by Organosolv Ethanolamine Pulping for Integral Utilization of Oil Palm, Journal of Korea TAPPI 45(1) : 67-48(2013).
Kim, D. S., Sung, Y. J., Kim, C, J. and Kim, S. B., Effects of pre-treatments on the Oil palm EFB fibers, Journal of Korea TAPPI 44(6) : 36-42(2012).
FAO Stat, 2015.
Sung Y. J., Kim, C. H., Cho, H. S., Sim, S. W. and Lee, G. S., Study of oil plam biomass resources(part 1) - characteristics of thermal decomposition of oil palm biomass -, Journal of Korea TAPPI 45(1) : 13-20 (2013).
Sung, Y. J., Kim, C. H., Cho, H. S., Kim, S. H., Sim, S. W., Yim, S. J., Lee, J. Y. and Kim, S. B., Study of oil palm biomass resources(Part 2) - Manufacturing characteristics of pellets using oil palm biomass -, Journal of Korea TAPPI 45(1) : 42-51(2013).
Kim, D. S., Sung, Y. J., Kim, C. H. and Kim, S. B., Evaluation of the applicability of oil palm EFB fines as a functional organic filler, Journal of Korea TAPPI 46(1) : 56-64(2014).
Park, I. S., Kim, J. N., Kim, D. Y. and Lee, Y. S., Effects of mixing ratio of ONP and OCC on physical properties of pulp molds for cushion packaging materials, Joural of Korea TAPPI 40(1) : 47-54(2008).
Korea Customs Service.
Sung, Y. J., Ruy, J. Y., Kim, J. H., Kim, K. T. and Song, B. K., Improvement of Drainage at wet pulp mold process, Journal of Korea TAPPI 36(3) : 52-59(2003).
Sung, Y. J., Ruy, J. Y., Kim, J. H., Kim, K. T. and Song, B. K., Optimization of wet pulp mold prcess and reduction of drying energy, Journal of Korea TAPPI 36(3) : 52-59(2004).
Kang, J. H. and Lim, H. A., Development of Higher functional Coating Agents for Pulp Mold (I) - Investigation of functions synthetic and natural coating agents -, Journal of Korea TAPPI 34(4) : 37-43 (2002).
Kang, J. H. and Lim, H. A., Development of Higher functional Coating Agents for Pulp Mold (II) - Investigation of functions synthetic and natural coating agents -Journal of Korea TAPPI 35(1) : 19-26(2003).
Kang, J. H. and Lim, H. A., Development of Higher Functional Coating Agents for Pulp Mold (III) - Manufacture of starch derivatives for coating -, Journal of Korea TAPPI 36(4) : 49-59(2004).
Kim, T. Y., Joung, Y. J., Kim, D. C. and Sung, Y. J., Effects of relative humidity on the physical properties of PVA impregnated paper, Journal of Korea TAPPI 42(3) : 37-42(2010).
Abdul Khalil, H. P. S., Ismail, H., Ahmad, M. N., Ariffin, A. and Hassan, K., The effect of various anhydride modifications on mechanical properties and water absorption of oil palm empty fruit bunches reinforced polyester composites, Polymer International 50:395-402(2001).
Kang, J. H., Lim, H. A. and Park, S. H., Development of High Functional Coating Agents for Pulp Mold (IV) - Manufacture of higher functional and biodegradable coating agents -, Journal of Korea TAPPI 38(1) : 45-53(2006).
Lee, M. W., Park, D. H. and Seo, Y. B., Effect of alkyl ketene dimer(AKD) on red algae reinforced biocomposites, Journal of Korea TAPPI Vol. 43(2) : 66-71(2011).
Shin, Y. D., Seo W. S. and Cho, N. S., Behavior of AKD in AKD-sized paper by heating treatment during ageing, Journal of Korea TAPPI 39(1) : 16-24 (2007).
Kim E. J., Park, J. H. and Park, I. K., The Study of Water Resistance and Water/Oxygen Barrier Properties of Poly(vinyl alcohol)/Water-soluble Poly (ethylene-co-acrylic acid) Blend Films, Appl. Chem. Eng. (23)2 : 217-221(2012).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.