본 논문에서는 스펙트럼 분석기를 이용하여 잡음 파라미터를 측정하는 2가지 방법을 제안하였다. 제안된 첫 번째 방법은 6-포트 회로망을 이용하여 잡음상관행렬을 측정하고, 이를 통해 잡음파라미터를 결정하는 방법이다. 그리고 제안된 두 번째 방법은 전원 임피던스의 변화에 따른 DUT의 잡음지수를 직접 측정하고, 이를 통해 잡음파라미터를 추출하는 방법이다. 전원 임피던스의 변화에 따른 잡음지수를 측정을 위해 스펙트럼 분석기를 이용, 임의의 전원 임피던스를 갖는 DUT의 잡음지수를 측정하는 방법과 전원 임피던스의 변화를 위해 사용한 임피던스 튜너가 DUT에 주는 잡음영향을 제거하는 방법을 보였다. 제안된 2가지의 방법으로 수동 및 능동 DUT에 대한 잡음파라미터를 측정하였고, 이를 비교하였다. 비교 결과, 2가지 방법에 대한 잡음 파라미터 결과가 일치하였다. 2가지 방법의 잡음 파라미터 결과가 일치하는 것은 6-포트 회로망으로 측정된 잡음파라미터가 전원 임피던스의 변화에 따라 측정된 DUT의 잡음지수를 정확히 예측한다는 것을 의미하며, 이를 통해 6-포트 회로망으로 측정된 잡음 파라미터 결과가 검증되었다.
본 논문에서는 스펙트럼 분석기를 이용하여 잡음 파라미터를 측정하는 2가지 방법을 제안하였다. 제안된 첫 번째 방법은 6-포트 회로망을 이용하여 잡음상관행렬을 측정하고, 이를 통해 잡음파라미터를 결정하는 방법이다. 그리고 제안된 두 번째 방법은 전원 임피던스의 변화에 따른 DUT의 잡음지수를 직접 측정하고, 이를 통해 잡음파라미터를 추출하는 방법이다. 전원 임피던스의 변화에 따른 잡음지수를 측정을 위해 스펙트럼 분석기를 이용, 임의의 전원 임피던스를 갖는 DUT의 잡음지수를 측정하는 방법과 전원 임피던스의 변화를 위해 사용한 임피던스 튜너가 DUT에 주는 잡음영향을 제거하는 방법을 보였다. 제안된 2가지의 방법으로 수동 및 능동 DUT에 대한 잡음파라미터를 측정하였고, 이를 비교하였다. 비교 결과, 2가지 방법에 대한 잡음 파라미터 결과가 일치하였다. 2가지 방법의 잡음 파라미터 결과가 일치하는 것은 6-포트 회로망으로 측정된 잡음파라미터가 전원 임피던스의 변화에 따라 측정된 DUT의 잡음지수를 정확히 예측한다는 것을 의미하며, 이를 통해 6-포트 회로망으로 측정된 잡음 파라미터 결과가 검증되었다.
In this paper, we propose two noise parameter measurement methods using spectrum analyzer. First method, we measure a noise correlation matrix using the 6-port network, and we calculate noise parameters using measured a noise correlation matrix. Second method, we directly measure noise figures of th...
In this paper, we propose two noise parameter measurement methods using spectrum analyzer. First method, we measure a noise correlation matrix using the 6-port network, and we calculate noise parameters using measured a noise correlation matrix. Second method, we directly measure noise figures of the DUT for source impedance changes, and then noise parameters are extracted from the measured noise figures. In order to measure a noise figure, we present a method of measuring a noise figure of the DUT that have arbitrary source impedances using spectrum analyzer and a method of eliminating a noise effect of a impedance tuner. Finally, the noise parameters of a passive and active DUT using proposed two methods are compared. The comparison shows that the two results obtained from for the two methods give almost identical noise parameters. The noise parameters measured by 6-port network accurately predict measured noise figures of the DUT for source impedance changes, and noise parameters measured by 6-port network is verified from the comparison.
In this paper, we propose two noise parameter measurement methods using spectrum analyzer. First method, we measure a noise correlation matrix using the 6-port network, and we calculate noise parameters using measured a noise correlation matrix. Second method, we directly measure noise figures of the DUT for source impedance changes, and then noise parameters are extracted from the measured noise figures. In order to measure a noise figure, we present a method of measuring a noise figure of the DUT that have arbitrary source impedances using spectrum analyzer and a method of eliminating a noise effect of a impedance tuner. Finally, the noise parameters of a passive and active DUT using proposed two methods are compared. The comparison shows that the two results obtained from for the two methods give almost identical noise parameters. The noise parameters measured by 6-port network accurately predict measured noise figures of the DUT for source impedance changes, and noise parameters measured by 6-port network is verified from the comparison.
잡음지수는 일반적인 2-포트 소자의 잡음 특성을 평가 하는 데 널리 사용되고 있다. 이 잡음지수는 2-포트 회로망에 연결되는 전원 임피던스(source impedance)의 함수이며, 전원 임피던스에 따른 잡음지수의 변화는 4개의 잡음 파라미터 NF m in , Rn및 Sopt를 알 경우 결정된다[1].
6-포트 회로망으로 측정된 수동 및 능동 DUT에 대한 잡음파라미터의 결과를 검증한 내용은?
그리고 이 두 가지 방법에 대한 결과 비교를 통해 6-포트 회로망으로 측정된 수동 및 능동 DUT에 대한 잡음파라미터의 결과를 검증하였다. 검증결과, 6-포트 회로망으로 측정된 잡음파라미터는 전원임피던스 변화에 따른 잡음지수를 정확하게 예측하는 것을 알 수 있었다.
잡음지수는 어떻게 결정되는가?
잡음지수는 일반적인 2-포트 소자의 잡음 특성을 평가 하는 데 널리 사용되고 있다. 이 잡음지수는 2-포트 회로망에 연결되는 전원 임피던스(source impedance)의 함수이며, 전원 임피던스에 따른 잡음지수의 변화는 4개의 잡음 파라미터 NF m in , Rn및 Sopt를 알 경우 결정된다[1]. 잡음 파라미터를 측정하는 통상적인 방법으로는 NFA(Noise Figure Analyzer)와 임피던스 튜너를 이용하여 측정하게 된다.
참고문헌 (11)
IRE Subcommittee on Noise, "IRE standards on methods of measuring noise in linear two ports 1959", Proc. IRE, vol. 48, pp. 60-68, Jan. 1960.
A. -R. Ahmed, K. -W. Yeom, "An extraction of two-port noise parameters from measured noise powers using an extended six-port network", IEEE Trans. on Microwave Theory and Tech., vol. 62, no. 10, pp. 2423-2434, Oct. 2014.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.