최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.28 no.1, 2015년, pp.93 - 100
조소훈 (창민우구조컨설탄트) , 이헌우 (창민우구조컨설탄트) , 박문재 (국립산림과학원 임산공학부) , 김태진 (창민우구조컨설탄트) , 김종호 (창민우구조컨설탄트)
Modern wooden structures usually are connected with steel fastener type connectors. And joints using multiple connectors in wooden structures will form semi-rigid connection. If connection in wooden structure would be designed to be pinned joint, the underestimate for loads transmitted through conne...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
목조 구조물에서 접합부를 강접합으로 가정할 경우 발생하는 문제는 무엇인가? | 일반적으로 목조 구조물에서 접합부를 강접합으로 가정할 경우에 접합부에 작용하는 하중이 너무 커서 과대 설계가 되기 쉽다. 그리고 접합부를 핀 접합으로 가정할 경우에는 접합부에 실제로 작용하는 하중보다 과소평가함으로써 접합부가 취약해지기도 한다. | |
목조 구조물에서 접합부를 핀 접합으로 가정할 경우 어떤 문제가 발생할 수 있는가? | 일반적으로 목조 구조물에서 접합부를 강접합으로 가정할 경우에 접합부에 작용하는 하중이 너무 커서 과대 설계가 되기 쉽다. 그리고 접합부를 핀 접합으로 가정할 경우에는 접합부에 실제로 작용하는 하중보다 과소평가함으로써 접합부가 취약해지기도 한다. 접합부의 합리적인 설계를 위해서는 접합부의 강성에 기인한 작용하중을 산정하는 것이 우선되어야 한다. | |
접합부의 합리적인 설계를 위해 필요한 것은 무엇인가? | 그리고 접합부를 핀 접합으로 가정할 경우에는 접합부에 실제로 작용하는 하중보다 과소평가함으로써 접합부가 취약해지기도 한다. 접합부의 합리적인 설계를 위해서는 접합부의 강성에 기인한 작용하중을 산정하는 것이 우선되어야 한다. 특히 대단면 부재가 적용되는 구조물처럼 접합부에 작용하는 하중이 큰 경우에서는 보다 정밀하고 합리적이고 정밀한 해석 및 설계기법이 요구된다. |
Awaludin, A. (2005) Moment Resistance Analysis on Various Configuration of Multiple-Bolt Timber Connection using Beam on Elastic Foundation Theory and Rigid Plate Assumption, 13, Media Komunikasi Teknik Sipil, pp.57-62.
Awaludin, A. (2005) Safety Factor of Timber Bolted-Connection Designed with SNI-5(2002), J. Teknik Sipil, 12, pp.87-92.
Awaludin, A., Smittakorn, W., Hayashikawa. T., Hirai, T. (2007) M- ${\theta}$ Curve of Timber Connection with Various Bolt Arrangements Under Monotonic Loading, J. Struct. Eng., 53A, pp.853-862.
Eratodi, I.B., Triwiyono, A., Awaludin, A., Prayitno, D.T. (2013) Perilaku Kekanik Sambungan Struktur Bambu Laminasi Menggunakan Pelat dan Paut, Konferensi Nasional Teknik Sipil, 7, pp.91-98.
Gattesco, N., Toffolo, I. (2004) Experimental Study on Multiple-Bolt Steel-to-Timber Tension Joints, Mater. & Struct., 37, pp.129-138.
Hwang, K., Homatsu, K. (2002) Bearing Properties of Engineered Wood Products I: Effects of Dowel Diameter and Loading Direction, J. Wood Sci., 48, pp.295-301.
Lee, D.G. Cho, S.H. Park, C.H. (2004) The Analytical Model Considering the Deformation of Panel Zone with Linear Element, Conf. Proc. Korea Comput. Struct. Eng., 17, pp.293-300.
Schneider, S.P., Amidi, A. (1998) Seismic Behavior of Steel Frames with Deformable Panel Zones, J. Struct. Eng., 124, pp.35-42.
Shim, N.H., Kim, D.K., Park, Y.S. (2012) An Experimental Study for Structural Performance Evaluation of Timber Truss Bridge, Journal of Korean Society of Civil Engineers, 60, pp.56-66.
Smith, I., Asiz, A., Snow, M. (2006) Design Method for Connections in Engineered Wood Structures, Faculty of Forestry and Environmental Management University of New Brunswick, Fredericton, pp.58-66.
Tsai, K.C., Popov, E.P. (1990) Seismic Panel Zone Design Effect on Elastic Story Drift in Steel Frames, J. Struct. Eng., 116, pp.3285-3301.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.