최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한치과기공학회지 = The Journal of Korean Academy of Dental Technology, v.37 no.2, 2015년, pp.57 - 62
Purpose: This study was performed to investigate mechanical properties of the porous Ti implants according to porosity. Porous Ti implant will be had properties similar to human bone such as microstructure and mechanical properties. Methods: Porous Ti implant samples were fabricated by sintering of ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
다공성 타이타늄 임플란트의 공극률과 기계적 특성의 상관관계는? | 1. 타이타늄(cp Ti) 분말 크기에 따른 다공성 타이타늄 임플란트의 공극률 25 ㎛ 이하 크기의 분말을 이용하여 제작된 다공성 타이타늄 임플란트의 공극률은 6.91%, 25~35 ㎛는 11.35%, 32~38 ㎛는 7.53% 그리고 38~45㎛의 크기는 17.51%의 공극률을 나타내었다. 2. 다공성 타이타늄 임플란트의 공극률에 따른 인장강도 6.91% 에서는 368 ㎫, 11.35% 에서는 263 ㎫, 7.53%에서는 168 ㎫, 그리고 17.51% 에서는 160 ㎫로 기공률이 커지면 인장강도는 낮아지는 경향을 보였다. 3. 다공성 타이타늄 임플란트의 공극률에 따른 탄성계수 6.91% 에서는 20.60 ㎬, 11.35% 에서는 28.46 ㎬, 7.53%에서는 19.31 ㎬, 그리고 17.51% 에서는 22.94 ㎬로 공극률에 큰 영향을 받지 않고 안정적인 경향을 보였다. | |
임플란트의 재료로 주로 사용되는 것은? | 기존의 치과 보철치료의 관행은 결손된 치아의 인접치를 사용하는 것이었지만 골내 임플란트에 대한 혁신적인 개발과 도전으로 성공률이 크게 호전되어 오늘날의 임플란트는 외상이나 치주질환 등에 의한 골 손실 부위에 광범위하게 적용되고 있다(Lee et al, 2010). 이러한 체내식립용 임플란트의 재료로는 기계적 특성이 뛰어나고 생체적합성이 우수한 타이타늄(cp Ti) 또는 타이타늄계 합금이 가장 많이 사용되고 있다(Long M, Rack HJ, 1998). 골 유착(ossteointegration)의 개념이 확립되던 초기에는 매끈한 표면의 타이타늄을 그대로 사용하였으나 최근까지 표면처리에 대한 연구가 지속되고 있으며, 인간의 뼈와 생물학적 고정에 있어서 임플란트의 표면 양상은 다공성표면이 유리하다고 하였다(Nishiguchi et al, 2001). | |
타이타늄과 타이타늄계 합금이 많이 사용되는 이유는? | 생체재료로 사용되는 금속재료 중에 타이타늄과 타이타늄계 합금이 가장 많이 사용되는 이유는 기계적 특성이 우수하고 부식저항성과 생체적합성이 높다는 것이지만 한 가지 큰 문제점은 탄성계수(Modulus of elasticity)의 불일치이다(Oh et al, 2003). Oh 등의 연구에서 인간의 뼈는 10~30 ㎬ 이며 타이타늄 임플란트는 110 ㎬ 이라고 보고하였다. |
Lee J, Decker JF, Polimeni G, Cortella CA, Rohrer MD, Wozney JM, Hall J, Susin C, Wikesjo UME. Evaluation of implants coated with rhBMP-2 using two different coating strategies: a critical-size supraalveolar periimplant defect study in dogs. J Clin Periodontol, 37, 582-590, 2010.
Long M, Rack HJ. Titanium alloy in total joint replacement-a materials science perspective. Biomaterials, 19, 1621-1639, 1998.
Nishiguchi S, Kato H, Fujita H, Oka M, Kim HM, Kokubo T, Nakamura T. Titanium metals form direct bonding to bone after alkali and heat treatments. Biomaterials, 22, 2525-2533, 2001.
Jo YJ, Lee CM, Jang HS, Lee NS, Suk J-H, Lee WH. Mechanical properties of fully porous and porous-surfaced Ti-6Al-4V implants fabricated by electro-discharge-sintering. Journal of Materials Processing Technology, 194, 121-125, 2007.
Oh IH, Nomura N, Hanada S. Microstructures and Mechanical Properties of Porous Titanium Compacts Prepared by Powder Sintering. Materials Transactions, 43(3), 443-446, 2002.
Oh IH, Nomura N, Masahashi N, Hanada S. Mechanical properties of porous titanium compacts prepared by powder sintering. Scripta Materialia, 49, 1197-1202, 2003.
Johnson AJW, Herschler BA. A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repair. Acta Biomaterialia, 7, 16-30, 2011.
Sumner DR, Turner TM, Igloria R, Urban RM, Galante JO. Functional adaptation and ingrowth of bone vary as a function of hip implant stiffness. Journal of Biomechanics, 31, 909-917, 1998.
Takemoto M, Fujibayashi S, Neo M, Suzuki J, Kokubo T, Nakamura T. Mechanical properties and osteoconductivity of porous bioactive titanium. Biomaterials, 26, 6014-6023, 2005.
Lee KM, Park SW, Lim HP, Koh JT, Kang SS, Kim HS, Park KB, Ryoo GH, Lee KK, Lee DJ. A Recent Research and Development Tendency of Dental Titanium Implant. Trent in Matals & Materials Engineering, 22(4), 33-40, 2009.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.