최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기콘크리트학회논문집 = Journal of the Korea Concrete Institute, v.27 no.3, 2015년, pp.283 - 290
양인환 (군산대학교 토목공학과) , 김경철 (군산대학교 토목공학과) , 조창빈 (한국건설기술연구원 구조융합연구소)
This paper proposes a method for predicting flexural strength of hybrid steel fiber-reinforced ultra-high strength concrete beams. It includes an experimental test framework and associated numerical analyses. The experimental program includes flexural test results of hybrid steel fiber-reinforced ul...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
강섬유 보강 콘크리트의 효과는 무엇인가? | 강섬유 보강 콘크리트는 콘크리트의 인성, 연성, 피로 및 충격에 대한 저항능력을 향상시킨다. 강섬유 보강 콘크리트는 초고강도의 발현, 인성의 증대 등을 통해 초고강도 콘크리트(UHSC: Ultra-High Strength Concrete)로 일컬어질 정도로 성능이 증대되고 있다1-3). | |
휨을 받는 강섬유보강 콘크리트 보의 처짐 및 휨강도에 관한 연구를 통해 어떤 결론을 얻을 수 있었는가? | 휨을 받는 강섬유보강 콘크리트 보의 처짐 및 휨강도에 관한 연구가 수행되었다15-18). 선행연구결과는 강섬유 보강 콘크리트 부재는 휨강도 및 전단강도를 향상시킬 뿐만 아니라, 특히 균열 이후 연성거동 특성을 향상시키는 것을 나타낸다. 기존의 선행 연구에서 제안된 강섬유 보강 콘크리트에 대한 대부분의 휨강도 평가기법은 압축 강도 80 MPa 이내 수준의 강섬유보강 콘크리트를 대상으로 수행되었으며, 이 연구에서 대상으로 하고 있는 150 MPa 이상의 강섬유 보강 초고강도 콘크리트의 휨강도을 예측하는 데 한계가 있다. | |
기존의 강섬유 보강 콘크리트 연구의 한계는 무엇인가? | 강섬유 보강 콘크리트는 콘크리트의 처짐 및 휨강도 특성을 향상시키고, 균열 이후 연성거동 특성을 향상시키는 것으로 알려진 바 있다4-6). 그러나, 기존의 강섬유 보강 콘크리트 연구7-12)는 주로 단일섬유로 보강된 초고성능 콘크리트에 대해 수행되었으며, 두 가지의 서로 다른 섬유를 혼입한 하이브리드 강섬유 보강 초고강도 콘크리트의 구조거동 특성에 관한 연구는 상대적으로 미비한 실정이다. 우리나라 콘크리트 구조설계기준을 포함한 대부분의 해외 설계기준에도 설계기법이 제한적인 상황이다. |
Yang, I. H. and Joh, C. B., "Moment-Curvature Analysis of Steel Fiber-Reinforced Ultra High Performance Concrete Beams with Tension Softening Behavior", Journal of the Computational Structural Engineering Institute of Korea, Vol.24, No.3, 2011, pp. 237-248.
Yang, I. H., Joh, C., and Kim, B. S., "Structural Behavior of Ultra High Performance Concrete Beams Subjected to Bending", Engineering Structures, Vol.32, No.11, November, 2010, pp. 3478-3487.
Yang, I. H., Joh, C. B., and Kim, B. S., "Flexural Strength of Large Scale Ultra High Performance Concrete Prestressed T-Beams", Canadian Journal of Civil Engineers, Vol.38, No.11, 2011, pp. 1185-1195.
Li, V. C. and Fischer, G., "Reinforced ECC - An Evolution from Materials to Structures", Proceedings of the 1st fib congress - Concrete Structures in the 21st Century, pp. 105-122, Osaka, 2002.
DAfStB, State-of-the-art Report on Ultra High Performance Concrete - Concrete Technology and Design, draft 3, Deutscher Ausschuss fur Stahltbeton/German Association for Reinforced Concrete, Berlin, Germany, 2003.
Yuguang, Y., Walraven, J., and Uiji, J. D., "Study on Bending Behavior of an UHPC Overlay on a Steel Orthotropic Deck", Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 639-646.
Si-Larbi, A., Ferrier, E., and Hamelin, P., "Flexural Behavior of Ultra High Performance Concrete Reinforced with Short Fibers and CFRP Rebars", Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, 2008, pp. 661-672.
Chunxiang, Q. and Patnaikuni, I. "Properties of High-Strength Steel Fiber-Reinforced Concrete Beams in Bending", Cement & Concrete Composites, Vol.21, 1999, pp. 73-81.
Manfred, T. and Jens, G. "Bending Design of Steel-Strengthened UHPC", Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, 2008, pp. 523-532.
American Concrete Institute, "Design Considerations for Steel Fiber Reinforced Concrete", ACI 544.4R-88, ACI Manual of Concrete Practice, Detroit, 1988.
Fedaral Highway Administration, Material Property Characterization of Ultra-High Performance Concrete, 2006, pp. 23-49.
Swamy, R. N. and Al-Ta'an, S. A., "Deformation and Ultimate Strength in Flexure of Reinforced Concrete Beams made with Steel fiber Concrete", ACI Structural Journal, 1981, Vol.78, No.5, 1981, pp. 395-405.
Alsayed, S. H., "Flexural Deflection of Reinforced Fibrous Concrete Beams", ACI Structural Journal, Vol.90, No.1, 1993, pp. 72-76.
Oh, B. H., "Flexural Analysis of Reinforced Concrete Beams Containing Steel fibers", Journal of Structural Engineering, ASCE, Vol.118, No.10, 1992, pp. 2812-2863.
Ashour, S. A. and Waff, F. F., "Flexural Behavior of Highstrength Fiber Reinforced Concrete Beams", ACI Structural Journal, Vol.90, No.3, 1993, pp. 279-287.
RILEM TC 162-TDF "Test and Design Methods for Steel Fibre Reinforced Concrete; Bending Test-Final Recommendation", Materials and Structures, Vol.35, No.253, 2002, pp. 579-582.
Japan Concrete Institute (JCI) Method of test for fracture energy of concrete by use of notched beam, JCI-S-002-2003.
Association Francaise du Genil Civil (AFGC) Betons fibres a ultra-hautes performances. Association Francaise du Genil Civil, 2013, France.
Hillerborg, A., Modeer, M., and Petersson, P. E., "Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements", Cement and Concrete Research, Vol.6, No.6, 1976, pp. 773-782.
Kitsutaka, Y. "Fracture Parameters by Polylinear Tensionsoftening Analysis", Journal of Engineering Mechanics, ASCE, Vol.123, No.5. 1997, pp. 444-450.
Yuguang, Y., Walraven, J., and Uiji, J. D., "Study on Bending Behavior of an UHPC Overlay on a Steel Orthotropic Deck", Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Germany, 2008, pp. 639-646.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.