최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국항해항만학회지 = Journal of navigation and port research, v.39 no.3, 2015년, pp.179 - 184
제현민 (한국해양대학교 대학원) , 박수용 (한국해양대학교 해양공간건축학과)
The purpose of this study is to provide appropriate methodology to ensure the safety and integrity of the production riser in offshore structure. In order to select integrity estimation methodology for production riser, level I and II Non-destructive Damage Evaluation (NDE) methods that were applied...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
고유진동수의 변화를 측정해 강성 감소를 추측하는 방법은 어떤 경우에 생산 라이저에 적합하지 않은가? | 구조물에 발생한 손상은 일반적으로 강성의 감소로 이어 지고 결론적으로 고유진동수의 변화를 초래한다는 점에 착안하여 고유진동수의 변화를 측정함으로 강성의 감소를 추측하는 방법이다(Crohas and Lepert, 1982). 손상 전과 후의 구조물의 고유진동수를 이용한 손상 지표가 다수 제안되었으나 구조물의 규모에 비하여 손상이 작을 경우 고유진동수에 미세한 변화만이 나타나므로 유용하지 않을 수 있기 때문에 생산 라이저에 적합하지 않다고 판단된다. | |
부유식 또는 유연식 구조물을 사용하여 자원 채취 시 무엇이 필수적으로 사용되는가? | 해양 자원 개발의 범위가 확대됨에 따라 해양구조물의 종류도 자켓 구조물과 같은 고정식 구조물에서 반잠수식 플랫폼, 인장각식 플랫폼, 시추 선박 등과 같은 부유식 또는 유연식 구조물로 변화하였다. 부유식 또는 유연식 구조물을 사용하여 자원을 채취하는 경우 필수적으로 라이저(Riser)가 사용된다. 라이저는 해저면과 해수면의 플랫폼을 연결하여 시추, 유체의 이송, 전기적인 연결, 그리고 수압 조절 등의 목적으로 이용되는 세장한 수직 파이프를 지칭한다(Seyed, 1989). | |
라이저는 무엇인가? | 부유식 또는 유연식 구조물을 사용하여 자원을 채취하는 경우 필수적으로 라이저(Riser)가 사용된다. 라이저는 해저면과 해수면의 플랫폼을 연결하여 시추, 유체의 이송, 전기적인 연결, 그리고 수압 조절 등의 목적으로 이용되는 세장한 수직 파이프를 지칭한다(Seyed, 1989). 실해역에서 라이저는 수압과 자중, 부력체에 의한 인장력 등의 정적하중과 파력, 해류력, 상부 플랫폼의 움직임에 따른 관성력, 풍하중, 지진하중 등의 동적하중을 받게 된다. |
American Petroleum Institute(API)(2004), API-Recommended Practice 5L 43 Edition: Specification for Line Pipe, API.
Cook, D. D. and Douglas, E.(2006), "Riser Integrity Management for Deepwater Developments", Offshore Technology Conference, OTC-17891.
Crohas, H. and Lepert, P.(1982), "Damage Detection Monitoring Method for Offshore Platforms is Field Tested", Oil and Gas J., Vol. 80 No. 8, pp. 94-103.
Ewins, D. J.(2000), Modal Testing : Theory, Practice and Application 2nd edition, Research Studies Press(R.S.P)
Furnes, G. K., Hassanein, T., Halse K. H. and Ericksen, E.(1998), "A Field Study of Flow Induced Vibration on a Deepwater Drilling Riser", Offshore Technology Conference, OTC-8702.
Gibson, J. D. and Melsa, J. L.(1975), Introduction to Nonparametric Detection with Applications, Academic Press.
Ho, Y. and Ewins, D.(2000), "On the structural damage identification with mode shapes", The European COST F3 Conference on System Identification and Structural Health Monitoring, pp. 677-686.
OrcaFlex(2010), OrcaFlex Manual, Orcina Ltd.
Roderick, Y., Edwards, Jr., Hennessy, W. F. and Campan, C. R.(1999), "Load Monitoring at the Touchdown Point of the Fist Steel Catenary Riser Installed in a Deepwater Moored Semisubmersible Platform", Offshore Technology Conference, OTC-10975.
Rytter, A.(1993), "Vibrational Based Inspection of Civil Engineering Structures", Ph. D. Department of Building Technology and Structural Engineering, University of Aalborg.
Seyed, F. B.(1989), "On the Dynamics of Flexible Riser and Suspended Pipe Spans", Ph. D. Department of Mechanical Engineering, University of London.
Stubbs, N., Kim, J. T. and Topole, K.(1992), "An Efficient and Robust Algorithm for Damage Localization in Offshore Platforms", American Society of Civil Engineers(ASCE) 10th Structures Congress, No. 1, pp. 513-546.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.