최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유화학회지 = Journal of oil & applied science, v.32 no.2, 2015년, pp.181 - 187
We found that we could manage the crystal size of active material by controlling the temperature on curing procedure which is one of the process to produce lead acid battery. The active material causes to improve initial efficiency and durability for the batteries. 3BS from the active materials afte...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
ISG 시스템은 무엇인가? | ISG 시스템은 정차 시 엔지 시동이 자동으로 꺼졌다가 브레이크에서 발을 떼면 자동으로 엔진 시동을 걸리게 하는 기술이다. ISG 시스템은 정차 시 엔진을 정지시켜 교통 체증 상황에서 발생할 수 있는 공회전 (Idling) 시간을 줄여 공회전시 발생하는 불필요한 연료의 낭비를 줄일 수 있다. | |
ISG 시스템의 장점은 무엇인가? | ISG 시스템은 정차 시 엔지 시동이 자동으로 꺼졌다가 브레이크에서 발을 떼면 자동으로 엔진 시동을 걸리게 하는 기술이다. ISG 시스템은 정차 시 엔진을 정지시켜 교통 체증 상황에서 발생할 수 있는 공회전 (Idling) 시간을 줄여 공회전시 발생하는 불필요한 연료의 낭비를 줄일 수 있다.[4] | |
AGM 격리판의 효과는 무엇인가? | 이와 같이 새로운 자동차용 배터리로 관심을 갖게 되는 VRLA 배터리는 일반 액식 납축전지와는 달리 AGM 격리판을 적용하였다. 이것은 양극과 음극을 분리하고 전해액의 흡수 기능이 있기 때문에 충전으로 인해 발생되는 수소와 산소가스를 격리판 내부에서 가스 재결합 (Gas recombination) 반응을 유도하여 전해액 손실이 없게 하는 효과가 있다.[8,9] |
Sejun Kim, Jiyoung Yu, Chongah Gwon, Hyungjoon Kim, "Idle Stop & Go System Development for Automatic-Transmission Vehicle", KSAE pp. 647-652, 2011.
Jiyong Yu, Minyoung Jung, Junyong Lee, Myungsik Choi, Kwangyein Kim, "A Development of More Cost Effective AT ISG System", KSAE pp. 121-126, 2012.
Jaewoo Jung, Soono Kwon, Jungpyo Hong, Jiyoung Lee, Yangsu Lim, Yoon Hur, "The Optimal Design and Characteristic Analysis of Distributed and Concentrated Winding type of Interior Permanent Magnet Moter for ISG", KSAE06-F0255, pp. 1634-1640. 2006.
Chonghyeon Cheong, Yunhui Park, "Simple Vehicle Modeling for Fuel Economy Effect of Auto-Stop", KSAE 2009 Annual Conference & Exhibition, pp. 532-536, 2011.
Chih-Hsien Yu, Hao-Yuan Tseng, "Development of an Automatic Idling Stop and Go Control Apparatus for an EFI Scooter", Journal of Circuits, Systems, and Computers Vol.23, No. 4 1450044 (28 pages), 2014.
B. Drenchev, M. Dimitrov, V. Boev, Absorptive glass mat separator surface modification and its infilence on the heat generation in valve-regulated lead-acid battery, J. Power Sources, 280, p.p 66-73 (2015).
V. Naidenov, D. Pavlov, M. Cherneva, Three-layered absorptive glass mat separator with membrane for application in valve-regulated lead-acid batteries, J. Power Sources, 192, p.p 730-735 (2009).
Hammouche Abderrezak, Thele Marc, Sauer Dirk Uwa, Analysis of gassing processes in a VRLA/spiral wound battery, J. Power Sources, 158, p.p 987-990 (2009).
A. Kirchev, D. Pavlov, B. Monahov, Gas-diffusion approach to oxygen recombination in lead-acid batteries, J. Power Sources, 113, p.p 245-254 (2003).
Jeong Soon-Wook, Ku Bon-Keun, Effects of 4BS Crystal Size on the Positive Plate Behavior in Lead Acid Battery, J. of Korean Oil Chemists' Soc., 26, p.p 335-340 (2009).
R. Wagner, Failure modes of valveregulated lead/acid batteries in different applications, 4th European lead battery conference, p.p 153-162 (1995).
S. Laruelle, Grugeon-Dewaele, L. Torcheux, A. Delahaye-Vidal, The Curing Reaction Study of the Active Material in the Lead Acid Battery, J. Power Sources, 77, p.p 83-89 (1999).
Jenn-shing Chen, L. F. Wang, Effect of Curing on Positive-Plate Behaviour in Electric Scotter Lead/Acid Cells, J. Power Sources, 70, p.p 269-275 (1998).
Jeong Soon-Wook, Ku Bon-Keun, Effects of 4BS Crystal Size on the Positive Plate Behavior in Lead Acid Battery, J. of Korean Oil Chemists' Soc., 26, p.p 335-340 (2009).
D. Pavlov, Lead/Acid Battery Positive Plates Manufactured from 4PbO.PbSO4 Pastes Prepared from Leady Oxide and Red Lead, J. Power Sources, 31, p.p 189-201 (1990).
Ku Bon-Keun, Jeong Soon-Wook, Effects of Curing Conditions on the Chemical Compositions of Positive Plate for Lead Acid Battery Plates, J. of Korean Oil Chemists' Soc., 23, p.p 347-354 (2006).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.