순환골재는 건설폐기물을 재활용함으로써 자원절약 및 대체자원의 개발과 환경보호의 측면에서 국가 사회적으로 많은 이점을 가지고 있다. 하지만 낮은 밀도와 높은 흡수율을 가지는 저품질 순환골재는 구조용 콘크리트 골재로 사용되지 못하고 주로 저부가가치로 사용되고 있다. 고품질 순환골재를 생산하기 위해서는 골재와 골재에 부착된 구모르타르를 효과적으로 제거해야 한다. 최근 물리적 화학적 방법을 이용하여 구모르타르를 효율적으로 제거하기 위한 연구가 행해지고 있으나, 고품질 순환잔골재의 생산 조건에 관한 정량적 연구는 아직 부족한 실정이다. 따라서 본 연구에서는 고품질 순환잔골재를 생산하기 위해서 황산과 저속습식마쇄기를 이용하여 구모르타르를 효과적으로 제거할 수 있는 최적 조건을 제시하고자 하였다. 황산의 몰비와 골재비율에 따른 순환골재의 실험결과 밀도, 흡수율, 실적율은 기준을 만족시키는 결과를 나타내고 있는 것을 알 수 있었다.
순환골재는 건설폐기물을 재활용함으로써 자원절약 및 대체자원의 개발과 환경보호의 측면에서 국가 사회적으로 많은 이점을 가지고 있다. 하지만 낮은 밀도와 높은 흡수율을 가지는 저품질 순환골재는 구조용 콘크리트 골재로 사용되지 못하고 주로 저부가가치로 사용되고 있다. 고품질 순환골재를 생산하기 위해서는 골재와 골재에 부착된 구모르타르를 효과적으로 제거해야 한다. 최근 물리적 화학적 방법을 이용하여 구모르타르를 효율적으로 제거하기 위한 연구가 행해지고 있으나, 고품질 순환잔골재의 생산 조건에 관한 정량적 연구는 아직 부족한 실정이다. 따라서 본 연구에서는 고품질 순환잔골재를 생산하기 위해서 황산과 저속습식마쇄기를 이용하여 구모르타르를 효과적으로 제거할 수 있는 최적 조건을 제시하고자 하였다. 황산의 몰비와 골재비율에 따른 순환골재의 실험결과 밀도, 흡수율, 실적율은 기준을 만족시키는 결과를 나타내고 있는 것을 알 수 있었다.
Recycled aggregate by the recycling construction waste has a lot of advantage such as the developing the alternative resource and protecting of environment. However, recycled aggregate is used as the low quality grade, because it is difficult to remove old mortar from aggregate. To use the recycled ...
Recycled aggregate by the recycling construction waste has a lot of advantage such as the developing the alternative resource and protecting of environment. However, recycled aggregate is used as the low quality grade, because it is difficult to remove old mortar from aggregate. To use the recycled aggregate as high quality grade, it is important to develop the technology to produce the high quality recycled aggregate. To manufacture the high quality recycled aggregate, old mortar attached on the aggregates should be removed efficiently. Therefore, in this study, we suggested the optimum condition to remove old mortar effectively using sulfuric acid and low speed wet rotary mill for high quality recycled fine aggregate. The results shows that the recycled aggregate satisfy on the standards of KS F 2573 in density, absorption and solid volume, when adequate condition of sulfuric mole ratio and aggregate ratio are make.
Recycled aggregate by the recycling construction waste has a lot of advantage such as the developing the alternative resource and protecting of environment. However, recycled aggregate is used as the low quality grade, because it is difficult to remove old mortar from aggregate. To use the recycled aggregate as high quality grade, it is important to develop the technology to produce the high quality recycled aggregate. To manufacture the high quality recycled aggregate, old mortar attached on the aggregates should be removed efficiently. Therefore, in this study, we suggested the optimum condition to remove old mortar effectively using sulfuric acid and low speed wet rotary mill for high quality recycled fine aggregate. The results shows that the recycled aggregate satisfy on the standards of KS F 2573 in density, absorption and solid volume, when adequate condition of sulfuric mole ratio and aggregate ratio are make.
이에 본 연구에서는 기존 순환골재 생산 방식 중 문제시 되어온 파·분쇄 방법의 문제점을 보완한 마쇄기의 효율 특성과 강알칼리수를 중화시켜 순환 잔골재를 생산할 수 있는 조건에 대하여 검토․ 분석하고자 하였다.
제안 방법
본 연구는 피분쇄물인 굵은 골재 및 산성수를 이용한 마쇄방법에 의하여 고품질 순환 잔골재를 생산하는데 있어서 최적 마쇄 조건을 검토하기 위한 기초 연구이다. 이를 위해 수차례의 예비실험을 통하여 실험조건을 굵은 골재비(순환잔골재에 대한 굵은 골재 중량비), 황산수몰비(공정수에 대한 황산의 몰수)로 설정하였으며 각 수준별 실험 결과를 비교 · 검토하여 마쇄기 운전 조건과 공정 수를 산성수(H2SO4)로 대체하여 순환잔골재 제조 시 적정 황산양을 검토하였다.
대상 데이터
본 실험에서 사용된 골재는 충남 천안 G사에서 생산한 골재를 사용하였으며, 황산은 무색을 띠는 순도 95%인 D사 제품을 사용하였다.
성능/효과
1. 황산수와 저속습식마쇄기를 이용하여 제조한 순환잔골재는 절건밀도 2.53g/cm3, 흡수율 3.1%로 순환잔골재 품질기준인 절건밀도 2.2g/cm3 이상, 흡수율 5%이하를 만족하는 순환잔골재를 얻을 수 있었다.
2. 황산수를 사용하여 품질이 향상된 것은 황산의 산성분이 골재에 포함되어 있는 구모르타르의 수산화칼슘과 반응하며 그 과정에서 반응생성물인 석고로 석출되어 이 반응 골재와 시멘트페이스트 부착 경계면의 부착력을 저하시켜 마쇄 시 시멘트페이스트 성분이 활발하게 탈리되어 마쇄효율이 증가한 것으로 사료된다.
3. 본 실험에서 나타난 pH11 이상의 값은 골재에 포함되어 있는 시멘트페이스트 성분을 완전히 반응시키지 못했음을 나타내는 것으로서 pH6~7의 중성상태를 유도하기 위해서는 더 많은 산이 필요한 것으로 판단된다.
후속연구
4. 본 실험결과 황산수와 저속습식 마쇄기의 적용가능성을 확인할 수 있었으나, 더욱 효율적인 마쇄기 운전조건을 위한 추가적인 검토와 생산된 골재의 품질확보 및 안전성을 위한 후속연구가 필요할 것으로 판단된다.
질의응답
핵심어
질문
논문에서 추출한 답변
고품질 순환골재와 관련한 연구 실정은 어떠한가?
고품질 순환골재를 생산하기 위해서는 골재와 골재에 부착된 구모르타르를 효과적으로 제거해야 한다. 최근 물리적 화학적 방법을 이용하여 구모르타르를 효율적으로 제거하기 위한 연구가 행해지고 있으나, 고품질 순환잔골재의 생산 조건에 관한 정량적 연구는 아직 부족한 실정이다. 따라서 본 연구에서는 고품질 순환잔골재를 생산하기 위해서 황산과 저속습식마쇄기를 이용하여 구모르타르를 효과적으로 제거할 수 있는 최적 조건을 제시하고자 하였다.
순환골재는 어떤 이점을 가지고 있는가?
순환골재는 건설폐기물을 재활용함으로써 자원절약 및 대체자원의 개발과 환경보호의 측면에서 국가 사회적으로 많은 이점을 가지고 있다. 하지만 낮은 밀도와 높은 흡수율을 가지는 저품질 순환골재는 구조용 콘크리트 골재로 사용되지 못하고 주로 저부가가치로 사용되고 있다.
낮은 밀도와 높은 흡수율을 가지는 저품질 순환골재는 무엇으로 사용되는가?
순환골재는 건설폐기물을 재활용함으로써 자원절약 및 대체자원의 개발과 환경보호의 측면에서 국가 사회적으로 많은 이점을 가지고 있다. 하지만 낮은 밀도와 높은 흡수율을 가지는 저품질 순환골재는 구조용 콘크리트 골재로 사용되지 못하고 주로 저부가가치로 사용되고 있다. 고품질 순환골재를 생산하기 위해서는 골재와 골재에 부착된 구모르타르를 효과적으로 제거해야 한다.
참고문헌 (8)
Kim H.S., Kim, J.M., Sun, J.S., Choi, H.G., Jang, S.Y., Lim, D.B. (2007). A fundamental study on the manufacrure of high quality recycled fine aggregate by experiment design, Proceedings of the korea concrete institute, 19(1), 617-620 [in Korean].
Kim J.M., Kim H.S., Sun, J.S., Kwak E.G., Han, K.S., Jun M.H. (2006). Experimental study on physical properties of circulation bone material by acid treatment, Journal of korea society of waste management, Proceedings of the Korea society of waste management, 20(1), 331-335 [in Korean].
Kim J.M., Kim H.S., Sun, J.S., Kwak E.G., Lim D.B et al. (2006). Study of the quality of circulation bone material by grinding method using a $CO_2$ gas, Proceedings of the Korea society of waste management, 20(2), 344-348 [in Korean].
LHI. (2006). Recycling policy and technology development trend of construction waste, Land&Housing institute, Gyeongnam, South Korea.
MOILT. (1997). A study on the development of recycling phosphorus system and recycling technology of the construction industry waste, Minister of Land, Infrastructure and transport, Construction & transportation R & D report, Gyeonggi-Do, South Korea.
MOILT. (2002). Quality standards of the recycling of construction waste and measures to promote, Minister of Land, Infrastructure and transport, Construction & transportation R & D report, Gyeonggi-Do, South Korea. 6-125.
MOILT. (2005). Studies on the long-term stability of the recycled aggregate and recycled aggregate concrete structures of structure, Minister of Land, Infrastructure and transport, Construction & transportation R & D report, Gyeonggi-Do, South Korea.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.