최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국해양환경ㆍ에너지학회지 = Journal of the Korean Society for Marine Environment & Energy, v.18 no.3, 2015년, pp.207 - 215
이승희 (홍익대학교 과학기술대학 바이오화학공학과) , 박종원 (홍익대학교 과학기술대학 건축공학과) , 윤구영 (홍익대학교 과학기술대학 기계정보공학과)
In the last decade, increasing national research fund for recycling the waste FRP (fiber reinforced plastics) ships which has caused environmental problems, improves the technology making concrete-reinforcing fibers out of the waste FRP. Furthermore, the concrete with recycled FRP fiber was tested f...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
폭렬(spalling) 현상을 방지하기 위한 방법으로써 어떠한 연구가 진행되어져 왔는가? | 한편 초고층 구조물에 사용되는 고강도 콘크리트는 화재 시 콘크리트 내부에 수증기압이 발생하는데 고강도 콘크리트의 경우, 이 수증기압이 외부로 충분히 배출되지 못함으로써 내부 응력에 의한 폭렬(spalling) 현상이 발생할 수 있다(NISTIR[1996], Song[2004]). 이러한 폭렬 현상을 방지하기 위한 방법으로써 폴리프로필렌(PP) 섬유나 폴리론 파이버(PF) 섬유를 혼입시켜주는 방안에 대한 연구가 진행되어 왔다 (Yoo et al.[2009], Han et al. | |
설치한 컨베이어의 선정조건으로 무엇이 필요한가? | 설치한 컨베이어의 선정조건으로는 ① 시설 ② 운반물 ③ 운반량 ④ 운반경로 ⑤ 운반방법 ⑥ 설치장소 ⑦ 설비효과 등이 필요하다. | |
대부분의 FRP는 무엇으로 만들어진 복합재인가? | 대부분의 FRP는 불포화 폴리에스테르수지와 유리섬유를 적층하여 만들어진 복합재이므로 로빙면포추출기를 통해 폐 FRP 선박으로 부터 유리섬유층을 분리해 내는 과정에서 유리섬유보다는 폴리에스테르수지가 더 많은 가루(이하 재활용 수지가루)가 발생한다. 반면에 유리섬유층으로부터 콘크리트의 강도 보강을 위해 Fig. |
Kim, Y.S., Shim, S.M., Yoon, K.Y. and Kim, S.D., 2004, "Develoipment of technology for environmentally friendly scrapped FRP ship treatment", Technology for Waste Material Recycling from KIEST.
Kim, Y.S., Lee, S.H. and Yoon, K.Y., 2007, "A recycling technology for waste FRP by development of FRC and its products", Technology for Waste Material Recycling, Eco-Technopia 21 Project from KIEST.
Baek, J.H., Kim, Y.S., Yoon, K.Y., Lee, S.H. and Park, J.W., 2010, "Seismic performance of reinforced concrete beam-tocolumn joints strengthened with recycled fibres from fiber-reinforced plastics", Korean, 2010, "A recycling technologyhigh of strength concrete reinforced for with recycled fibres from fiberreinforced plastics", Technology for Waste Material Recycling, Eco-Technopia 21 Project from KIEST.
Park, J. and Baek, J., 2009, "Mechanical properties of high strength concrete reinforced with recycled fibres from fiber-reinforced plastics", Journal of the Architectural Institute of Korea Structure & Construction, Vol. 25, No. 8, pp. 127-134.
Park, J.W. and Paek J.H., 2010, "Structural performance of reinforced concrete members strengthened with recycled fibres from fiber-reinforced plastics", Journal of the Architectural Institute of Korea Structure & Construction, Vol. 26, No. 7, pp. 37-44.
Park, J.W. and Peek, J.H., 2011, "Seismic Performance of Reinforced Concrete Beam-to-Column Joints Strengthened with Recycled Fibres from Fiber-Reinforced Plastics", Korean Society of Disaster & Security, Vol. 11, No. 6, pp. 25-30.
Shun, D.W., Ghim, Y.S., Bae, D.H., Cho, S.H. and Son, J.E., 1995, "Bench - scale fluidized - bed plastic waste pyrolysis", Korea Society of Waste Management, Vol. 12, No. 1, pp 120.
Yoo, S.H., 2009, "Spalling reduction method of high strength reinforced concrete columns using fibers", Journal of Korean Insitute of Fire Sci. & Eng., Vol. 23, No. 4, pp. 1-6.
Han, C.G., Yang, S.H., Lee, B.Y. and Hwang, Y.S., 1999, "A study on the spalling properties of high-performance concrete with the kinds of aggregate and polypropylene fiber contents", Journal of the Korea Concrete Institute, Vol. 11, No. 5, pp. 69-78.
NISTIR 5934, 1996, "Fire performance of high-strength concrete : a report of the state-of-the-art", NIST, Dec.
Song, H., Hyung, W. K., Do, J.Y. and So, Y.S., 2004, "Explosive spalling dependent on compressive strength concrete including silica fume", Journal of Architectural Institute of Korea. Sep. Vol. 20, No. 9, pp. 111-117.
Pierre Kalifa, 2001, "High-temperature behaviour of HPC with polypropylene fibers from spalling to microstructures", Cement and Concrete Research, Jun. pp. 1487-1499.
Yoon, K.Y., Kim, Y.S. and Lee, S.H., 2007, "Recycle of the glass fiber obtained from the roving cloth of FRP I: study for the physical properties of fiber-reinforced mortar", Journal of the Korean Society for Marine Environment and Energy, Vol. 10, No. 2, pp. 102-106.
Yoon, K.Y., Kim, Y.S. and Paek, J.H., 2009, "The extracting system for waste FRP roving layer", Korea Patent No. 10-2009-0008129.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.